btw does the BH-75 clock good to? ive seen a DDR266 stick with those ICs
Printable View
btw does the BH-75 clock good to? ive seen a DDR266 stick with those ICs
I once had a stick with these chips, but it didn't even hit 200 MHz. Although I have to say, that at that time, I didn't test with a higher vdimm than 3,0V. But 3V and no 200 Mhz doesn't sound too good.
Even though I'd say: If you can get it for cheep, then get it and test it yourself. Perhaps you are lucky and it's good. ;)
okey.. maby ill buy it for a cheep sum.
i have some BH-5 sets but i've only removed heatspreaders off the 2x256MB PC3200 Kingston HyperX kit...
so far i've had it up to 263Mhz @ 3.55v benchable on DFI NF2 Infinity. i can't remember how well they did with Goldmemory and Memtest86+, though.
stick #1 is "316we" but Everest and CPU-z say "week19/2003"
stick #2 is "326wf" but again soft shows "week27/2003"
see for yourself, buddy...
I was reading this stiky and i want to share with you my test with one off my sticks of Ocz Pc3500 limited Edition Bh5
http://ricardosimoes.no.sapo.pt/290_sandra_2225.jpg
I didn´t have the time to test both sticks but after the test tomorrow i will test them .
Cumps
darn 291 :D mhz :banana::banana::banana::banana:e wat voltage?
@ 3.7 volts with the vio and Ocz 520 W
cumps
I managedd 260FSB w ith one stik of 512 3500 Corsair C2 3,3V but not really stable, perfectly stable at 250 2-2-2-2-11 2×256 3,1V
Have you tried with higher VDimm jokker?Quote:
Originally Posted by |-jokker-|
That is a MASSIVE 2-2-2 overclock, congratulations!!!
Maybe 3.8v-4.0v will get you 300 2-2-2 :D
Tomorrow i will try only for test with 3.8 that´s te top that my ocz can give me .
Expect new things :D
KHX PC3000 2*512 chips. I managed to get a heatspreader off and this is what the chips said;
Kingston
V57154
0304 P01
D328DW-45
What does this mean?
means you have BH-5 relabelled 0304 which is good....past 0318 it's prolly CH-5
esdee, would be nice if you could remove the heatspreaders, if you dont want to no big deal :)
ElixXx, i think not all 19 chips are ch5, i guess those are still bh5... dont think they would mix bh5 with ch5...
Rabbi_NZ, that doesnt sound like bh5...
rapra, thx :toast: but whats the max stable? 260?
ElixXx, bh-75? never heard of that... ive seen ah5 and ah6 wich was the oldest winbodn memory i saw. ah6 was very weird ram that barely hit 200mhz with 2.5-3-3 and ah-5 was on a very old videocard and clocked to 180mhz on the videocard LOL :D
bachus_anonym, thx michal! :toast: will add it both with chip setting and week date then :)
|-jokker-|, what steppings? please post more details and the chip steppings and the spd eeprom programming week date :toast:
hey jesus, lol, welcome to XtremeSystems :toast: :D i guess we are truly blessed ^^
could you post the chip stepping and the spd eepron week stepping please? and mobo details :D
[-Stash-], its bh5... too bad kingston relabeled the chips :/
anyways, can you post the spd eeprom date you can read out with aida32 or another tool like that? and please post your oc results and mobo details, thx :toast:
saaya i want to, but they are SO glued !!!Quote:
Originally Posted by saaya
hmmmm heat them with a hair drier and then carefully and steadily pull the side up.
pull for 5 minutes or so and it will very slowly start to lift up. be very patient.
Can you say me where can i see this info man , i be glad to give it to you but i don´t know where to see it .Quote:
Originally Posted by saaya
Take off ut heatspreader and u will see it! ;)
how high does the just-in-stock mushkin 512 bh5 sticks overclocks? anybody tested them?
I don´t want to do that :PQuote:
Originally Posted by GravediggA
That is fine the way it is
I have 2 x 512M of Corsair XMS3500 v1.1
both sticks max out at 267fsb @ 2-2-2-5-8-12-2-2-1-1-1t @ 3.4v
first stick, bought December 2002:
Winbond
2372D
W942508BH-5
second stick, bought May 2003:
Winbond
311WE
W942508BH-5
both pcb's say:
CORSAIR
50-00107 Rev A1
I'll need to increase my 3.3v rail or get a booster to see how far they'll go with a decent amount of juice. :)
edit: just read the whole thread, here are some more details:
the above fsb was what I arrived at when trying to find my max 3DM2k1 speed, so 267fsb is stable for 2k1/SuperPi/Memtest (about half an hour), using 1 stick. I've never tried Prime before (looked too fiddley, I'm more of a "open program - click a button" type person). :)
Unsure what both sticks will do together as my chipset or mem controller doesn't seem to like over 255 (I run both sticks at 250, 2-2-2-5 for games etc).
This thread has inspired me to get a Booster this week, so I'll see what 3.6-3.8 will do, and I may try dual-channel in my P4 rig (2.8c, DFI Lanparty 875ProB).
great thread... very interesting! :toast:
Quote:
Originally Posted by saaya
Will do that tommorow !!! thanks!
So if I gave this RAM a little more juice, say 3.2v it should do closer to 240MHz ish?Quote:
Originally Posted by TEDY
Saaya: I'll get onto the AIDA32 details and try using a little more juice on the chips to see what they'll really do. Was a bit scared to go over 2.9v, but now I see they're quite happy with +3.3v
OK, here's some more details on this KHX PC3000
http://scammell.co.uk/TEMP/KHXPC3000.gif
you have DFI
give them 3.3vdimm and cool them with 80mm fan
@[-Stash-]
What is that program with the mem details ?