Retail Q9650 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

01-30-2010, 11:47 PM
CryptiK

Should get that chip on phase or DICE/LN2 asap :)
01-31-2010, 05:25 AM
andressergio

Quote:

Originally Posted by Jor3lBR

Can't wait to see some 3d Sergio!

7oC cooler! Nice head room to play with in the summer :up:

you will see soon mate im testing very low volts now and yesterday booted at 4905 so easy...

will post some results soon :D

Thanks friend :up:
Sergio
01-31-2010, 05:26 AM
andressergio

Quote:

Originally Posted by OC Nub

Congrats on the new chip Sergio.

Thank you my friend :up:
01-31-2010, 05:26 AM
andressergio

Quote:

Originally Posted by CryptiK

Should get that chip on phase or DICE/LN2 asap :)

no need mate i will push 10C AC to the rad ;) for now im just treating him like a lady lol

Thank you my friend :up:
01-31-2010, 06:56 AM
andressergio

X3380

OK here's some test, heat outside is killer over 33C im on AC at 23,9 Ambient Room not pointing to the PC just let the ambient cools to 24C as a reference

X3380@ 4009(422x9,5) at vcore load 1,184 / idle 1,2

http://img96.imageshack.us/img96/511...951125cust.jpg

i got temp diferences as u can see, Realtemp and Coretemp shows more, and Everest HWinfo, Hwmonitor show less, so i dont know who to believe...either way the chip is cooler than my vid 1,1875

Cheers :up:
Sergio
01-31-2010, 07:30 AM
CryptiK

Very nice temps there. Scary start up vcore in easy tune though! 1.50v! That's no way to treat a lady ;)
01-31-2010, 07:38 AM
andressergio

Quote:

Originally Posted by CryptiK

Very nice temps there. Scary start up vcore in easy tune though! 1.50v! That's no way to treat a lady ;)

lmao that was for trying 4905 wich booted lol, easy tune saves that i dont know where

also been testing this

http://img137.imageshack.us/img137/4...pl9bootdes.jpg
01-31-2010, 07:45 AM
CryptiK

Ah ok. Looks like you will be having some fun with it anyway, congrats.
01-31-2010, 08:06 AM
andressergio

Quote:

Originally Posted by CryptiK

Ah ok. Looks like you will be having some fun with it anyway, congrats.

great fun :up:

i managed to drop vcore i love this chip :o) see how programs reports temps in dif way

X3380@ 4009(422x9,5) at vcore load/idle 1,184

http://img215.imageshack.us/img215/5...951125cust.jpg

X3380@ 4057(427x9,5) at vcore load/idle 1,20

http://img64.imageshack.us/img64/360...951138cust.jpg
01-31-2010, 10:45 AM
OC Nub

I'm glad to see you're enjoying the new toy. Looks like the new chip does 4ghz without breaking a sweat, very nice Sergio.
01-31-2010, 11:27 AM
MrDucky

i have exact the same voltages stable with my Q9550 VID 1.1375. but looks promising
01-31-2010, 05:37 PM
andressergio

Quote:

Originally Posted by MrDucky

i have exact the same voltages stable with my Q9550 VID 1.1375. but looks promising

nice mate :up: 1,1375 vid :shocked: this is 1,20

I updated my low volts tests

Cheers :up:
Sergio
02-02-2010, 05:07 AM
the_real_7

Hey Sergio those volts looking good so far in you et6 and cpu - id cant wait to see what that xeon going to do :up:
02-02-2010, 11:19 AM
andressergio

Quote:

Originally Posted by the_real_7

Hey Sergio those volts looking good so far in you et6 and cpu - id cant wait to see what that xeon going to do :up:

Thanks Tony :up:

lol ET6 keeps remembering my first boot at 4817 lol with all volts i used...dont know how to make it read same as im using

Newer version of ET6 are crap...i installed a B09 one but i remember i've used a very good one B08 ish...that i dont have anymore

Cheers :up:
Sergio
02-02-2010, 01:14 PM
Gameman

That's very nice for a first boot mate - didn't know about this thread...
1.40 for vtt is absolutely lovely for 4.8....means the CHIP will last...:D:D
where did you get your's from if I may ask????:shrug::shrug::shrug:

Thanks:up:
02-02-2010, 02:11 PM
andressergio

Quote:

Originally Posted by Gameman

That's very nice for a first boot mate - didn't know about this thread...
1.40 for vtt is absolutely lovely for 4.8....means the CHIP will last...:D:D
where did you get your's from if I may ask????:shrug::shrug::shrug:

Thanks:up:

Thanks mate :up: i started to learn it as its different from my Q9650 so i started at low volts 4000+ and tuning and more tuning, after i have a base and learn it i will pump up :D

well it was a birthday present ;)
02-02-2010, 03:32 PM
OC Nub

Quote:

Originally Posted by andressergio

Thanks Tony :up:

lol ET6 keeps remembering my first boot at 4817 lol with all volts i used...dont know how to make it read same as im using

Newer version of ET6 are crap...i installed a B09 one but i remember i've used a very good one B08 ish...that i dont have anymore

Cheers :up:
Sergio

Agreed, new et6 really SUCKS!! et6 caused my ud6 board to go into the only boot loop it has had, as soon as I moved the slider to up vcore it locked up. :down:
02-02-2010, 04:57 PM
andressergio

Quote:

Originally Posted by OC Nub

Agreed, new et6 really SUCKS!! et6 caused my ud6 board to go into the only boot loop it has had, as soon as I moved the slider to up vcore it locked up. :down:

yes Tom sucks also talked to Jor and told me that newer versions are horrible i went back to the old ones

Cheers
Sergio
02-02-2010, 05:21 PM
andressergio

x3380

been testing and tweaking to learn this new beast amazing chip temps under 50C at 23,8C ambient with tons of heat outside, very hot summer here...

this is 2hs blend and still going to 3hs

http://img132.imageshack.us/img132/4182/capturaix.png

Cheers :up:
Sergio
02-03-2010, 03:53 AM
CryptiK

4GHz come on man wind her up a bit :) You're turning into a grandpa like me lol.
02-03-2010, 05:10 AM
the_real_7

Well after topping out at 4300 stable and figuring out my ram limitations that where actually quite good if i need to push to 4500 .. Im back at 4.0 lowering my vtt and and reference as low as possible to see how low I cant get my vcore , once I hit that I'm go back up 100mhz at a time adjusting vtt and vcore as needed to stable at higher speeds ... here's last night results not the best but not the worst either :)

Intel Q9650 @ 4050 4 4 4 10 1.1 Stable Setup A
http://i84.photobucket.com/albums/k7...ableSetupA.jpg
02-03-2010, 06:39 AM
MrDucky

Quote:

Originally Posted by andressergio

nice mate :up: 1,1375 vid :shocked: this is 1,20

I updated my low volts tests

Cheers :up:
Sergio

if you think thats amazing read this post the last 4 replies or someting

http://www.xtremesystems.org/forums/...203236&page=35
02-03-2010, 06:44 AM
CryptiK

Coretemp sometimes reads the low vid rather than the high vid. You need to have a screen of real temp showing min and max vids ;)
02-03-2010, 07:06 AM
andressergio

Quote:

Originally Posted by MrDucky

if you think thats amazing read this post the last 4 replies or someting

http://www.xtremesystems.org/forums/...203236&page=35

Yes i saw that i have some nice low vids but all nice clockers but high heat, im very happy of this X3380 vid 1,20 its a very nice combo of temps and clocks it boots at 5ghz so easy i cant believe it :D

Cheers :up:
Sergio
02-03-2010, 07:10 AM
andressergio

Quote:

Originally Posted by CryptiK

4GHz come on man wind her up a bit :) You're turning into a grandpa like me lol.

lol be patient my friend in learning how the new beast reacts...you will see some awesome numbers soon ;)

Cheers friend
Sergio

Show 100 post(s) from this thread on one page