Printable View
Of the 0550 upmw's? Where do you see that info...sorry not sure what it means? And I thought I was up on my info:rolleyes:Quote:
Originally Posted by dave_graham
Well, I primed stable @ stock (1.35v measured) @ 2600 - haven't tried higher at stock volts. That's pretty good...
The substrate are the 5th/6th/7th numbers and 8th letter in the 3rd line of the processor
Ah, mine is 434L then ;) How's the queue looking Dave?:fact: :D
How can we interpret/find out the best substrates?
1295596K50022
1349888K50036
1375786L50158
1375786L50371
1375786L50654
1375786L50767
1387678L50048
1387678L50117
1387678L50178
1387678L50496
final results for me (24/7 settings) :
Vcore set to 1.385 in bios, closed case with papst (check rpm ;)) fans and ~22c room temp..
did a sp2k4 run for almost 11h too, but forgot to take a screenie :slapass:
time to order a ss :D
game on ;)
IMO.. Theres not enough results on this to make a determination of which substrate is better yet or IF one is even better then the other.. We know from 'some' results here that the 408\434 seem to be good clockers.. but thats all ive seen from my reading..Quote:
Originally Posted by thebeast
Quote:
Originally Posted by THunDA
Unless its one of mine then its poop :D
hey my 408 was a dud worse than my 0530 dud....
its all hit or miss even in the "golden steppings/batches"
This I'm starting to see...:slapass:
Honestly, I am dissappointed in my chip. Is the 0550UPMW 434L variant and it doesnt want to do 2.6stable unless I up the voltage to 1.35v. By the way, what are stock volts on the DC? Mine auto'd @ 1.31v is that right? I have been hearing different things on what the default voltage is supposed to be. Also, I am looking into dumping my ABO Ultra-D and getting either a new AD0 Ultra-D or used Expert. What do you guys think? Which one would help increase my oc the most?
PS: Today I got to test out my dual-psu theory. The modstream 520 powering the cpu along and everything else on my 600w noisetaker netted me absolutely no stability gains. I am going to look for my max oc and then see if its the same for both psu's separately and then together, I have to for 30 days before I return it lol.
My 165 0551 UPMW at stock is 1.35v. In CPU-Z it always show less. Use A64MaxTCase temp to see. And I don't see you cpu bad, mine refuses 2650 even at 1.6v.. :mad:Quote:
Originally Posted by madgravity34
If that's the reading you are getting in Windows then yes that is the correct default voltage. My 170 UPMW also shows the same voltage in MBM (and other apps) when I set the vcore to auto in the BIOS.Quote:
Originally Posted by madgravity34
For more info on voltages being reported differently between what it should be, what it shows in the BIOS and what it shows in Windows then read this...
http://www.xtremesystems.org/forums/...postcount=2002
:)
got an odd mix...
4 x CCB1E 0550VPMWs
4 x CCBWE 0546XPMWs
1 x CCBWE 0544XPMW
1 x CCBWE 0543TPMW
all 170s...
weird.
dave
I got my chip watercooled 2900mhz with 1,42v is small fft's stable, but this cpu really have a bs mem crtl!
285mhz is the max I can push my ballistix, I tried 7-8/auto as s7e9h3n suggested and it's win memtest error free up to 295mhz with those settings, but 3dmark and prime fails instantly, when the drive strength is anything else than 5 (cpu loves that value and mem hates it).
And no my ballistix isn't dying on me, have tested then with a different cpu.
Does anyone have a clue about what I could do?
is my nf3 board limiting my cpu?
is there a version which supports dualcores except the 1.9 and 1.b?
help pls... thx
I do not have any screen shots yet buy I have a Opty 170: CCBWE 0550 UPMW 434L and I am currently running 100% stable dual SP2004 @2890 MHZ (AIR) TT Big Typhoon w/AS5 1.55v! I am testing 2900MHZ right now (having some trouble but a possibility)I have run 2900mhz OCCT stable and SP2004 for approx 4-6 then CPU 0 craps out buy CPU 1 is SP2004 Stable for over 24 hours @2900mhz. I am trying @ 1.6v now. CPU 0 stable at 4 hours right now.
This is my 24/7 config...
http://img135.imageshack.us/img135/6...rime2855nq.jpg
This 170 0550UPMW ROKS!!! :banana: :banana:
Btw, they work very well with Asus A8N32...I had a Premium and i had prime stable @ 2.8Ghz, now i have 2.85Ghz with exact the same settings :D
_JP_
Why so little volts?
Quote:
Originally Posted by _JP_
How is this 24/7 stable? 9 hours is not 24/7 stable, also I was told that you should have the no affinity unchecked and should be running the large test which stresses the CPU more. I can run @ 3GHZ for 9 hours but I do not consider that stable. If you can run at least 24 hours I would consider that 24/7 stable. Anyway you still have a good clock and I agree that the 0550 UPMW's do ROCK! I currently have mine running 2900MHZ Dual SP2004(large, no affinity unchecked) for at least 24 hours on air.
Is anyone running a 0551 and have results?
heheh you were told wrong......you don't have to check or set affinity at all......just start up two of them and it will be 100% loaded................setting affinity in that program does nothing....if you want to see which core is failing you have to go to Task Manager and set affinity there not in that programQuote:
Originally Posted by INFRNL
so what's stable for you.................30 days prime stable ROFL
He Dave Graham try only the CCB1E0550VPMWs with the Wafercharge1378678L50XXX. And you will through all others away.Quote:
Originally Posted by dave_graham
Best batches are around L50 500. And heres my 0550VPMW
And Pete@X is much better than mines.
http://www.bilder-hosting.de/tbnl/J7OMV.jpg
yeah, those procs went fast...can't talk much more about 'em since i'll prolly get banned...
(notice my trimmed sig again? sheesh...i can't do anything right anymore)
dave
I used to never mess with setting affinity until a couple of guys fussed at me about it not meaning anything if you did not uncheck and set affinity. Right or wrong, I trust you dinos, I'm not messing with it anymore.Quote:
Originally Posted by dinos22
Quote:
Originally Posted by dinos22
dinos22..with prime 95 24.14 I create 2 shortcuts..ala Angrygames at DFI street ..I set affinity to in the prime 95 drop down menu..one for cpu 0 and one cpu 1...I leave task manager alone
http://www.dfi-street.com/forum/show...nstances+prime
is this not correct????
i just do both affinities in prime app as well as task manager.. :)Quote:
Originally Posted by nealh