CAS 5 is real as long as you set it during Memory Training NOT AFTER
you can tell by perf diff immediately
CAS 5 is real as long as you set it during Memory Training NOT AFTER
you can tell by perf diff immediately
Good to know, thank you PeterQuote:
Originally Posted by LardArse
Quote:
Originally Posted by l0ud_sil3nc3
True , but when u bench PSC or some wired memory chip
u will see difference between CL8 and CL7 in OS immediately
CL6~CL5 u need lower TCWL also . Or the eff will be still the same . Even worse.
CL4 is some kind of BIOS code bug ... It will return back to the value u set in BIOS .
Apacer 32GB kits is awesome . 2854 12 13 13 35 still going ..
http://picx.xfastest.com/nickshih/asrock/28541213.jpg
vdimm?
Asrock OC formula have power in 3dmark2003 to :)
http://www.hwbot.org/image/842344.jpg
Quote:
Originally Posted by emertX
1.65 only .. it really awesome kits
Quote:
Originally Posted by Billy-The-Kid
damn congrats ...well done
So I can replicate my vdimm issue without a hitch, if I set any vdimm north of 1.8 (1.805+) it reverts back to 1.713v, however every value including 1.8v and below sets correctly, this was tested on the latest bios (1.15B&D).
do you have an ean-code?
Not sure I understand?Quote:
Originally Posted by emertX
Sorry...I meant nick...what is the productcode from the stix? I can't find them anywhere!
Quote:
Originally Posted by l0ud_sil3nc3
Strange . did this issue happen to air cooling or LN2 cooling ? I have sent u msg , please check it . hopes it will help u.
This board loves BBSE too :D
http://i900.photobucket.com/albums/a...ps5d86b020.jpg
well... what wrong on my setup for try to play CL5 & CL6 on this board ??? i have better results from CL6 over CL5 at 2400MHz and PSC chip
and for other subtiming all same setting :confused:
2400MHz 5-11-8-24-1T, 1.85V (air :D)
http://img.techpowerup.org/120921/pi32_2400c5-2.png
2400MHz 6-11-8-24-1T, 1.85V
http://img.techpowerup.org/120921/2400c6-2.png
and.... not only on high frequency of RAM to see different but i back to try with normal clock at 1600MHz compared by 5-9-9-24-2T and 6-9-9-24-2T
(used 2T for lower Vdimm ;)) all subtiming are same and it same case like above CL6 still better over CL5 and big different as well for Spi32M from two time running :confused:
CAS5 - Spi32M first run 07.31.044s | second run 07.30.685s
http://img.techpowerup.org/120921/cl5.png
CAS6 - Spi32M first run 07.28.907s | second run 07.27.845s
http://img.techpowerup.org/120921/cl6.png
btw. 1.15D nice one for PSC ram kit Nick :up:
Quote:
Originally Posted by ZoLKoRn
hey bro . U need to set CL5 in BIOS . then u will see CL5 get boost .
TCWL need tight also . This one can be set in OS
Quote:
Originally Posted by nachtfalke
damn ur bbse is awesome -.- ..... i got :banana::banana::banana::banana:ty bbse here haha...
Lastest BIOS and Software . bios: 1.15D software : 0917
http://picx.xfastest.com/nickshih/asrock/Z77OCF115D.rar
http://picx.xfastest.com/nickshih/as...latool0917.rar
Yes, i set CL5 in bios and boot direct not set in windows and for TCWL maybe my ram can lower 8 i already try to lowQuote:
Originally Posted by nickshih
but it crash
Quote:
Originally Posted by ZoLKoRn
TCWL is the key ...if u cant tight it ... then cl5 will be slower ....
u can try to loose some subtiming .. TRRSR TWWSR etc.. some cant be 1 . only 2~3 is proper . it is depends on ur memory .
Nice start, now let's see 32M action iso 1MQuote:
Originally Posted by nachtfalke
I tought tRRSR and tWWSR are lowest value 4 Nick ? Doesn't setting a lower value result in eg value 7 ? Nice work on the DIMM compatibility ASRock ! Top Job !Quote:
Originally Posted by nickshih
Quote:
Originally Posted by Leeghoofd
ha i just mean sort of those subtimings .... TRRSR and TWWSR lowest is 4 when u set higher than 2400 for sure....
For example , this pic is performance level 5 in bios . U can also choose performance level 4~1 to tight those timing automatically depends on the memory ability.
http://picx.xfastest.com/nickshih/asrock/level5.jpg
Okay i'll try tonight again on now very hot at my house hahaha...Quote:
Originally Posted by nickshih
Thx
I was bored today :)
Attachment 130220
Attachment 130221
Attachment 130222