My score with my signature machine....
Printable View
My score with my signature machine....
hi, yes now you've got the world record :toast:Quote:
Originally posted by Tom Holck
Hi Cpulloverclock,
now I have finaly done 24 sek i M1 as you can see in the SuperPi sektion.:banana:
What is the CPUmark record now?
Just done this:
3402 Mhz
congratulations
432 CPUmarks... wow... and I think this result is pretty good...
http://home.no.net/endreke/bilder/PC/CPUMark_274.JPG
Hehe... could have got more with 246 or 247x11.5 though, but when I had modded the board I couldn't get that CPU speed (warm weather... air cooling sucks).
Anyways... great benching Tom. :toast:
:)
zyx,
what mobo, bios and mem timings you running?
shuttle an50r bios for this fast pi 00 and timings is 3-2-2-10
Quote:
Originally posted by SAE
Update :D
Excellent done… 45.53 is just amazing with Barton/Prometiea :)
Thanks :DQuote:
Originally posted by umekami10
Excellent done… 45.53 is just amazing with Barton/Prometiea :)
Clocked the fsb like hell :D
FSB gains more than cpu, best is to up them together ;)
:D ;)Quote:
Originally posted by SAE
Hehe. Did not wanna make you sad ;) I like you Fewture and we have very similar systems... :thumbsup:
I can go higher too :D
But it's not always stable, cr*p DFI LP :rolleyes:
Ok...I have a 2600+ M coming soon and if I have time tomorrow I will get a new Infinity (saved up change :p:) . I have to go to the shop and pick it up, so gotta find some time. If I let them send it it will take ages (weeks).
If I don't kick yer a** then I will go to DaBit's and shove his cascade on it :mad: LOL :D
Happy tweakin' m8! :toast:
That's unfair... same conditions pal :DQuote:
Originally posted by Fewture
:D ;)
Ok...I have a 2600+ M coming soon and if I have time tomorrow I will get a new Infinity (saved up change :p:) . I have to go to the shop and pick it up, so gotta find some time. If I let them send it it will take ages (weeks).
If I don't kick yer a** then I will go to DaBit's and shove his cascade on it :mad: LOL :D
Happy tweakin' m8! :toast:
Try to beat me with tweaking since my LP B is dead (accident :rolleyes: ) and I only have a crappy infinity here ;)
Well..you have a GT and I have a M1 507.. dunno about that.. We'll see.. Probably pick a board up tomorrow morning. Dunno when I'll get the 2600's. Hope next week. In the meantime I putt my 3GHz mobile in it, but I doubt that will be fast enough.. On the other hand..my other Mobile didn't go as fast in my NF7.. Got 2850 out of it with 2.2V and it did 2960 with 2.12 in the DFI. So maybe my 3Ghz chip will go a bit faster on the DFI :D Time will tell..Quote:
Originally posted by SAE
That's unfair... same conditions pal :D
Try to beat me with tweaking since my LP B is dead (accident :rolleyes: ) and I only have a crappy infinity here ;)
I have to fight with a lame infinity :(Quote:
Originally posted by Fewture
Well..you have a GT and I have a M1 507.. dunno about that.. We'll see.. Probably pick a board up tomorrow morning. Dunno when I'll get the 2600's. Hope next week. In the meantime I putt my 3GHz mobile in it, but I doubt that will be fast enough.. On the other hand..my other Mobile didn't go as fast in my NF7.. Got 2850 out of it with 2.2V and it did 2960 with 2.12 in the DFI. So maybe my 3Ghz chip will go a bit faster on the DFI :D Time will tell..
Chances are good :thumbsup:
Start : Fri Jun 04 21:18:48 2004
End : Fri Jun 04 21:20:00 2004
Duration : 71.67 seconds
================================================== ==========
Total computation time : 71.67 seconds (~ 0.02 hours)
================================================== ==========
Intel Celeron 2GHz @ 3.2GHz (FSB160)
2x256 MB Infineon 6A @ 200MHz CL2-2-2-5
Asus P4C800 Rev.2
HARDiNFO Power :O
( www.hardinfo.dk / www.hardinfo.com )
http://www.tweak.dk/forum/attachment...ntid=1514&sid=
Not fast, but a little faster than my last one ;)
Nice Jacob,Quote:
:toast:
what corevolt?
Max at the SK8N - Can´t remember how much exactly..But around 1.7-1.8. maybe
Here's a new one of mine...Still testing.......
Pentium4 3.4GHz EE....AT 1:1 CPU:RAM....
hipro :toast: :toast: :toast: :toast:
Way to go zyx...... :D :toast:
very impressive both of ya :D :)
Thank you bias_hjorth :D :toast:
Well, my new cpu is up to it I think.. there's still some room to go up.Quote:
Originally posted by SAE
I have to fight with a lame infinity :(
Chances are good :thumbsup:
http://www.fewture.cistron.nl/147_31192.09Vsmall.JPG
Tomorrow I maybe have a board that can pull some nice fsb's. Got some better mem too. Shooting again for #1 prom/XP @ pifast. ;)
Edit:
Oh..cpu is a 2600+ M 0351 MPMW. Tested 3 of them..all 3Ghz prime stable :eek:
Mhm... PiFast really likes high FSB, more than Super PI.Quote:
Originally posted by SAE
Thanks :D
Clocked the fsb like hell :D
FSB gains more than cpu, best is to up them together ;)
Got a new NF7. My... um... fourth. Does at least 238 for PiFast completely stock. I'm hoping it will do 250 with mods. But I doubt it's the 255+ wonder board I was hoping for. :D
Good luck with the boards, both of ya :thumbsup:
Mine is crappola again... :rolleyes:
ahh clash of the titans :D
looking sweet fewture.. I´ll bet you´ll have it by the end of the day :-)
Can't wait to get that prommy... but it may take a little while. I doubt I'll have a chance against you SAE and Fewture but at least I can try to be the 2nd fastest with NF7 (behind umakemi). If the the board will will do decent FSB speed, that is (245+).
Lets hope so.. SAE is picking up some nasty clocks lately :eek: Would be nice to beat him. Give the bugger some work to do ;) heheQuote:
Originally posted by bias_hjorth
ahh clash of the titans :D
looking sweet fewture.. I´ll bet you´ll have it by the end of the day :-)
best so far on retail cooling async
http://www.mechwarrior.tv/pictures/SS/260x10pifast.jpg
Yesterday i changed my Celeron 2GHz @ 3.3GHz with a Pentium4 3.0GHz (NW)
Here my new score, the CPU is able to run faster but my cooler is too bad for it. Also my memory is too bad, this crapy Infineon 6A only do 220MHz 1:1 so i must use the 5:4...
35s At most
2.4G A64+K8T800 with Micron DDR400@DDR480 5-2-2-2.5
UPDATE......
1:1 CPU:RAM with a P4 3.4GHz EE......
damn you´re on a roll :)
I was wondering if you changed to cascade like you mentioned or is it still the good´old prommy?
It's a "hi-pro-mie" ......Moded with R410 gas........NO cascade..........yet...... :DQuote:
Originally posted by bias_hjorth
damn you´re on a roll :)
I was wondering if you changed to cascade like you mentioned or is it still the good´old prommy?
hehe very impressive.. Performance wise how´s the r410 compared to r507 and r404?
I got about 7-9*C in full load colder than the R404........But I've moded more the Promie......Quote:
Originally posted by bias_hjorth
hehe very impressive.. Performance wise how´s the r410 compared to r507 and r404?
Just under 52s. with my Abit NF7-S, Barton 2500+ (non mobile) and HOT WATER..(26ºC)
Need some DI or LN2 :stick:
http://muljas2.mine.nu/dani/Tietokon...SB%2051.99.gif
A few tweaks, a few more MHz and a new score :D
http://users.tpg.com.au/spark69/an50r/pifast40.63.jpg
SUPER PI
35S MY MACHINE IS GOOD?
Wrong thread :D ;)Quote:
Originally posted by .OverclockMan.
SUPER PI
35S MY MACHINE IS GOOD?
Very nice score :toast:Quote:
Originally posted by CodeRed
A few tweaks, a few more MHz and a new score :D
http://users.tpg.com.au/spark69/an50r/pifast40.63.jpg
Update, new CPU new score!!
XP-M 2400+
NF7-S v2.0
http://www.hpautoelectrics.com/OverC...5%20pifast.jpg
Still testing!!
thanks man, I am still a bit short of my 40 sec goal with this chip. Need to find another 50 Mhz from somewhere :)Quote:
Originally posted by shidokanjohn
Very nice score :toast:
The difference 32 bit OS kontra 64 bit OS is about 40 mhz at your speed.Quote:
Originally posted by CodeRed
thanks man, I am still a bit short of my 40 sec goal with this chip. Need to find another 50 Mhz from somewhere :)
That meens if you was going 64 bit the time will be as if you was going 40 mhz faster in 32 bit.
I found 2003 64 bit a tad faster than XP 64 bit;)
Ive tried Win2003 server (32 bit version) and got the same result. I must be doing something wrong with my OS tweaks, tried every common trick :(Quote:
Originally posted by Tom Holck
The difference 32 bit OS kontra 64 bit OS is about 40 mhz at your speed.
That meens if you was going 64 bit the time will be as if you was going 40 mhz faster in 32 bit.
I found 2003 64 bit a tad faster than XP 64 bit;)
I'll give the 64 bit 2003 a try next week.
AthlonXP 1700+ (DLT3C) @ 2.42GHz (FSB220)
Abit NF7 Rev1.2
2x256 MB Samsung PC3200 @ 220MHz CL2.5-3-3-11
WinXP Pro SP1
Heres mine:
I need volt mods :(
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg
49.86sec/NF7/BH5/XPM
Wow, congrats :thumbsup:Quote:
Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg
49.86sec/NF7/BH5/XPM
Nice one :)
Very nice. :toast:Quote:
Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg
49.86sec/NF7/BH5/XPM
I could've had that WR... well, atleast for a while. :)
BTW, whats your Super PI, 35 or 34s?
Did you have to do the L12 mod to get that FSB?Quote:
Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg
49.86sec/NF7/BH5/XPM
And if you did, what was your highest FSB before the mod?
Have not tried superpi 1M. Did 2M and it was 1m21s.
Yes I did the L12 mod, otherwise it was no go above 240 FSB.
But I'm into DFI benching now and I'm sure I can do better ;)
HaLDoL,Quote:
Originally posted by HaLDoL
World record for an AMD XP on aircooling:
http://kaine.studentenweb.org/pifast49.86.jpg
49.86sec/NF7/BH5/XPM
I hate you (j/k) :D
it took me 7 CPUs and an R404a mod to my prommy to break 50 sec with the XPs and you go and do it on AIR !!!!!
excellent job :toast:
Hey guys, do you mind telling me what the tweaks are for WinXP and Win2K, if there’s any!!
Thanks.
WELL DONE on AIR...........Air counts first........ ;) :toast:
Here's my best so far with my 3200+ and K8Npro on water. Still can't get down to this score with my K8NSpro:rolleyes: Off by a half second.
No vmodds / stock mach 1 / in a closed case
http://24.158.154.102/images/42.42pifast.jpg
impressive that stock mach I is able to oc the processor that high :)
:DQuote:
Originally posted by bias_hjorth
impressive that stock mach I is able to oc the processor that high :)
http://24.158.154.102/images/42.30pifast.jpg
ok, thats all i got, 1 more fsb was like pulling teeth :p:
Just playing with some new hardware...
http://www.myfavoritehacker.com/some...ast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/some...258MHz-FSB.png
:lol:Quote:
Originally posted by Jeff
Just playing with some new hardware...
http://www.myfavoritehacker.com/some...ast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/some...258MHz-FSB.png
Jeff, did you give up these un-nerving AXPs??? :D
BTW, looking good :thumbsup:
You can say that. I'm still using them in the farm but my "fun" rig is staying A64 from here on out. :)
Nice one :toast:Quote:
Originally posted by Jeff
Just playing with some new hardware...
http://www.myfavoritehacker.com/some...ast-44.72b.png
(A64 3200+ NewCastle, Corsair XMS3500, Epox 8KDA3J, and an R507'd Mach1)
http://www.myfavoritehacker.com/some...258MHz-FSB.png
You beat me by 0.06s :( ;)
New record :D
My Score. Is it ok?
http://www.forumdeluxx.de/gallery/data/500/8886cmd.JPG
Wow, that's sick man :slobber:Quote:
Originally posted by SAE
New record :D
Can you squeeze more out of it ??
Maybe, with timings... maybe lower fsb and higher clocks? Dunno... maybe 0.1s! :DQuote:
Originally posted by YoupY
Wow, that's sick man :slobber:
Can you squeeze more out of it ??
That's very nice SAE. :up:
man thats nice :toast: :toast:Quote:
Originally posted by SAE
New record :D
you're putting a lot of A64 owners to shame there :)
congrats, nice... for sureQuote:
Originally posted by SAE
New record :D
Thx to all of ya, pals :D
It's quite a bit of work to further improve that ;) (I decreased my former phasechange record time by nearly 1second)
I resemble that remark. ;) I had a 44.52 but it had the dreaded ***ERROR***.Quote:
Originally posted by CodeRed
you're putting a lot of A64 owners to shame there :)
Man... the more I look at your time SAE the more in awe I am. Really nice work! :toast:
Hehe. I know that ***Error*** too well ;)
I did not have it today, but sometimes when vcore was too low, or something like that. I also can do 12x270 (I was stunned seeing that), but it would never complete or throw that error :(
Here is my new high score no vmodds in a closed case stock mach1 promme. :D i believe its #14 overall
http://24.158.154.102/images/41.97.jpg
EPoX 8KDAJ fully modded / Stock Mach 1 / 1.68v-1.7v
http://www.xs4all.nl/~famchow/A64_34...st_2.84GHz.PNG
playing further ... :cool:
Kicked your ass ...
Let's see your reply to this...
http://members.home.nl/youpy/a64prom7_small.jpg
I need some EB's though :| to go harder, mem doesn't coorperate very well.
yes indeed you did it, good job :toast:
very nice.. was that a 2k3 run?Quote:
Originally posted by SAE
Hehe. I know that ***Error*** too well ;)
I did not have it today, but sometimes when vcore was too low, or something like that. I also can do 12x270 (I was stunned seeing that), but it would never complete or throw that error :(
No (win2k), and the DFI is sooooo finicky, it sometimes runs this high, and another try results in a lockup :(Quote:
Originally posted by bias_hjorth
very nice.. was that a 2k3 run?
But 12x268 runs fine :D
hehe I think we can both agree on that.. G8 job buddy :toast:
Thx :D
Anywhere in these clocks are the limits of the AXP platform... :(
Score update :D
http://members.home.nl/youpy/a64prom9.jpg
Vcore @ 1.85
Vddr @ 3.1V
Still want to go faster
Today i queeze some more out of my XP :)
Here ya go....
i already have tread posted with the results: http://www.xtremesystems.org/forums/...threadid=39307
Stock mach I / full modded EpoX
http://www.xs4all.nl/~famchow/A64_34...st_2.98GHz.PNG
soo close to the 3GHz :D
Netjes Kakaroto ;)
Any way you can reach the magic marker of 3 ghz? ;)
Some nice dutch luvin' here! :D Great work guys ;)
Thanx Few
Couldn't resist the temptation, and the fact I still had another dutchy with a faster score than me :
http://members.home.nl/youpy/a64prom11.jpg
8th place on ministry is mine :D
Waiting for Kakaroto's reply........
Try to run it one more time 2996MHz. Then i should hit the 42.1x.
Tried 290x10, but my BH-5 maxed out to 288MHz 2-2-2-5 @3.8v. The board maybe holding back my mem, but im not sure.
I do 280Mhz @3.4v...:confused:
Next week think i will refill my Mach1 with R507. Then 3GHz has to be easy to hit. I like your -40C idle :D
Well done all esp SAE ;)
Just posting to say i'm still around just finished updating the tables its upto date as of 2 mins ago.
Just so people are aware daily / weekly updates went out the
window as i needed to spend less time on PC stuff and more
time on RL stuff.
But I'm still commited to updating, but it may be a month apart
between updates i'll never let it span more than month though.
I'm in the need to revise how the system work's as the file size
is over 600K now and on dialup thats an issue for me so thats
another reason for doing less frequent updates.
anyway keep up the good work folks :)
Thx, that's gr8, pal :)Quote:
Originally posted by PMM
Well done all esp SAE ;)
Just posting to say i'm still around just finished updating the tables its upto date as of 2 mins ago.
Just so people are aware daily / weekly updates went out the
window as i needed to spend less time on PC stuff and more
time on RL stuff.
But I'm still commited to updating, but it may be a month apart
between updates i'll never let it span more than month though.
I'm in the need to revise how the system work's as the file size
is over 600K now and on dialup thats an issue for me so thats
another reason for doing less frequent updates.
anyway keep up the good work folks :)
I see there now are two more a64 in front of me ;) Rank 29 for only an outdated XP ain't that bad ;)
Been a while since I've last put a score up here but hey, why not?
Got a new A64 3500+, Asus A8V and gig of HyperX PC4000....
Voltage mods are in order of course but I just got the board today. Aircooled btw w/ Zalman chunk of copper on it.
First up... as I didn't really know how to decipher the mem settings.. as there seems to be ALOT more than what I'm used to, I haven't changed anything but cas to 2.5.... And w/ that change and leaving the rest the same.. voltage @ 2.8v I got 263mhz.
http://www.maximumoc.com/img/hardwar...xus_pifast.jpg
And this score was a smidget faster.. my fastest I've hit thus far aircooled.
http://www.maximumoc.com/img/hardwar...xus_pifast.jpg
It really seems that the A64 loves more mhz rather than FSB. At least on this particular bench. When I have more time tomorrow I will be sure to run 3dmark and other benches. I also have a 6800 128mb (until the ultra comes out) to hold me over.
Also if interested...
3500+ ADA 3500DEP4AW
CBAVC 0420RPMW
Malaysia
A8V -- Rev 1.02, 0418CD
FX-53 939 running 11 x 265 :)
http://www.overclocking.dk/img/users/23219_09.jpg
Well GomerPyle, it's not faster than SK8V at the same CPU speed:rolleyes:Quote:
Originally posted by GomerPyle
FX-53 939 running 11 x 265 :)
http://www.overclocking.dk/img/users/23219_09.jpg
whats your timings at 265?
Tom the timings are 2-2-2-6. Will try for 268-269 x 11 soon I hope.
ok, if this is the same version of pifast that we use over at www.ministryofoverclocking.net then my best so far is 72.00 seconds :) thats on my XP2400+ with 256mb of ram, haveing problems geting a stable enough overclock to run at any decent overclock atm, think its due to my 5V rail being at 4.7V, hopefully that time will improve soon though :)
owen
Well not bad:toast:Quote:
Originally posted by GomerPyle
Tom the timings are 2-2-2-6. Will try for 268-269 x 11 soon I hope.
One day I think You must come to my place with that mob,
We will put it unter the Cascade -120c and do x13 :banana:
Btw I have another cascade at -112c for the ATI with a standard Prommy heat, just to mount on it..
:D
Can I have a cascade or do I have one build myself? :D
Sure I can come visit you some day.....could get quite interesting with some good cooling.
Nice :)
DFI Infinity + XP-M 2600+ @ DI
My 1st DI run im going to run in again soon with ethanol or acetone instead of denaturalised alcohol (ethanol should give much better temps than the dena alcohol).
The second problem i had was that the board had problems on mp 12/12,5 the cpu didnt get above 3050 on those multis (sill don’t know what the problem was).
http://home.kabelfoon.nl/~vnrswk/4643.jpg