I did some mods to my side panel , have a look
http://img527.imageshack.us/img527/2...6164207qv6.jpg
Printable View
I did some mods to my side panel , have a look
http://img527.imageshack.us/img527/2...6164207qv6.jpg
Nuts. Re-re-design then.Quote:
Originally Posted by CyberDruid
Now where did I put that drawing board??
Infinate, cheers..UKWhite huh ?....dont take this the wrong way as its been 12 years since I left England but is that Leeds ?
Good luck with your build :)
Yup :clap:Quote:
Originally Posted by usblades
Always been a bit partial to Leeds since Keith Edwards played for em.
You guys are on fire this season...then again starting with -15 you had to be :clap:
Could you give some tips on hiding the SATA cables Timber.
my suggestion isQuote:
Originally Posted by ZenFire
I'd dremel a hole in the mobo tray as near as poss to where the sata ports are on the mobo (or possibly even under the mobo if they will fold back underneath it )
then another hole in side of the drive cage support ( on same side as back of mobo tray) - cables will then come out from underneath the drives to the ports
i would sleeve/bundle the visible portions of the cables as well
hope this helps
Steve
Yup - wise has gone from -15 to zero to hero in just a few weeksQuote:
Originally Posted by usblades
and strangely enough ( and i aint just saying this ) i usually to keep an eye on blades scores - shame they lost warnock and jagielka tho
Warnock for England i say - him or harry redknapp
prep the hdd's inside thier cage then place it in the case. place the sata cable in from the side holes (which is alreadry existing, i did not make a hole there anymore, except its a little bit tricky)on the back portion to connect to the hhds and the other end out the holes underneath the motherboard(should you make one)... choose a good placement for the holes that is best for your board... sorry, will try to post pics as soon as photobucket is ok...Quote:
my suggestion is
I'd dremel a hole in the mobo tray as near as poss to where the sata ports are on the mobo (or possibly even under the mobo if they will fold back underneath it )
then another hole in side of the drive cage support ( on same side as back of mobo tray) - cables will then come out from underneath the drives to the ports
i would sleeve/bundle the visible portions of the cables as well
hope this helps
Steve
goodluck
First attempt doing this... could of turned out better with a little more planning, but it is an improvement to what it was :/
old:
http://www.ackz.net/sars/oldwire.JPG
new:
http://www.ackz.net/sars/newwire.JPG
those are nice, but too huge, can you please resize them... thank you
oops sorry, fixed size '.'b
Take the unused wires and shove them out the hole between the PSU and the back wall..
Skeelz - i'd also run your cpu power cable up the back of mobo tray and make a hole near top of mobo tray near to where cpu power socket is - bring it out there
I've been meaning to post these for a while but I've had to wait on being activated or something. My case:
http://img127.imageshack.us/img127/7680/dsc06776pg5.jpg
http://img294.imageshack.us/img294/1894/dsc06777pk2.jpg
http://img294.imageshack.us/img294/893/dsc06780tq3.jpg
http://img123.imageshack.us/img123/6461/dsc06784wo5.jpg
http://img225.imageshack.us/img225/9366/dsc06778mr3.jpg
That was my actual intent, but alas, the cpu power cable was a bit short :(Quote:
Originally Posted by InfiniteDreamer
I'm thinking if u cut another hole closer to the psu that it might reach, as the cpu cable was about an inch short.
you can buy cpu extension cables - ebayQuote:
Originally Posted by skeelz
you need something like this
http://www.overclockers.co.uk/pimg/CB-022-AK_200.jpg
I Had to buy one of these myself - for the very same reason
ah cool, did not know those existed @.@ thanks for that info Infinite
Got another Computer (Green) but Red and Blue One is still Main Rig..
http://www.msprotege.com/members/Bri...20-%20(10).JPG
http://www.msprotege.com/members/Bri...20-%20(12).JPG
http://www.msprotege.com/members/Bri...20-%20(14).JPG
http://www.msprotege.com/members/Bri...20-%20(15).JPG
http://www.msprotege.com/members/Bri...20-%20(16).JPG
http://www.msprotege.com/members/Bri...20-%20(17).JPG
http://www.msprotege.com/members/Bri...20-%20(18).JPG
http://www.msprotege.com/members/Bri...20-%20(19).JPG
http://www.msprotege.com/members/Bri...20-%20(20).JPG
http://www.msprotege.com/members/Bri...20-%20(21).JPG
http://www.msprotege.com/members/Bri...20-%20(23).JPG
http://www.msprotege.com/members/Bri...20-%20(24).JPG
http://www.msprotege.com/members/Bri...20-%20(11).JPG
http://www.msprotege.com/members/Bri...20-%20(13).JPG
nice pictures, now can we see the whole thing? in one picture perhaps?
^ It looks like all the other 900's, Except, three fans in the front..
Any imput on mine?Quote:
Originally Posted by Tylervalo
B-E-A-Utiful :)Quote:
Originally Posted by Tylervalo
Love it, it almost makes be buy a 900 :)
Best Regards :toast:
Well I like the ooptical at the bottom. Not sure if the contrasting color is right though. Maybe paint the optical a perfect match or some more interesting contrast like metallic blue.Quote:
Originally Posted by Tylervalo
If you are up to it you could paint the interior. A dark charcoal metallic perhaps.
Is the 24 pin cable long enough to route through the back? If not then maybe an extender (sheathed) so you could just pop it through beside the mobo header and have the rest stealthed?
Thats what I'm wondering all along.Quote:
Originally Posted by CyberDruid
No one here seems to route the 24pin from the back.
If it's too short, you can always use a extender.
Maybe it's too thick ? :confused:
I beg your pardon.Quote:
Originally Posted by smashhell
http://www.xtremesystems.org/forums/...2&postcount=68