what about i7 980X ?Quote:
Originally Posted by Nickel020
Printable View
what about i7 980X ?Quote:
Originally Posted by Nickel020
980x is a single die.
Vapor: have you ever thought to test HF with custom more restrictive plate aswell (eg. single line)? I'm somehow predicting that while restriction will go up (but it has more room to, as block is less restrictive then eg. CPU360/Kryo even with most restrictive and effective plate #1), it will reclaim top performance spot?
A Supreme HF with more restrictive plates would definitely be an interesting test :yepp:
Unfortunately, with only 1 blank supplied per block with no option to buy more (and the fact it's stainless steel--not easy to machine at home), the ability to test it is limited. I modded my Plexi HF and gave it to skinnee for a different project, but I'll probably be buying a HF Cu shortly and might be able to explore midplates with that.
Vapor: i'm pretty shure that Eddy_EK will be willing to suply few of blanks for testing sake on request ..
Which plate is recommended to use with the hf supreme ? Since they send about 4 diff ones from ek
Plate 1 (the one with two slits) was the best in my testing. I think it's the stock plate in the recent Supreme HFs.Quote:
Originally Posted by Aedubber
It is!Quote:
Originally Posted by Vapor
Acrylic Cover: Sanding and Shiny
BEFORE
http://skinneelabs.com/assets/images...HF/Upskirt.jpg
http://v2b.skinneelabs.com/assets/im...F/Chastity.jpg
AFTER
.
So you sanded the acrylic top? I can't really figure it out.
Plated.Quote:
Originally Posted by ScottALot
Yeah, I think he made the cloudy parts of the acrylic clear and shiny.Quote:
Originally Posted by ScottALot
His base was already plated, IIRC :)
JET PLATE #2 (Mod)
JASSAF: and temps?
Quote:
Originally Posted by churchy
my radiator is to dirty to run the test at the moment. In my new waterbock i used a jet plate (1.05 x 30mm) and the gain was 0.75°C :up: (my previous jet plate: 0.75 x 30mm with two channels). i belive he HK Supr HF must follow he same tendence.:clap:
Rad dirty or not shouldn't change relative result, if you test both jetplates with rad of same dirtyness :). Good to keep ambient temps same with AC during all the time of tests aswell.
EK-Supreme HF - Full Nickel
Is there a difference between that this http://www.performance-pcs.com/catal...ducts_id=26784 and this http://www.performance-pcs.com/catal...ucts_id=27631? water block
Performance-wise, probably not. It's the same block, one with a plexi top, and one with a gold plated copper top.
JET PLATE #2 (Mod)
after cleaning up the radiator, the testīs result was: 0.25°C more than Jet plate #1Quote:
Originally Posted by churchy
EDIT: That was not my intention. im sorry
.
Are you seriously trying to directly compare temps from two different testbeds? :wth:
EDIT: or are you overlaying your difference between P1 and P2m on top of my chart? Either way it's deplorable.
Hey, is there a new version of the HF acetal/copper ? On the EK site, the pictures varies from performance-pcs, the new one sure also looks much better :)
"OLD?":http://www.performance-pcs.com/catal...ducts_id=27127
"NEW?":http://www.ekwaterblocks.com/shop/bl...al-nickel.html
loving the nickel cpu!!Quote:
Originally Posted by kazukun
what about new design EK SUpreme HF ??? some result
Wich pate jetis the best choice for block HF? After the tests, the best #1, or any other?