cinebench 11.5

Quote:

---

Originally Posted by FlawleZ

I have my 720 BE I plan to get setup soon I can compare with. In the mean time, a good friend of mine is scoring 3.3 I believe with his 720 BE at 3.6Ghz. You should try to bump your NB speed more you should see good gains if you can get it around 2800-3000Mhz.

---

Played abit today, max i reached is 2900MHz for the IMC stil sub 3 but i'm on xp 32bit. I'm interested in your 720 BE resullts and what difference the L3 makes. :up:
http://www.abload.de/img/290vmzd.jpg
Update: 3.02 played with HT and NB speeds, has (if) ony a small impact 3.01 at 2.4GHz.
http://www.abload.de/img/300_2700_2xm2o.jpg
With 2.4GHz i can go an tad higher with the cpu to get also 3.02
http://www.abload.de/img/302194l.jpg
Gotta meet the famiy now, happy christmas meanwhile

Played a bit more tonight. Seems my memory still had some room. Haven't finished pushing it yet either.

http://img.photobucket.com/albums/v3...412Mhz-Mem.jpg

finally caught voodoo, chilled water , 4875mhz cpu 1090t
http://i31.photobucket.com/albums/c3...nch/cin860.jpg


and 1 with my 965 on water , no chiller just outside air
http://i31.photobucket.com/albums/c3...nch/cin506.jpg

Quote:

---

Originally Posted by equinox1

finally caught voodoo, chilled water , 4875mhz cpu 1090t

---

Nice going on the X6! :clap:

According to the CineBench 11.5 Score Chart you are now in 1st place! (Lower MHz trumps tied scores).

Welcome to 1st place! :up:

http://img3.imageshack.us/img3/1826/861.png
Be nice, mmmkay :D? It took about 10 min to open the CPUz windows alone. Software startup errors out the wazoo just to get more than 4 windows open...

Air cooled. Cheap-o ASUS OEM HSF only meant for 89W CPU XD

is 1.8v correct? that sounds like quite alot for 2ghz 65nm..

Probably not correct. It's a 117W (or so) B1 stepping Barcelona Opty :p 2GHz and with all the glory of the TLB bug (TLB patch disabled for this run :D)


EDIT: Specs state 1.2V and 95W TDP, 75W ACP.

This is my Deneb entry :) 24/7 clocks
Cpu @ 1.4v, Cpu NB @ 1.35v and ram @ 1.7v (all in bios)
Watercolling, look in sig.

http://i258.photobucket.com/albums/h...n/CB115478.jpg

Not sure if this means anything, but heres some extra stats while the app was creating the score charts.

Score Chart Stats (up to post 311)

Code:

---

XtremeSystems/AMD/CineBench 11.5
--------------------------------
<<<- AMD X6 ->>>
Entries: 38
Total MHz: 160,974
Average MHz: 4,236
Total Points: 285.1
Average Points: 7.5
MHz Per Point: 564.6
--------------------------------
<<<- AMD X4 ->>>
Entries: 32
Total MHz: 127,028
Average MHz: 3,970
Total Points: 149.1
Average Points: 4.7
MHz Per Point: 852.3
--------------------------------

---

:worship:XtremeSystems/AMD/CineBench 11.5 Score Charts:worship:

Awww..... single CPU setup only?

Quote:

---

Originally Posted by jeremyshaw

Awww..... single CPU setup only?

---

No not at all,... but for the score charts I didn't think it would be fair to mix multi-socket setups with desktops.

PM me the links (in this thread) if you find any other AMD multi-socket systems.

I added a new score chart just for multi-sockets. ;)

EDIT: Update me! :)
I gained a whole 0.34 points going from XP-32 (3.83) to W7-64 (4.17). :D

MSI 770-C45 (BIOS 1.3)
X2-550(C2) @ 206x17 @ X4
AIR: ThermalTake Big Typhoon
Default Voltages, CnQ/C1E enabled, 24/7 stable 500+ days.
Win7-64 Ultimate

Why only default NB?

Quote:

---

Originally Posted by eXa

Why only default NB?

---

To get anything more out of this thing I'd have to start raising voltages and I just don't want to go there, system is mainly used to program so I need stability over speed.:p:
...Sure I could raise everything, open the windows so its below zero in the room, etc, :ROTF: just to post a score.:rolleyes:

I'm just the score keeper.:cool:

Next stop... Bulldozer II.... 2013?:shrug:

Ok. Tho i think you would get atleast 2.4ghz nb without any raise in voltage. ran mine at 2.6 with stock voltage(2.8 required a little more voltage). But if you dont do anything that really needs any speed it wouldnt gain you much anyways...

Quote:

---

Originally Posted by eXa

Ok. Tho i think you would get atleast 2.4ghz nb without any raise in voltage. ran mine at 2.6 with stock voltage(2.8 required a little more voltage). But if you dont do anything that really needs any speed it wouldnt gain you much anyways...

---

Even at 2.4 it needed a lil extra to be 100% stable, someone here said you need ram to match, I'm not into tweaking like I was years ago, now I just set it and forget it.

Going to make some changes to the charts

Well, if it merges the three charts, I'm a little bit against it... since it does detract from it. Maybe if there was a master chart after the three seperate ones.... (asking for a bit of work from you).

nice scores guys :) ;)

Now that I've got a handle on this new 1090 I had really hoped to join the 8.x club. :rolleyes:

Maybe if I'd gotten it to play nice with the Corsair hypers, the tighter timings would have put me there, but it was not to be....

Oh Well, this should move me up the chart a few spaces. :p:

http://i30.photobucket.com/albums/c3..._792_1090T.png

nice run dave :D is yours on normal ambient? that is good core speeds if so :)

http://i70.photobucket.com/albums/i8...NB792score.png

Quote:

---

Originally Posted by crazydiamond

nice run dave :D is yours on normal ambient? that is good core speeds if so :)

---

Yeah, it's normal ambients CrazyD. Is yours? hehe... :p:

Dammit man, you were the one I was happy about beating...
How many better SS's you got there so I know how high I need to go. :cool:

I still need a pump to use outside air, it's ~70F ambient inside and the sensor off the radiator hit 73.5, so I'm defiently pushing it...

This is a fun benchy, you know if I run it enough times, I might get 7.93 and I'll be sure to post it! :rofl:

L8r......Dave

Here's what I see at 24/7 clocks. Got scores in there from my old i7 and my old Propus for comparison too.

--Matt

How I can beat this 2 WC Thubans?:-) Help please, my chip is at the end 4380 MHz run R11.5 is maximum :(

"how can i beat this 2 WC thubans?"

easy, get a custom water set up!!! :D i think it helps more on these 100% load benches


dave, my run was also normal 70f+ ambients.. still have never been able to get these x6's outside in the cold midwest winters :)

Nice scores guys! :clap:

Hope ya like the new score chart.:shrug:
Adding gradients made the image too big for this site so have to use an off-site host, using imageshack now.

OK, give me a time and Il try new personaly record :)