** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Hi radaja
where did u bougth those cellshock pc8000 modules? I have a friend that is going to states next month and he told me he could buy some ram for me :D:D:D
he usually buys from amazon, zipzoomfly, newegg.
could u point me some cellshock,gskill,crucial,team group kits that are known to have micron d9 chips?(links please)
also I bougth the mushkin redline KIT 2Gb DDR2-1000 Mushkin 996525 4-5-4-11 ram and they are D9GKX but I can't get 1200 5-5-5-15 out of them stable :(
tried vdimm up 2.45, vmch 1.42 but prime 95 fails in the first 2-5 minutes (they were under thermalright hr-07 memory radiators at that voltagee)
is it posible that i got a bad binned kit?

Quote:

---

Originally Posted by kagula323

Hi radaja
where did u bougth those cellshock pc8000 modules? I have a friend that is going to states next month and he told me he could buy some ram for me :D:D:D
he usually buys from amazon, zipzoomfly, newegg.
could u point me some cellshock,gskill,crucial,team group kits that are known to have micron d9 chips?(links please)
also I bougth the mushkin redline KIT 2Gb DDR2-1000 Mushkin 996525 4-5-4-11 ram and they are D9GKX but I can't get 1200 5-5-5-15 out of them stable :(
tried vdimm up 2.45, vmch 1.42 but prime 95 fails in the first 2-5 minutes (they were under thermalright hr-07 memory radiators at that voltagee)
is it posible that i got a bad binned kit?

---

i got my latest cellshock kit from a member here at XS.my first kit i got from memoryc.com and my second kit i got from another member here at XS.
i think you will have to find someone selling them,because i have not seen anywhere(online stores) thats still has them for sell:(
but just keep looking in the for sale sections at various sites,and you might just get lucky and find a kit:D
about the muskin's can you get them stable using pl9 ddr1200?
EDIT- your in luck! i found a kit of cellshock pc8000's cl4 at memoryc.:D grab them fast
http://www.memoryc.com/computermemor...c28000cl4.html

and these teams are good but exspensive
http://www.memoryc.com/computermemor...xtreemkit.html

and these pc6400's
http://www.memoryc.com/products/desc...kit/index.html

Quote:

---

Originally Posted by radaja

about the muskin's can you get them stable using pl9 ddr1200?

---

well not really ... at least yesterday when I had time to test I didn't made it
but right now I'm running them at 1000MHZ with 4-4-4-10 PL9 on 1:1 strap 333 (2.00B) so they must be good chips
I wanna ask if u could save the spd from u'r cellshock with spd tool and send it to me or post it somewhere so I could load it on my mushkin set and see how it works :)

EDIT: they are at 1000mhz @ 4-4-4-10 with 2.16 vdimm set in bios and everest show's 2.13V

Quote:

---

Originally Posted by kagula323

well not really ... at least yesterday when I had time to test I didn't made it
but right now I'm running them at 1000MHZ with 4-4-4-10 PL9 on 1:1 strap 333 (2.00B) so they must be good chips
I wanna ask if u could save the spd from u'r cellshock with spd tool and send it to me or post it somewhere so I could load it on my mushkin set and see how it works :)

EDIT: they are at 1000mhz @ 4-4-4-10 with 2.16 vdimm set in bios and everest show's 2.13V

---

did you notice the cellshocks link i posted?get them fast,only one kit.and i havent seen them there for about four or five months now.
about the spd tool,how does it work?or how do i save the info?
i'll download it now.is this the newest version?and will this one do?
SPDTool_055.zip

from the file menu ... u must select >Read->Module 0 or Module 2
an then File-> Save ... give a name like Cellshock PC8000 and Save :).
all I'll have to do after I receive the file u save is to File->Write-> Module 0 and then Module 2 .... and my RedLine Mushkin's will be recognized as Cellshok's and hope will allow me easier OC on them :).

Edit: Yes ... version 0.55 will do just fine. I have version 0.63.

ok version 055 did not work so i tried 0.63 and i was able to save it.but how do i get it to you or post it?sorry im not good with software stuff
try this,i uploaded it to rapidshare.
http://rapidshare.com/files/23823871..._8000.spd.html

Quote:

---

Originally Posted by radaja

ok version 055 did not work so i tried 0.63 and i was able to save it.but how do i get it to you or post it?sorry im not good with software stuff
try this,i uploaded it to rapidshare.
http://rapidshare.com/files/23823871..._8000.spd.html

---

I've sent u a PM with my email adress :)

Well i didn't managed to use the spd from cellshok ram ... but somehow after trying this ... now the ram works well at 1200 5-5-5-15 PL9 with vdimm 2.32 in bios and 2.27 @ load (everest)
don't really know what happened but now it works :D... gonna try with lower vdimm :P

edit: radaja ... thanks a lot 4 your help :)

well even though the spd thing did not work,i glad you able to do 1200 now.
im glad to help anytime.:D

Took the 8400 out, back at it again with the q9650. Can get 500fsb stable on 3 45nm quads but still have to use 1000/1000/0/50 skew. Props to all you guys that were able to with 800/900/0/0. :up: 1hr Prime blend so far, going to let it run overnight. Was able to do this with my q9550 with less vcore.

Quote:

---

Originally Posted by OC Nub

Took the 8400 out, back at it again with the q9650. Can get 500fsb stable on 3 45nm quads but still have to use 1000/1000/0/50 skew. Props to all you guys that were able to with 800/900/0/0. :up: 1hr Prime blend so far, going to let it run overnight. Was able to do this with my q9550 with less vcore.

---

Nice one.Could you post your bios settings or maybe an ET6 Screen shot so i can see what you needed to run that?

I have flashed my bios back to F9 and i am still struggling to stabilize my ram.

Thanks

Any suggestion on bios for my E8400? Since I'm using LV Blades, I'll want to run 1200+ if possible.

Hey guys just switched from a DFI UT P35-T2R a month ago , was a great board but needed so much voltage to push quads , cant wait to hit it with a e5400 later on for my work pc as right now im using a Pentium 2.8 533 which isnt to bad for a work pc
but anyways Ive had this q9650 running at 4.0 ghz I hadn't did a good 8 hour prime 95 till last weekend and seem to keep getting stuck at 7 hours where I don't get errors but the prime program just crashes , I have dual boot with vista 64 and windows 7 both did exact same thing .... so im figuring im running to lite on my voltages or something with memory settings , you guys are doing great with these board lately , maybe take a look at my setting and set me in the right direction .....:confused:


******Gigabyte EP45 UD3P****** f8

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 9 x ]
Fine CPU Clock Ratio............................[ +0.0 ]
CPU Frequency 4.05GHz...........................[ 4.05ghz 450x9]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 450 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]

******Advanced Clock Control******

CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[ 900mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]

******DRAM Performance Control******

Performance Enhance [Standard]
Extreme Memory Profile (XMP)....................[ Disabled ]
(G) MCH Frequency Latch.........................[ auto ]
System Memory Multipler.........................[ 2.00D ]
Memory Frequency mhz.........................[ 800 900]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 4 ]
tRCD............................................[ 4 ]
tRP.............................................[ 4 ]
tRAS............................................[ 12 ]

******Advanced Timing Control******

tRRD............................................[ 3 Auto ]
tWTR............................................[ 3 Auto ]
tWR.............................................[ 6 Auto ]
tRFC............................................[ 52 Auto ]
tRTP............................................[ 3 Auto ]
Command Rate (cmd)..............................[ 0 Auto ]

******Channel A Timing Settings******

Static tRead Value [ 10] ................[ Auto ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Disa ]

******Channel A Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Channel B Timing Settings******

Static tRead Value [ 10] ................[ Auto ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]

tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ]

Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Disa ]

******Channel B Driving Settings******

Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]

Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled]
CPU Vcore [ 1.25000 ]...................[ 1.393 ]
CPU Termination [ 1.20 ]...................[ 1.34 ]
CPU PLL [ 1.50 ]...................[ 1.500 ]
CPU Reference [ 0.760 ]...................[ Auto ]

MCH Core [1.1 ]...................[ 1.260 ]
MCH Reference [0.760 ]...................[ Auto ]
MCH/DRAM Refernce [0.900 ]...................[ Auto ]
ICH I/O [1.500 ]...................[ 1.570 ]
ICH Core [1.100 ]...................[ Auto ]

DRAM Voltage [1.800 ]...................[ 2.000 ]
DRAM Termination [0.900 ]...................[ Auto ]
Channel A Ref [0.900 ]...................[ Auto ]
Channel B Ref [0.900 ]...................[ Auto ]

******Advanced BIOS Features******

CPU Multithreading..............................[ NA ]
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

Quote:

---

Originally Posted by coop

Interesting for sure. I had a hard time getting mine to boot 1:1, 555. 5:6 was easiest. Changing to 444 made a huge difference. Currently 511x7.5 PL8.
I have been playing with "Extreme" setting. It is quite fast but hard to get fsb very high. Maybe easier w/444. PL9 of "Extreme" is faster than PL8 of "Turbo".

---

I haven't tried "Extreme", have always used "Turbo". So 500fsb is hard with "Xtreme"? Also, to clarify for my own sake..."Extreme" with PL9 is faster than "Turbo" with PL8 ?? Do you have some Everest memory screens you can show? That would be great as I am curious to try "Extreme" mode now! Thanks!!

Quote:

---

Originally Posted by the_real_7

Hey guys just switched from a DFI UT P35-T2R a month ago , was a great board but needed so much voltage to push quads , cant wait to hit it with a e5400 later on for my work pc as right now im using a Pentium 2.8 533 which isnt to bad for a work pc
but anyways Ive had this q9650 running at 4.0 ghz I hadn't did a good 8 hour prime 95 till last weekend and seem to keep getting stuck at 7 hours where I don't get errors but the prime program just crashes , I have dual boot with vista 64 and windows 7 both did exact same thing .... so im figuring im running to lite on my voltages or something with memory settings , you guys are doing great with these board lately , maybe take a look at my setting and set me in the right direction .....:confused:

---

Try this.

Code:

---

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto    ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.05GHz...........................[ 450 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 450      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv  ]
PCI Express Clock Drive.........................[ 900mv  ]
CPU Clock Skew..................................[ 0ps    ]
MCH Clock Skew..................................[ 0ps    ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 400      ]
System Memory Multipler.........................[ 2.00D    ]
Memory Frequency 1066...........................[ 900    ]
DRAM Timing Selectable..........................[ Manual  ]
 
CAS Latency Time................................[ 4      ]
tRCD............................................[ 4      ]
tRP.............................................[ 4      ]
tRAS............................................[ 12      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ 3      ]
tWTR[3].........................................[ 3      ]
tWR[6]..........................................[ 6      ]
tRFC[54]........................................[ 52      ]
tRTP[3].........................................[ 3      ]
Command Rate (cmd)[0]...........................[ 2T      ]
 
******Channel A Timing Settings******   
 
Static tRead Value        [ 8 ] ................[ 9      ]
tRD Phase0 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment    [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)  [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings******
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******   
 
Static tRead Value        [ 8 ] ................[ 9      ]
tRD Phase0 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment    [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)  [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings******
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore        [ 1.15    ]...................[ 1.36875 ]
CPU Termination  [ 1.20    ]...................[ 1.280  ]
CPU PLL          [ 1.50    ]...................[ 1.500  ]
CPU Reference    [ 0.760  ]...................[ 0.835  ]
 
MCH Core          [ 1.100  ]...................[ 1.300  ]
MCH Reference    [ 0.760  ]...................[ 0.850  ]
MCH/DRAM Refernce [ 0.900  ]...................[ 1.000  ]
ICH I/O          [ 1.500  ]...................[ 1.500  ]
ICH Core          [ 1.100  ]...................[ 1.100  ]
 
DRAM Voltage      [ 1.800  ]...................[ 2.000  ]
DRAM Termination  [ 0.900  ]...................[ 1.000  ]
Channel A Ref    [ 0.900  ]...................[ 1.000  ]
Channel B Ref    [ 0.900  ]...................[ 1.000  ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

---

Thanks Hoss331 Im print settings now take home and then hit it with a hard blend in prime hopefully it stops being so damn jittery :)

Ran Prime blend overnight and while I was at work. After 13hrs one core fails, Real Temp opened up on its own and started some sensor test, have had it do that before. I don't get that, will test again with Core Temp and see if it fails again. Should have left Real Temp open for my SS but was so pissed I closed it lol.

Can someone please tell me where i am going wrong.
Here is my Ram blend stable
http://i39.tinypic.com/2zrm9n7.jpg
I know my Cpu is running low but i am just checking for ram stability. The problem is as soon as i try for 450FSB (4.0Ghz) it fails blend on two of the cores almost instantly when running my ram @ the same speed.

What am i missing?
My ram used to run @ 1066 5-5-5-15 with pl of 7 and it was blend and memtest stable on my old DFI X48 LT.

I have tried taking my NB voltage right up to 1.46 with no effect.
Is my CPU the problem?
I have also tested with only two stick with the same effect.
If you need more info please tell me what you need.
Thanks for your time.

Quote:

---

Originally Posted by 18 is # 1

Any suggestion on bios for my E8400? Since I'm using LV Blades, I'll want to run 1200+ if possible.

---

It´s rather easy to flash a bios nowadays so if you have F4 it´s a good start but if it doesn´t like your Blades you can go for F9.

I hope you gonna like your UD3P, it can be a bit trick at first until you find the right CPU/MCH GTL ref setup but after that it´s straight forward.

jonathankru: Post a template of all your settings. Try Pl8 not 7 with the 333 240b, or pl9 with the 400 200d, that's the problem I would guess

I have tried pl all the way up to 12 with no luck.
I only had it @ 8 to see if it was stable at lower FSB with low NB voltage.
Would to higher pl be a problem?

Code:

---

******Motherboard Intelligent Tweaker (M.I.T.)******
 
Robust Graphics Booster.........................[ Auto    ]
CPU Clock Ratio.................................[ 9        ]
Fine CPU Clock Ratio............................[ + 0.0    ]
CPU Frequency 4.05GHz...........................[ 450 x 9.0]
 
******Clock Chip Control******
 
CPU Host Clock Control..........................[ Enabled  ]
CPU Host Frequency (Mhz)........................[ 450      ]
PCI Express Frequency (Mhz).....................[ 100      ]
C.I.A 2.........................................[ Disabled ]
 
******Advanced Clock Control******
 
CPU Clock Drive.................................[ 800mv  ] tried up to 1000
PCI Express Clock Drive.........................[ 900mv  ] tried up to 1000
CPU Clock Skew..................................[ 0ps    ]
MCH Clock Skew..................................[ 0ps    ]
 
******DRAM Performance Control******
 
Performance Enhance.............................[ Standard ]
(G) MCH Frequency Latch.........................[ 400      ]
System Memory Multipler.........................[ 2.00B    ]
Memory Frequency 1066...........................[ 900    ]
DRAM Timing Selectable..........................[ Manual  ]
 
CAS Latency Time................................[ 5      ]
tRCD............................................[ 5      ]
tRP.............................................[ 5      ]
tRAS............................................[ 15      ]
 
******Advanced Timing Control******
 
tRRD[3].........................................[ Auto  ]
tWTR[3].........................................[ Auto ]
tWR[6]..........................................[ Auto  ]
tRFC[54]........................................[ 68    ]
tRTP[3].........................................[ Auto  ]
Command Rate (cmd)[0]...........................[ 2T ]
 
******Channel A Timing Settings******   
 
Static tRead Value        [ 8 ] ................[ 9 ]
tRD Phase0 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment    [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)  [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto  ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel A Driving Settings******
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Channel B Timing Settings******   
 
Static tRead Value        [ 8 ] ................[ 9      ]
tRD Phase0 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase1 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase2 Adjustment    [ 0 ] ................[ Auto    ]
tRD Phase3 Adjustment    [ 0 ] ................[ Auto    ]
 
tRD 2rd (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2wr (Differnt Rank)  [ 6 ] ................[ Auto    ]
tWR 2rd (Differnt Rank)  [ 5 ] ................[ Auto    ]
tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto    ]
 
Dimm 1 Clock Skew Control.......................[ Auto    ]
Dimm 2 Clock Skew Control.......................[ Auto    ]
DDR Write Training..............................[ Auto    ]
 
******Channel B Driving Settings******
 
Drive Strength Profile..........................[ 1066    ]
Data Driving Pull Up Level......................[ Auto    ]
cmd Driving Pull Up Level.......................[ Auto    ]
ctrl Driving Pull Up Level......................[ Auto    ]
clk Driving Pull Up Level.......................[ Auto    ]
 
Data Driving Pull Down Level....................[ Auto    ]
cmd Driving Pull Down Level.....................[ Auto    ]
ctrl Driving Pull Down Level....................[ Auto    ]
clk Driving Pull Down Level.....................[ Auto    ]
 
******Motherboard Voltage Control******
 
Load-Line Calibration...........................[ Enabled ]
CPU Vcore        [ 1.3  ]...................[ 1.4125 ]
CPU Termination  [ 1.20    ]...................[ 1.4  ]
CPU PLL          [ 1.50    ]...................[ 1.57  ]
CPU Reference    [ 0.760  ]...................[ 0.835  ]
 
MCH Core          [ 1.100  ]...................[ 1.4  ]
MCH Reference    [ 0.760  ]...................[ 0.93  ]
MCH/DRAM Refernce [ 0.900  ]...................[ 1.150  ]
ICH I/O          [ 1.500  ]...................[ 1.500  ]
ICH Core          [ 1.100  ]...................[ 1.100  ]
 
DRAM Voltage      [ 1.800  ]...................[ 2.1  ]
DRAM Termination  [ 0.900  ]...................[ 1.050 ]
Channel A Ref    [ 0.900  ]...................[ 1.050 ]
Channel B Ref    [ 0.900  ]...................[ 1.050 ]

******Advanced BIOS Features******
 
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]

---

[/QUOTE]

And it will boot and wont freeze on me but prime blend dies instantly.
Thanks

Quote:

---

Originally Posted by OC Nub

jonathankru: Post a template of all your settings. Try Pl8 not 7 with the 333 240b, or pl9 with the 400 200d, that's the problem I would guess

---

Here is prime blend at 333FSB
http://i41.tinypic.com/wmmm9s.jpg

Here is with 450 FSB and 6 multi , 400Starp and 2.0D. the rest of the settings are the same as template that i posted

http://i43.tinypic.com/hw05qh.jpg
I then restarted prime blend and thread #1 failed instantly
I then started prime small FTT`s and it is still going after 10 minutes
Is my Cpu the problem?
I have booted into windows with this cpu @ 515FSB before if that makes any difference.

DRAM Termination [ 0.900 ]...................[ Normal ]
Channel A Ref [ 0.900 ]...................[ Normal ]
Channel B Ref [ 0.900 ]...................[ Normal ]
You should be able to leave these set to normal for 450x9. Also the Drive Strength Profile at 450x9 can be left to auto. I never needed it until I got up higher on the FSB. You are also trying to OC with 8gb of ram from looking at your sig. You may want to start off trying to get 2x2gb stable first to learn the board. There are some guys that did real well with 8gb, you need to look back in the thread a ways to see their template. You also should not need 1.40v vtt or 1.46v MCH for 4.05ghz, but again IDK with 8gb of ram.

Under Advanced Bios Settings, Did you disable all the cpu stuff? I have everything in there disabled.

Quote:

---

Originally Posted by OC Nub

DRAM Termination [ 0.900 ]...................[ Normal ]
Channel A Ref [ 0.900 ]...................[ Normal ]
Channel B Ref [ 0.900 ]...................[ Normal ]
You should be able to leave these set to normal for 450x9. Also the Drive Strength Profile at 450x9 can be left to auto. I never needed it until I got up higher on the FSB. You are also trying to OC with 8gb of ram from looking at your sig. You may want to start off trying to get 2x2gb stable first to learn the board. There are some guys that did real well with 8gb, you need to look back in the thread a ways to see their template. You also should not need 1.40v vtt or 1.46v MCH for 4.05ghz, but again IDK with 8gb of ram.

---

My Cpu loves VTT unfortunately otherwise i have to pour tons of vcore into it to get it to even post @ 4 Ghz. I unfortunately got a Q9650 with a 1.3VID
I will try the settings you suggested and take 4Gigs out.
How do i tell the temp of the NB? Because i changed the standard heatsink for the Thermalright HR05-IFX and my system temp is still the same.

Thanks for all the replies OC Nub , I know i still need to learn what this board likes and dislikes.

Quote:

---

Originally Posted by OC Nub

Under Advanced Bios Settings, Did you disable all the cpu stuff? I have everything in there disabled.

---

Yes all the cpu features are disabled.