Is the MCW30 restrictive ??
Printable View
Is the MCW30 restrictive ??
Doesnt look like it... look at the stream flowing into his res.
About 4%: In my mind it is the best one for the southbridge. TheQuote:
Originally Posted by ANP !!!
cooling plate is very big, like the southbridgechip.
Thanks guys :)
wonderful job :clap:Quote:
Originally Posted by EvilMoe
what about the temps??? ;)
EvilMoe, you should 7v all your fans. It'd be dead silent :)
heres my work.
Todays subject
http://i26.photobucket.com/albums/c1...g/100_0185.jpg
heres my watercooling gear
http://i26.photobucket.com/albums/c1...g/100_0191.jpg
its main components are the swiftech storm rev2, swiftech mcp655 pump, and thermochill pa120.3
heres what came with the storm
http://i26.photobucket.com/albums/c1...g/100_0194.jpg
various mounting devices for pretty much any processor out there these days
a good look at the storms exterior
http://i26.photobucket.com/albums/c1...g/100_0196.jpg
and in a disassembled state
http://i26.photobucket.com/albums/c1...g/100_0201.jpg
very nice job at the factory. just remember, every time someone hand laps a swiftech waterblock, a kitten dies
http://i26.photobucket.com/albums/c1...g/100_0202.jpg
CCBWE, meet CCBBE...
http://i26.photobucket.com/albums/c1...g/100_0212.jpg
CCBBE makes itself at home
http://i26.photobucket.com/albums/c1...g/100_0217.jpg
attaching the waterblock for leak testing (more on that later)
http://i26.photobucket.com/albums/c1...g/100_0218.jpg
decided to put some casters on my case (lian li G70WB)
http://i26.photobucket.com/albums/c1...g/100_0221.jpg
holes for the tubing to the radiator
http://i26.photobucket.com/albums/c1...g/102_1942.jpg
mounted the pump
http://i26.photobucket.com/albums/c1...g/102_1943.jpg
needed a fresh coat of paint on the body of the radiator.
http://i26.photobucket.com/albums/c1...g/102_1944.jpg
the loop is finally laid out
http://i26.photobucket.com/albums/c1...g/102_1945.jpg
the system is filled and leak tested for 20 hours
http://i26.photobucket.com/albums/c1...g/102_1949.jpg
green wire to a black wire = power
http://i26.photobucket.com/albums/c1...g/102_1950.jpg
it flows!
http://i26.photobucket.com/albums/c1...g/102_1951.jpg
if you follow arctic silvers directions, this is how your thermal paste will look if you remove the hsf/waterblock
http://i26.photobucket.com/albums/c1...g/102_1956.jpg
finished product
http://i26.photobucket.com/albums/c1...g/102_1959.jpg
a work of art
http://i26.photobucket.com/albums/c1...g/102_1973.jpg
still need to straighten out some wiring but i didnt do too bad
http://i26.photobucket.com/albums/c1...g/102_1974.jpg
not to bad at all! Looks great.
how are you temps with all that? i have the same stepping 165, wondering if you can hit 3ghz stable.
everytime i see your avatar, i laugh :D
Yummy with the processors... CCBBE and CCBWE...
Got some nice goodies there too.
oh and I forgot this pic:
My cable routing :D
http://i115.photobucket.com/albums/n...m/DSC00614.jpg
the pictures doesnt show :(
Excelent setup BT n Prefection :woot:
Agreed. Nice job Evilmoe!!Quote:
Originally Posted by NickS
Heh.. i might as well show off my girl here too... Those of you that were following the GTX thread saw most of her, but not her sister. :D
Here are my girls next to each other: it was old amd opty
http://i125.photobucket.com/albums/p...a/IMG_0399.jpg
My NAS:
http://i125.photobucket.com/albums/p...a/IMG_0406.jpg
And my main E6600 /w GTX BOW testing:
http://i125.photobucket.com/albums/p...a/IMG_0574.jpg
And then now here she is after all that nasty dye removed. Also GTX removed :[ i miss it tho...
http://i125.photobucket.com/albums/p...a/IMG_0588.jpg
I HATE THIS STUPID SPP!!!
http://i125.photobucket.com/albums/p...a/IMG_0592.jpg
Components:
2 x DDC-2 /w DDC-T01
120.2PA
120.1 GTS
D-tek / apogeeGTX
DD680i
MCW30 /w custom tweek mountings rigged by me :D
EK res.
Just the one radiator on that E6600 system? Also what case is that? More pics!
For that SLI setup, why not make the outlet of the bottom GPU block come out of the top? That would eliminate the need for the 90 degree barb.
@ Naekuh: Superb setups. i Love ur big girl :P.
Also i would do wht Polizei said.
heh i listed my components:Quote:
Originally Posted by mdmbkr
Thermochill PA120.2
BlackICE GTS 120.1
I dont think a single 120.1 could give you these temps:
http://i125.photobucket.com/albums/p.../FinalTemp.jpg
The case is a armor. Im pretty much at its limit now. Im thinking of moving to a UFO dualy for the room, or a horizon. Havent figured it out yet, but i'll have one next month.
Loop order is:
DDC-2 (1) -> PA120.2 -> DD680i -> DDC-2 (2) -> MCW30 -> BIGTS -> GPU1 -> GPU2 -> EK Res.
And why i kept the 90 is because i dont really have to worry about restrictions. 2 x DDC-2 /w petras top is a TONNNNNNNNNNNNNNNNNN of flow.
http://i125.photobucket.com/albums/p...a/IMG_0565.jpg
Thats her when i had the GTX:
http://i125.photobucket.com/albums/p...a/IMG_0569.jpg
My lap job.
http://i125.photobucket.com/albums/p...a/IMG_0395.jpg
Video cards: ATI HDMI = SUX.... Get the 7600GT version.
http://i125.photobucket.com/albums/p...a/IMG_0396.jpg
my old rad collection. Thermochill isnt there, i got it reciently. :] Wish i could take a pic of it, my memory stick burnt out last night, and i dont have a spare. I dont know how the heck it burnt out either. First time its happened to me.
http://i125.photobucket.com/albums/p...a/IMG_0552.jpg
Supercool VRMs anyone? :D
[gasp] you smoke? :nono:
Does this give you bubbles throughout the loop? It looks like once they are created in the res they would be picked up by the pump inlet.Quote:
Originally Posted by EvilMoe
and to aurora's quote:
does it make a splashy wooshy noise?
ahahahaa the ciggys was to represent smooth on my CPU. I guess no one gets it, and only flames me for the pack of ciggies.Quote:
Originally Posted by serialk11r
well my house is set to 68F (20C) but i live in the basement so its like 17c ambient. temps according to core temp 0.94 are core 0 21c core 1 17c at stock settings while idling and 26c and 21c at load. highest ive seen it hit was 40c at load was when i was at 2.9ghz @ 1.5v. idled at 27c. those temps are with the IHS on.Quote:
Originally Posted by aiya
i love office space! :D
i have to tweak my settings because its not completely stable. fails orthos at priority 8 within minutes no matter what voltage i use. but i think either my motherboard, psu or windows is flaking out on me. when i get home, im gonna put a fresh install of XP home (no vista for me till DX10 games lol) on her and see if it helps. if that doesnt work, then the psu is next. all the voltages are pretty low and i think its what caused the cold boot and eventual death of my first sli-dr. stinking Antec NeoHE (Neo Heap of Excrement) 550 psu :slapass:
thanks to everyones comments. it was my first attempt and i think it was successful. definitely reached a new level here :)
:eek: whats wrong with the neoHE 550??Quote:
Originally Posted by bt_medic04
Thats inside my NAS, and i swear its quieter then the old seasonic 450. Actually the entire setup was ment for quiet, so i cant hear it at all really. And its been giving the NAS some pretty stable loads. It folds most of the time unless i need it to play HTPC role.