This is the max. FSB, if i set it higher bluescreen :(
i use Bios R1.03, Timings 4-4-4-8, VCore 1.5v, CPU Stepping QHJJ, Water Cooling (max. 30°C)
http://people.freenet.de/chris070719.../SuperPi-1.jpg
Printable View
This is the max. FSB, if i set it higher bluescreen :(
i use Bios R1.03, Timings 4-4-4-8, VCore 1.5v, CPU Stepping QHJJ, Water Cooling (max. 30°C)
http://people.freenet.de/chris070719.../SuperPi-1.jpg
another victim.... :( bad
yup.we want to know what's wrong with those es chip? or maybe the mobo?
stuck fsb made me crazy.....God
cooling by tower120.
my qhjj stuck@228
qkhk stuck@234
looks like same as pentium M - we have B1 .. now B1 in these chips
Has anyone posted BIOS shots of the memory config available on this board? Is there any tool similar to A64 Tweaker that shows full memory timings via Windows?
*Edit just saw FELIX's tweaker, maybe one of the high FSB guys can run that so we can see what if any differences there are ;)
Maybe it's a simple memory/BIOS config causing the problem.
@ Fredyama
What is "graphite sheet" New Beetle is using :)
Somebody should try a retail chip with new revision :)
tried. T2500 retail 0546B121-SL8VPQuote:
Originally Posted by DaWaN
stuck@234 12*234.:(
Well we will know when the next batch hits the states. I will be following these developments closely as this will likely be my next rig and the return to an Intel rig not snice I owned a P1 133MHZ chip:woot:
I praise for aopen that they have to be glad that like 10% doesnt have any problems...
< G H Z
*Edit just saw FELIX's tweaker, maybe one of the high FSB guys can run that so we can see what if any differences there are ;)
Please see Tarosa's SS for FELIX's tweaker setting.
@ Fredyama
What is "graphite sheet" New Beetle is using :)
Please take a look at http://industrial.panasonic.com/www-...YA0000_WW.html
Quote:
Originally Posted by PRTeamJapan
uber thermal tape?? :stick: :D
Interesting, is the graphite between the container & chip?
< G H ZInteresting, is the graphite between the container & chip?
Yep, in lie of thermal grease-- but have to be very carefully using this as core may crack/chip easily, they say.
I 've never used one as I do not own a magic hand:D
would be great on a THIN and LAPPED IHS then :D :slobber:Quote:
Originally Posted by PRTeamJapan
Sure you do ;)Quote:
Originally Posted by PRTeamJapan
So is the function to raise die temps under DI/LN2?
< G H Z
So is the function to raise die temps under DI/LN2?[/QUOTE]
I do not think so from its heat dissipation property-- they use it to fit Pot/Core as tight as possible to nearly the core breaking point so one needs a magic hand:D
beta bios... no gain
http://img.photobucket.com/albums/v336/wappie/bios.jpg
By Tarosa
LN2 Cooling:
modPI 1.5 XS 1M: 16.750s @3640.7MHz (280.1MHz x 13)
http://www.geocities.jp/gbxfs134/i97...3/pi1M/280.JPG
modPI 1.5 XS 32M: 15m33.110s @3601.4MHz (277.0MHz x 13)
http://www.geocities.jp/gbxfs134/i97...i32M/27732.JPG
wow. wow. wow. wow. wow.
i like to see soem 01 on thate speed :D
I would like to see ANY 3dmark with that speed.. The power is there, rock the ORB! :toast:Quote:
Originally Posted by blind_ripper
:o.
For any 3dmark, please ask hipro5......;)
i just fell from my chair.. me and hicookie are working HOURS... really HOURS.. and then some sick screen come's by :D great work tarosa.
He got the board? :DQuote:
Originally Posted by PRTeamJapan
I am pretty sure he will soon get it;)Quote:
Originally Posted by R101
21th or 22th, thats the date for the European stores... (20th, but shipped @ received by 21-22th)Quote:
Originally Posted by PRTeamJapan
I'm annoyed, and I don't even have the board yet!
What is Tarosa doing differently than everyone else? It's kinda crazy that almost everyone can't break 240fsb, but he is just pumping away at it!?
Quote:
Originally Posted by Waus-mod
You've got no gain propably coz it was writen on 4/4/1906 ......:D
haha, i have not notice that! .......funny!
haha :D
rofl nice seen that one :toast:
Awesome stuff Team Japan, boards arriving in the US now so we can give you some competition.
IF youre fsb lets you ;)
@ hipro,
Yes im gone in time :P
Holy motha.... :slobber: :slobber: :slobber: :slobber:Quote:
Originally Posted by PRTeamJapan
I did some hexus pi ... still nice. but it loves low latency's
http://img.photobucket.com/albums/v3...pie/pifast.jpg
that fsb limitation is getting bored.
hopefully you can get over it and continue the good work
:eek: i know what you mean........... ~5minutes faster than our opterons at same clocks :clap:Quote:
Originally Posted by bachus_anonym
Omigod:eek: :eek: What a speed:toast: :toast:Quote:
Originally Posted by PRTeamJapan
My board will be here by weekend and hope it will be speedy with a lot of cold:)
Awesome SP runs there :toast:
:slapass: :DQuote:
Originally Posted by ocwear
Well yeah, no Yonah Easter oc'ing action for us this year.Quote:
Originally Posted by kiwi
a few board's where avalible in germany, one is on the way to holland.....:D
i hope he can make it before the weekend......
By KUBOKUBO
(Set up)
CPU: Intel Core Duo T2600 (2.16G) QKHK ES
M/B: AOpen i975Xa-YDG (Rev.00A) (BIOS： R1.02)
MEMORY: Corsair PC2-5400UL V1.5 512MB x2
VGA: GALAXY GeFORCE 7900GT 256MB (PCI-E)
VGA Heatsink: ZAWARD ZAV02-NV5 Rev.3
HDD: HITACHI HDS722580VLAT20 (80GB, 7200rpm, 2MB)
CPU Cooling: Dry Ice + Methylated Sprit/ KuriPro4 + V-TEC ARC Bed Rev.3.31
NorthBridge Heatsink: Stock
Grease:Graphite sheet + Silver Grease
PSU: Zippy 600GE (600W)
OS: Windows Server 2003
http://kubokubo.jp/cpu/coreduo_t2600...484_268x13.gif
Whoa :eek:Quote:
Originally Posted by PRTeamJapan
It seems that more and more Aopens from Japan are getting infected with the "no limit of fsb" virus :D
I see people posting that there boards are on the way.... guys please keep in mind that many, many , many boards will have the problem. So if you get the board you dont expect it runs hard. if it does youre lucky. or else you will be very sad.
Or "buy until you get a good one" virus.. :DQuote:
Originally Posted by mrlobber
Now, I, and my friends, included KUBOKUBO of course, think that FSB limitation isQuote:
Originally Posted by Waus-mod
mainly owe to the CPU, not to the motherboard.
KUBOKUBO has changed his CPU from stepping:4 ES to stepping:8 ES.
His 1st CPU, stepping:4 ES was a poor FSB performer...
2nd CPU, stepping:8 ES is very strong...
And he has been using a same motherboard.
Yeah there may be helpful motherboard modification,
It will also push the strong CPUs more...
:( to bad... its not fun anymore to get to know what it would be
Sounds like it's time to dump something and get another that isn't FSB limited.Quote:
Originally Posted by Waus-mod
Isn't that what we do in a normal oc'ing setting? If one cpu doesn't oc, off to ebay it goes and we get another.
kyosen: Do you know what week they began producing stepping 8?Quote:
Originally Posted by kyosen
this is the max with multi 12 :(
I think i bought a T2600 with stepping 8
http://people.freenet.de/chris070719.../SuperPi-4.jpg
Wrong :D See your CPU-Z screenie ;)Quote:
Originally Posted by Chri$ch
Is 253 your max fsb or you meant your maximum cpu frequency?
ups, sry ;)
i meant that i will buy a cpu with stepping 8
~3Ghz is max frequency
yes....Quote:
Originally Posted by kyosen
Same idea here , only exception seems to be hicookie
who only gained liiiiitle, when he changed the cpu from 4 to 8 :-)
his step 8 performd worse ;)
@ crotale.. step 8 is from week 42. (qhkh ES)
@ Chri$ch why arent you running x13?
I think he was trying to show the max fsb, you can change multi with christy cpuid.Quote:
Originally Posted by Waus-mod
even if i go to x7 ;) i still have that !#$! 236fsbQuote:
Originally Posted by wwwww
Same as me, got my motherboard yesterday.Quote:
Originally Posted by kyosen
I test a stepping:4 T2500 ES and a stepping:8 T2600 ES last night.
The T2500 can 1.42v 227x12 pass dual 32m pi and dual sp2004, But hard to go more.
The T2600 can 1.435v 233x13 pass dual 32m pi, 1.485v 240x13 pass dual 32m pi.
Bios is 03/23/2006, All adjust in bios, I do not use remote and software.
Seem this chip 3.1G is maximum stable frequency under air cool,
I will try watercool later :fact:
Btw: I found a shortcoming in this motherboard, If the FSB ove 230, when i save the bios, It can't automatism reset, I must turn off the power , wait a second and turn on it.
Can someone please find the VCCA mod... so i can try?
I thought it definately wasn't VCCA ;)Quote:
Originally Posted by Waus-mod
:D
:DQuote:
Originally Posted by lawrywild
share with us :P
hi guys
i haven't an es chip can i join this competition too?:D
after easter i'll get mobo and cpu probably a step 8:D
but that fsb limitation is very bad :(
not every one has been fsb pentrated by the board or cpuQuote:
Originally Posted by Fabius88
so good luck :D
I have 15XT2600 QKHK Stepping 8. Maybe I need to choose one to test.
:D i'll wait and hope......:p:Quote:
Originally Posted by ibby
Week 07 should be ok then :cool:Quote:
Originally Posted by Waus-mod
Quote:
Originally Posted by crotale
how do i figure out what week is my t2300 processors are ?
lol, its just that when I said to Waus that I thought increasing VCCA would help the wall, he said it wasn't VCCA and was mobo rev ;)Quote:
Originally Posted by ibby
:D :woot:Quote:
Originally Posted by lawrywild
By New Beetle
(Set up)
M/B：AOpen i975Xa-YDG Vmod / BIOS：R1.02
M/B Bed：「V-TEC ARC Bed Rev.3.3」
CPU：Core Duo T2600 / QHJJ ES 7530A497
CPU Cooling：「Kuri Pro２」+ DICE
Chipset Cooling：Normal
Memory：CORSAIR 5400C4 512MB x2 / CL4-3-2-8
VGA：ATI XPERT 98 PCI 8MB
HDD：IBM-DTLA-307030 / U-DMA 5 (ATA100)
PowerSuplly：Zippy-460WS #2 （3.3V Rail Mod）
Vcore：1.65V/ Vddr：2.25V/ Vio：3.44V
OS：Windows Server 2003
Remarks：DICE Cooling / FSB240MHz Boot / Graphite sheet
modPI 1.5 XS 8M: 3m23.219s @3408.3MHz (FSB262.2MHz x 13)
http://premium1.uploadit.org/fredyam...New-Beetle.png
that's sick! qhjj reach 3.4G+
Looks like you must have missed his previos 1M result:DQuote:
Originally Posted by hicookie
http://www.xtremesystems.org/forums/...postcount=1328
shoule i burn my es chip or mobo? now i have really not thing to do.....had the misfortune, worst experience with yonah...:(Quote:
Originally Posted by PRTeamJapan
hold up mateQuote:
Originally Posted by hicookie
not yet.
I have 2 identical ES chips
Not T2600 but T2300.
Next couple days when i recive my mobo, i will test them both.
ofcourse if both stop at same fsb =mobo
if diffrent cpu then indicats cpus :D
man.. Im just sitting behind my setup. and watch the 236.5 fsb stuck. i can only watch and do nothing :( i hate this.
:(Quote:
Originally Posted by Waus-mod
come on EMS, ship ma mobo quicker :D
I really dont know what to do. conroe is alllready incoming @ ES so i think im gonna sell this setup.. i really cant do anything,
What chips the C4 Corsair memory modules have???:DQuote:
Originally Posted by PRTeamJapan
:nono: :slapass:Quote:
Originally Posted by Waus-mod
wait for merom maybe mobo is compatiable with it :D
with VCore Mod :)
http://people.freenet.de/chris070719.../SuperPi-6.jpg
did vcore mod get u more fsb, then stock ?Quote:
Originally Posted by Chri$ch
Still on air? to bad youre memmory is the bottleneck.. you can easily break 18s
watercooling ;)Quote:
Originally Posted by Waus-mod
youre right, the mem is bad :(
Removed HS by CAL930 -->the same chips as UL, too bad they are no longer available though...Quote:
Originally Posted by GoriLLakoS
http://cal930.sakura.ne.jp/cgi-bin/c...0c4v52chip.jpg
ok, thanks, i will try change vcore vr to 50k,Quote:
Originally Posted by Chri$ch
it will gets 1.7V+ ,
did you gain fsb with vcore mod?Quote:
Originally Posted by Chri$ch
Quote:
Originally Posted by PRTeamJapan
I can finf 5400UL for 300€
and C4 for >200...so i thought that C4 may have other chips due to their value....
All the C4 has micron D9?
No more results from members ?
not many people have these mobos yetQuote:
Originally Posted by jmax_oc
Send them to me so as to test them/mod them, and afterwords you'll get it moded for free........;) :DQuote:
Originally Posted by hicookie
No, afaik C4 Rev5.2-- could not find such a rev in the UK, might be only available in Japan at the end of last year/beg this year?Quote:
Originally Posted by GoriLLakoS
^^ Now that is a oppertunity to wait for... Hipro modded and maybe one or two WR holder board to show off, for people like me.... :D anyways cant get it (soon) as Cash transfer may take time.
if i can buy another moboQuote:
Originally Posted by hipro5
ill send it to you :D
By Tarosa
A bit improved 1M time.
(Set up)
M/B: AOpen i975Xa-YDG
CPU: T2600 QKHK 7542A840
CPU Cooling: LN2
Memory: DDR2 PC2-8000 Ballistix 240-pin DIMM Crucial 512MB x2
VGA: KUROTO SHIKOU FX5200 PCI 128MB
HDD: NEC DTLA-307020
Power Supply: Zippy-500W the Gaming Edition 3.3VRail Mod → 3.55V
Vcore: 1.62V, Vdimm: 2.45V, Vnb: 1.75V
OS: Windows Server 2003
MEM: 4-2-3-4 3:5
modPI 1.5 XS 1M: 16.734s @3630.0MHz (279.2 x 13)
http://www.geocities.jp/gbxfs134/i97...060414/279.JPG
You still in London Fred? :DQuote:
Originally Posted by PRTeamJapan
i need better mem :stick:
http://people.freenet.de/chris070719.../SuperPi-8.jpg
Chri$ch did you gained fsb @ more vcore?
great stuff for watercooling!Quote:
Originally Posted by Chri$ch