Priming for one hour is nothing. Remember, you test for stability to BE SAFE. First test prime to make sure it's stable, then after that run games. So run prime or stress prime for at least 8hrs, first small ffts, the larke ffts.
Printable View
Priming for one hour is nothing. Remember, you test for stability to BE SAFE. First test prime to make sure it's stable, then after that run games. So run prime or stress prime for at least 8hrs, first small ffts, the larke ffts.
i think i was very clear when i said aboveQuote:
Originally Posted by Dave_Sz
gonne try DDR540 nowQuote:
Originally Posted by SaFrOuT
For me:
DDR 400 @ 2.0-3-2-5-1T @ 2.6v
DDR 472 @ 2.5-3-2-5-1T @ 2.7v
DDR 510 @ 3.0-3-2-5-1T @ 2.7v
DDR 520 @ 3.0-3-2-5-1T @ 2.8v
All above settings are stable.
starts to get flakey around 270 HTT.
CAS 2.5 does not work at 250 HTT.
For the money, I am very happy with the performance of these sticks...get them while they are $185...
mucker
what si ur volt settings ?
I edited my last post to include voltages. I didn't bother with 2.6 volts but may try it some day. From past experiences, additional voltage really helps stability, and I'm not worried at all about a 0.1v increase.....
I think the new PC3200 OCZ GX XTC uses the same chips as this...
Check this thread out -
http://xtremesystems.org/forums/showthread.php?t=81276
Price: $249.99 - $30 Mail-in Rebate ($30 Off) = $219.99.
http://www.monarchcomputer.com/Merch...ricewatch&NR=1
Wow only 185 at the egg like mucker said... so tempting, it might be time for me to jump on the 2GB band wagon. :p:
now i am stable 100% with settings 240x10
DDR480 2.5-3-2-7 @ 2.7vdimm
http://img296.imageshack.us/img296/6...r5005hz.th.jpg
Vdimm 2.7 also :D
NewEgg will back to stock in this few days :)
i will try to ship it out ASAP
My sticks:
255FSB @ 2.5-3-2-5 Superpi 32m STABLE
http://img129.imageshack.us/img129/8...killzx2.th.jpg
Memory is out of stock and it's $225 again.
not a good value when for 8 bucks more, you can get the pc4000 version.
PC4000 @ 3-4-3 while this can do PC4000 @ 3-3-2
The memory is rated 3-4-3, that doesn't mean it can't do lower.
what 3-4-3 :confused:
I think he's talking about HZ which is 3-4-4-8 not 3-4-3-?.
it rated @ 3-4-4-8Quote:
Originally Posted by Dave_Sz
Prime stable for almost 4 hours @ 248FSB 2.5-3-2-5
http://img442.imageshack.us/img442/5...fsbcas2.th.jpg
Love these sticks :clap: Next shot will try for 4 hour prime stable @
255 2.5-3-2-5
what voltage
and yes i was talking about HS so it is 3-4-4-
and form what i have seen no PC4000 rated 1GB moudle could do DDR400 @ CAS2
2.8v if it was me you were asking. Not sure :stick:
Nice sticks Tibu :) . I tried your settings, it will boot, but not into memtest. I am unsure of your settings simply because I cannot see some of them, more specifically these settings:
Write CAS latency: ?
Skew Control: ?
Skew value: ?
DRAM Drive strength: ?
DRAM DATA Drive strength: ?
DRAM response time: ?
Could you provide that info please? Thank you!
m :)
Write CAS latency: Dunno, 704-2bta bios doesn't have that setting
Skew Control: AUTO
Skew value: 0
DRAM Drive strength: NORMAL 4 (me thinks its 8 value on non 704-2bta bios)
DRAM DATA Drive strength: 1
DRAM response time: FAST
Hope it helps.
Nice work
That helps alot, I'll give it a shot. I am using 623-3 offiicial and orange slots. Are you orange or yellow?Quote:
Originally Posted by Tibu
May have to give the 704 a try. I used it with my TCC5 and liked it. Thanks a ton! :toast:
m