DFI Lanparty UT P45-T2RS Banter starts here!!!

Printable View

Show 100 post(s) from this thread on one page

12-02-2008, 08:15 AM
Kris

Quote:
Originally Posted by Kris View Post
Ran into some trouble.

I think I may have cooked the ram playing with some of C-N's voltage settings.

Update- Ram died! Old set passed. Oh well at least I had a spare set....
Sorry for your loss, The RAM is rated at 2.3v so it should have been alright but personally I would always use active cooling & I would have throttled the vdimm back as far as I could once I got the rig stable before pounding it with Prime95.

Now you've learnt the hard way, you wont do that again will you

I actually kept it @ 2.1 to 2.27. I think the ram might have been bad from the get go as I had so many issues when I first built the rig. To be honest I abused the crap out of my first set and they are still running strong.... As for active cooling I have a 150cfm delta pulling across the ram and enough 90 cfm fans in the case fans to blow the curtains in the window behind the case up the wall.:p:
12-02-2008, 06:25 PM
prostoman

Now I have tested different settings for Skews, and anything between 300 and 500 gives opportunity to boot at fsb498, while not possible otherwise. I also noticed that my core nr 1 and 4 are the strongest, while core nr 2 and 3 are weaker. So I have to sets of cores on the same level each. What I did was to try and change GTL values for cores in pairs. Ended up with GTL1:0.67, GTL2:0.63, GTL3: 0.63 and GTL4: 0.67. The result is: before, core 2 and 3 errored while priming at fsb495, after, all 4 cores priming with no errors. I still get random crashes and BSODs at fsb495 :(

Can anyone test if the things I mentioned in the last two posts work for you guys to get more stability on the edge? I still feel like there is no recepy for stable 500 on fsb, but I think I will use what I learned so far when going for higher CPU speeds :)
12-06-2008, 03:09 PM
Supershanks

Got my hands on the ddr3 version of this board DFI UT P45-T3RS some of the straps are a bit quirky but the 400 one rocks :)
First time i've got this far http://valid.canardpc.com/cache/banner/457234.png on a DFI ddr3 board.:up:
12-06-2008, 03:36 PM
prostoman

Quote:

Originally Posted by Supershanks

Got my hands on the ddr3 version of this board DFI UT P45-T3RS some of the straps are a bit quirky but the 400 one rocks :)
First time i've got this far http://valid.canardpc.com/cache/banner/457234.png on a DFI ddr3 board.:up:

Wow, not bad. Did you hit the wall yet? Or there is still some room for more? :)

It is about a week or more til I get to play with a E8600 in my board :(

Edit: Where did every one go? So quiet here lately.
12-07-2008, 06:11 PM
roedzzz

This is mine for fsb 600 x 7.5 Super PI 32M done just on air..

http://img247.imageshack.us/img247/2493/meexx9.jpg
12-08-2008, 12:53 AM
Supershanks

Quote:

Wow, not bad. Did you hit the wall yet? Or there is still some room for more?

It is about a week or more til I get to play with a E8600 in my board

I Hope not , CPU side seems to be clocking very easy. Waiting is always a pain , hope ya get a good one:up:

Nice one roedzzz :up:
12-08-2008, 05:23 AM
prostoman

roedzzz, getting my hopes up here, lol :)

Can you go higher? Looking at your ram my guess would be that it is hard enought as it is, hehe. I stand between 2GB of OCZ reaper 9200 and Flex 9200, dont know what to get for high fsb attempts. My 4GB stops at 1120MHz, and i dont want to push it.

Btw, I am sitting at bios version 10/07/2008. Is there a better bios that would give me an advantage of some sort? Or is there noe point in updating?
12-09-2008, 08:41 AM
Kris

Right now it appears that 10-07-08 is the only bios out.
12-09-2008, 08:49 AM
C-N

I posted a link on the 1st page of this thread to the final 1007 BIOS & the BETA BIOS 1028.

Linky... http://img.lanparty.tw/Upload/BIOS/CM/L245DA28.zip
12-09-2008, 10:03 PM
roedzzz

More result for 7.5 x 611 boot from bios..
But only done for PI 8M..my bad procie or RAM i think :(
For detil of my result you can see at chip.co.id

http://img224.imageshack.us/img224/7914/56361326ze6.jpg
12-09-2008, 10:51 PM
noinimod

What ram chips complement this board the best? I read that they're rather picky on rams..
12-09-2008, 11:02 PM
Kris

Quote:

Originally Posted by C-N

I posted a link on the 1st page of this thread to the final 1007 BIOS & the BETA BIOS 1028.

Linky... http://img.lanparty.tw/Upload/BIOS/CM/L245DA28.zip

Any major changes with this bios? I generally stay away from beta's.
12-09-2008, 11:22 PM
DavidNJ

Hi!...I am probably ordering mine tomorrow...just don't tell my wife.

Questions:

1) What is the best reference for the different BIOS settings. There are a lot of them, and each manufacturer seems to define them a little different.

2) Is the memory, which has an analog Buck converter, 1 phase or 2 phase?

3) Does the northbridge or power require any additional cooling? Do you need to move a lot of air in the case? My CPU and usually my video is watercooled.

I expect to run it with my Q6700, 4x2gb Corsair 1066 5-5-5-15 memory, and 1 or 2 1gb 4850 graphics cards. The CPU and the cards are watercooled with Dtek blocks and a Thermochill PA120.3, shroud, and 3 Noctua P12 fans. The rad is positioned sideways to give 1+ft clearance on either side.

Thanks in advance!
12-10-2008, 02:32 AM
C-N

Quote:

Originally Posted by noinimod

What ram chips complement this board the best? I read that they're rather picky on rams..

DFI Official memory support

Code:

Memory chip description Size Component Side A-DATA DDR II 1000 DDR II 1000 A-DATA 512 A-DATA M2OMIAG3H3160INC5Z Double 512 M2OMIAG3H3160INC5Z Double DDR II 1000 A-DATA 1024 A-DATA DDR2 1000 1GX16 Double 1024 DDR2 1000 1GX16 Double APOGEE GT DDR II 1100 DDR II 1100 APOGEE GT 1024 APOGEE AU1G632-11GP101 CL:555-15 Double 1024 AU1G632-11GP101 CL:555-15 Double Buffalo DDR II 1066 DDR II 1066 Buffalo 1024 Buffalo FSX1066D2C-K2G Double 1024 FSX1066D2C-K2G Double CELL SHOCK DDR II 800 DDR II 800 CELL SHOCK 1024 CELL SHOCK CELL SHOCK PC2-6400-1024 Double 1024 CELL SHOCK PC2-6400-1024 Double CERTIFIED By ATI DDR II 800 DDR II 800 CERTIFIED By ATI 1024 OCZ OCZ2A8002GK Double 1024 OCZ2A8002GK Double Corsair DDR II 1100 DDR II 1100 Corsair 1024 Corsair CM2X1024-8884D CL:444-12 Double 1024 CM2X1024-8884D CL:444-12 Double Crucial DDR II 1066 DDR II 1066 Crucial 1024 Crucial BL12864AL1065.8FE5 Double 1024 BL12864AL1065.8FE5 Double ELPIDA DDR II 800 DDR II 800 ELPIDA 2048 NCP Platinum ELPT8AUDR-25M88 Double 2048 Platinum ELPT8AUDR-25M88 Double DDR II 800 ELPIDA 512 EQUAL DDR II 800(5) 512M X16 Double 512 DDR II 800(5) 512M X16 Double G.SKILL DDR II 1000 DDR II 1000 G.SKILL 1024 G.SKILL F2-8000CL5D-2GBPI Double 1024 F2-8000CL5D-2GBPI Double DDR II 1000 G.SKILL 2048 G.SKILL F2-8000CL5D-4GBPI Double 2048 F2-8000CL5D-4GBPI Double DDR II 1000 G.SKILL 2048 G.SKILL F2-8000CL5D-4GBPQ Double 2048 F2-8000CL5D-4GBPQ Double DDR II 1000 G.SKILL 1024 G.SKILL F2-8000CL5D-2GBPK Double 1024 F2-8000CL5D-2GBPK Double DDR II 1066 DDR II 1066 G.SKILL 1024 G.SKILL F2-8500CL5D-2GBPI Double 1024 F2-8500CL5D-2GBPI Double DDR II 1066 G.SKILL 2048 G.SKILL F2-8500CL5D-4GBPI Double 2048 F2-8500CL5D-4GBPI Double DDR II 1066 G.SKILL 1024 G.SKILL F2-8500CL5D-2GBHK Single 1024 F2-8500CL5D-2GBHK Single DDR II 1066 G.SKILL 1024 G.SKILL F2-8500CL5D-4GBPK Double 1024 F2-8500CL5D-4GBPK Double DDR II 1066 G.SKILL 1024 G.SKILL F2-8500CL5D-2GBPK Single 1024 F2-8500CL5D-2GBPK Single DDR II 1066 G.SKILL 2048 G.SKILL F2-8500CL5D-4GBPK Double 2048 F2-8500CL5D-4GBPK Double DDR II 667 DDR II 667 G.SKILL 1024 G.SKILL F2-5300CL5S-1GBNJ Double 1024 F2-5300CL5S-1GBNJ Double DDR II 667 G.SKILL 2048 G.SKILL F2-5300CL4D-4GBPQ Double 2048 F2-5300CL4D-4GBPQ Double DDR II 667 G.SKILL 1024 G.SKILL F2-5400PHU2-2GBNT Single 1024 F2-5400PHU2-2GBNT Single DDR II 667 G.SKILL 2048 G.SKILL F2-5300CL5D-4GBMQ Double 2048 F2-5300CL5D-4GBMQ Double DDR II 800 DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL5S-1GBNT Double 1024 F2-6400CL5S-1GBNT Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL4D-2GBPI Double 1024 F2-6400CL4D-2GBPI Double DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL5D-4GBPI Double 2048 F2-6400CL5D-4GBPI Double DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL4D-4GBPI Double 2048 F2-6400CL4D-4GBPI Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL4D-2GBPK Double 1024 F2-6400CL4D-2GBPK Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL5Q-4GBNQ Double 1024 F2-6400CL5Q-4GBNQ Double DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL4D-4GBPK Double 2048 F2-6400CL4D-4GBPK Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400PHU2-2GBNR Double 1024 F2-6400PHU2-2GBNR Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL5D-2GBNQ Single 1024 F2-6400CL5D-2GBNQ Single DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL5D-4GBPQ Single 1024 F2-6400CL5D-4GBPQ Single DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL6D-4GBMQ Double 2048 F2-6400CL6D-4GBMQ Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400CL4D-2GBHK Single 1024 F2-6400CL4D-2GBHK Single DDR II 800 G.SKILL 1024 G.SKILL F2-6400PHU2-2GBHZ Single 1024 F2-6400PHU2-2GBHZ Single DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL5D-4GBPQ Double 2048 F2-6400CL5D-4GBPQ Double DDR II 800 G.SKILL 2048 G.SKILL F2-6400CL5Q-8GBPQ Double 2048 F2-6400CL5Q-8GBPQ Double DDR II 800 G.SKILL 4096 G.SKILL F2-6400CL6Q-16GBMQ Double 4096 F2-6400CL6Q-16GBMQ Double DDR II 800 G.SKILL 4096 G.SKILL F2-6400CL6D-8GBMQ Double 4096 F2-6400CL6D-8GBMQ Double DDR II 800 G.SKILL 1024 G.SKILL F2-6400PHU2-2GBHZ Double 1024 F2-6400PHU2-2GBHZ Double GEIL DDR II 1066 DDR II 1066 GEIL 2048 GEIL GE24GB1066C5DC Double 2048 GE24GB1066C5DC Double DDR II 1066 GEIL 1024 GEIL GX22GB8500PDC Double 1024 GX22GB8500PDC Double DDR II 667 DDR II 667 GEIL 2048 GEIL Geil Black Dragon PC2-5300 Double 2048 Geil Black Dragon PC2-5300 Double DDR II 667 GEIL 2048 GEIL Geil2GBPC2-5300 Double 2048 Geil2GBPC2-5300 Double DDR II 800 DDR II 800 GEIL 1024 GEIL GX22GB6400UDC Double 1024 GX22GB6400UDC Double HYPER DDR II 1000 DDR II 1000 HYPER 512 Kingston KHX8000D2/1G Double 512 KHX8000D2/1G Double DDR II 1066 DDR II 1066 HYPER 512 Kingston KHX8500D2K2/1G Single 512 KHX8500D2K2/1G Single DDR II 1150 DDR II 1150 HYPER 1024 Kingston KHX9200D2/1G Double 1024 KHX9200D2/1G Double DDR II 800 DDR II 800 HYPER 512 Kingston KHX6400D2LLK2/1GN Single 512 KHX6400D2LLK2/1GN Single DDR II 800 HYPER 1024 Kingston KHX6400D2LLK2/2GN Double 1024 KHX6400D2LLK2/2GN Double Hynix DDR II 667 DDR II 667 Hynix 2048 NCP Platinum HYNT8AUDR-30M88 Double 2048 Platinum HYNT8AUDR-30M88 Double DDR II 800 DDR II 800 Hynix 2048 NCP Platinum HYNT8AUDR-30M88 Double 2048 Platinum HYNT8AUDR-30M88 Double Hyper DDR II 1066 DDR II 1066 Hyper 1024 Kingston KHX8500D2K2/2G Double 1024 KHX8500D2K2/2G Double DDR II 800 DDR II 800 Hyper 1024 Kingston KHX6400D2LLK2/1G Double 1024 KHX6400D2LLK2/1G Double DDR II 800 Hyper 2048 Kingston KHX6400D2K2/4G Double 2048 KHX6400D2K2/4G Double Kingston DDR II 667 DDR II 667 Kingston 2048 Kingston KVR667D2N5/2G Double 2048 KVR667D2N5/2G Double DDR II 667 Kingston 1024 Kingston KVR667D2N5/1G Double 1024 KVR667D2N5/1G Double DDR II 667 Kingston 512 Kingston KVR667D2N5/512 Single 512 KVR667D2N5/512 Single DDR II 800 DDR II 800 Kingston 2048 Kingston KVR800D2N/2G Double 2048 KVR800D2N/2G Double DDR II 800 Kingston 1024 Kingston KVR800D2N6/1G Double 1024 KVR800D2N6/1G Double DDR II 800 Kingston 2048 Kingston KVR800D2N6/2G Double 2048 KVR800D2N6/2G Double DDR II 800 Kingston 1024 Kingston KVR800D2N5/1G Double 1024 KVR800D2N5/1G Double MKX22D64M28G-25 DDR II 800 DDR II 800 MKX22D64M28G-25 1024 Mushkin EB2-6400655512-2GD Double 1024 EB2-6400655512-2GD Double Micon DDR II 1000 DDR II 1000 Micon 1024 A-DATA M2OMIAG3H3160INC5Z Double 1024 M2OMIAG3H3160INC5Z Double DDR II 1000 Micon 512 A-DATA M2OMIAG3H3160INC5Z DDR2 1000+ single 512 M2OMIAG3H3160INC5Z DDR2 1000+ single DDR II 1200 DDR II 1200 Micon 1024 Team Group TXDD1024M1200HC5 CL:555-15 Double 1024 TXDD1024M1200HC5 CL:555-15 Double Mushkin DDR II 1000 DDR II 1000 Mushkin 1024 Mushkin TXPR2-8000-45411-2GD CL:454-11 Double 1024 TXPR2-8000-45411-2GD CL:454-11 Double DDR II 800 DDR II 800 Mushkin 1024 Mushkin EB2-6400-55512-2GD Double 1024 EB2-6400-55512-2GD Double NCP DDR II 800 DDR II 800 NCP 1024 NCP NCPT7AUDR-25M48 Double 1024 NCPT7AUDR-25M48 Double OCZ DDR II 1000 DDR II 1000 OCZ 1024 OCZ OCZ2TA1000VX22GK Double 1024 OCZ2TA1000VX22GK Double DDR II 1066 DDR II 1066 OCZ 1024 OCZ OCZ2N1066SR2GK Double 1024 OCZ2N1066SR2GK Double DDR II 1066 OCZ 2048 OCZ OCZ2RPR10664GK Double 2048 OCZ2RPR10664GK Double DDR II 1150 DDR II 1150 OCZ 1024 OCZ OCZ2FX11502GK Double 1024 OCZ2FX11502GK Double DDR II 800 DDR II 800 OCZ 1024 OCZ OCZ2A8002GK Double 1024 OCZ2A8002GK Double DDR II 800 OCZ 1024 OCZ OCZ2G800R22GK Double 1024 OCZ2G800R22GK Double PATRIOT DDR II 1066 DDR II 1066 PATRIOT 1024 PATRIOT PVS22G8500ELK Double 1024 PVS22G8500ELK Double DDR II 1066 PATRIOT 2048 PATRIOT PVS24G8500ELK Double 2048 PVS24G8500ELK Double DDR II 1066 PATRIOT 512 PATRIOT PDC21G8500ELK Single 512 PDC21G8500ELK Single DDR II 800 DDR II 800 PATRIOT 512 PATRIOT PSD251280081/512 Single 512 PSD251280081/512 Single PQI DDR II 1066 DDR II 1066 PQI 2048 PQI PQI28500-4096DB Double 2048 PQI28500-4096DB Double Platinum Edition DDR II 800 DDR II 800 Platinum Edition 1024 OCZ DDR II 800 1GB CL444-15 Double 1024 DDR II 800 1GB CL444-15 Double Samsung - K4TIGQ84QA DDR II 667 DDR II 667 Samsung - K4TIGQ84QA 2048 Transcend TS256MLQ64V6U DDRII 667 Double 2048 TS256MLQ64V6U DDRII 667 Double Titanium Alpha DDR II 1000 DDR II 1000 Titanium Alpha 1024 OCZ DDR II 1000 1GB CL444-15 Double 1024 DDR II 1000 1GB CL444-15 Double DDR II 1120 DDR II 1120 Titanium Alpha 1024 OCZ DDR II 1120 1GB CL555-15 Double 1024 DDR II 1120 1GB CL555-15 Double Vitesta DDR II 667 DDR II 667 Vitesta 1024 ADATA DDR II 667(5) 1G X16 Double 1024 DDR II 667(5) 1G X16 Double XMS DDR II 800 DDR II 800 XMS 1024 Corsair CM2X1024-6400PRO CL5 Double 1024 CM2X1024-6400PRO CL5 Double XMS2 DDR II 1066 DDR II 1066 XMS2 512 Corsair CM2X512-8500 CL5 Single 512 CM2X512-8500 CL5 Single DDR II 1066 XMS2 1024 Corsair CM2X1024-8500C5 CL5 Double 1024 CM2X1024-8500C5 CL5 Double DDR II 667 DDR II 667 XMS2 512 Corsair CM2X512-5400C4 CL4 Single 512 CM2X512-5400C4 CL4 Single DDR II 800 DDR II 800 XMS2 1024 Corsair CM2X1024-6400C4 Double 1024 CM2X1024-6400C4 Double XTREEM DDR II 1000 DDR II 1000 XTREEM 1024 Teamgroup TXDD1024M1000HC5 Double 1024 TXDD1024M1000HC5 Double DDR II 800 DDR II 800 XTREEM 512 Teamgroup TXDD512M800HC4 Single 512 TXDD512M800HC4 Single DDR II 800 XTREEM 1024 Teamgroup TXDD1024M800HC4 Double 1024 TXDD1024M800HC4 Double XTUNE DDR II 1066 DDR II 1066 XTUNE 1024 AENEON PC28500U-555-12 CL:555-12 Double 1024 PC28500U-555-12 CL:555-12 Double DDR II 1142 DDR II 1142 XTUNE 1024 AENEON AXT760UD00-18DB98X Double 1024 AXT760UD00-18DB98X Double DDR II 800 DDR II 800 XTUNE 1024 AENEON AXT760UD00-25CC97X Double 1024 AXT760UD00-25CC97X Double kingston DDR II 667 DDR II 667 kingston 512 Kingston KVR667D2N5/512 Single 512 KVR667D2N5/512 Single DDR II 667 kingston 1024 Kingston KVR667D2N5/1G Double 1024 KVR667D2N5/1G Double mushkin DDR II 800 DDR II 800 mushkin 512 Mushkin EM2-6400-55512-1GD Single 512 EM2-6400-55512-1GD Single DDR II 800 mushkin 1024 Mushkin EM2-6400-55512-2GD Double 1024 EM2-6400-55512-2GD Double DDR II 800 mushkin 512 Mushkin THP2-6400-45411-1GD Single 512 THP2-6400-45411-1GD Single DDR II 800 mushkin 1024 Mushkin THP2-6400-45411-2GD Double 1024 THP2-6400-45411-2GD Double

Quote:

Originally Posted by Kris

Any major changes with this bios? I generally stay away from beta's.

1028 BETA

Major Reasons of Change:
Fixed PCIE 4,2 Slot X4 , X1 issue

Quote:

Originally Posted by DavidNJ

Hi!...I am probably ordering mine tomorrow...just don't tell my wife.

Questions:

1) What is the best reference for the different BIOS settings. There are a lot of them, and each manufacturer seems to define them a little different.

DFI official overclocking guide: http://img.lanparty.tw/Upload/Catalo...t/UTP45_OC.pdf

DFI Official BIOS guide: http://img.lanparty.tw/Upload/Catalo...45T2R_BIOS.pdf

Quote:

2) Is the memory, which has an analog Buck converter, 1 phase or 2 phase?

Honestly don't know, Is it important?

I would ask over at the official DFI support forum, someone over there will know. If you find out don't forget to let us all know here please.

Quote:

3) Does the northbridge or power require any additional cooling? Do you need to move a lot of air in the case? My CPU and usually my video is watercooled.

Personally I would say if you are going to OC it then I would but stock ish should be fine without. I have a slow quiet fan on both my NB & PWM & the temps are kept in the low 40's with both my dual core & quad core.

I also always cool my RAM, HD's & have a couple case fans going so 2 more make no difference to me.
12-10-2008, 04:42 PM
Crossbone

I've been playing around with this board for a few weeks now, and while there were (still are to be honest) some parameters I don't understand nor know what they pertain to, I've got a pretty good handle on the board itself and have gotten my old, yet reliable Q6600 to 3.6.

I'm still aiming for the 3.87 I was able to get on the X38 (Maximus Formula), but one thing I've noticed is in order to get the same frequencies achieved on the X38 on the P45 requires a bit more voltage.

Is it just me, or has anyone else noticed this as well?
12-11-2008, 03:12 PM
PolRoger

I've been struggling with this board today... and I've been getting plenty of "C1" messages on the LED display after a failed overclock attempts. Does anyone know what that means?
12-11-2008, 03:15 PM
Jor3lBR

Quote:

Originally Posted by PolRoger

I've been struggling with this board today... and I've been getting plenty of "C1" messages on the LED display after a failed overclock attempts. Does anyone know what that means?

In my experience: Insufficient Memory and/or North Bridge volts :up:
12-12-2008, 12:34 PM
prostoman

I have been getting plenty of C1 errors myself over the times. C1 is usually memory related, either your memory is over the limit, or NB is on the limit. Talking both from experience, and what I red at DFI forum.
12-12-2008, 12:54 PM
PolRoger

Thanks guys,

That info should be helpful when I get back on this board.
12-12-2008, 05:34 PM
DavidNJ

I should be getting my board on Monday. I expect to run it with a Q6700 and 8gb of Corsair 5-5-5-15 DDR 1066 memory.

Would one of you nice posters want to volunteer a good initial setup? The processor has run 10x360 on a motherboard that wouldn't run over 360 reliably, not even 6x365. The memory has been very finicky above 1066; however that may be a function of memory power stability.

Recomendations?

Thanks in advance!

P.S. The CPU and eventually the GPU will be water cooled. If necessary, the power circuit, northbridge, and southbridge could also be watercooled. It will have a 1000w PSU, probably a Corsair, maybe a Cooler Master, depending on which case it ends up in.
12-15-2008, 06:33 PM
Crossbone

This board is being a stubborn pain in my arse, I can get 3.6 stable, but I have yet to get anything else stable. I know for a fact my quad is capable of 3.87 @ 1.5125v, although as recent procedures have proven that would equate to 1.53-something on this board...but nonetheless it's finnicky about the settings used and I'm running low on patience...

Not really, but I am getting annoyed having to restart and bump up a specific parameter every five minutes. Anyone have any luck with this board using a quad?

Edit: Another thing, anyone know if two blocks I brought for the Maximus Formula awhile back (when it worked) will fit on this board? It appears to line up but I really don't feel like taking the board out and measuring just to have wasted time.
12-15-2008, 07:19 PM
SNiiPE_DoGG

just got my testbench going with the T3RS, subzero ambient water benches incoming ;)
12-16-2008, 12:30 AM
SNiiPE_DoGG

Hey guys quick update here:

the T3RS here has some pretty good abilities from what I have seen so far. ONE BIG problem though: NONE of the ram straps work whatsoever on release BIOS. the only ram strap that works above 1333 is AUTO lol. You might say "but isn't auto one of the selectable straps?" well yes and no, it appears to be the same as 333/1333 strap however, if you have a working prime stable setup with auto ram strap and you change it to manual 333/1333 strap you get the dreaded C1 :(. Even the working auto strap is very finicky and has limited me to 425-428FSB depending on latencies, at 429 it wont work and I have tried jumping around above that number as CAS 10 and an x7 multi with no luck whatsoever

Tomorrow I am going to try the beta bios and we will see if they have managed to make a DDR3 bios with strats that actually WORK!

for only 425 FSB and CR2 this board handles itself quite nicely (PL7), need to bring up the copy somehow
http://img124.imageshack.us/img124/1...est1700hg6.jpg
12-16-2008, 01:07 AM
C-N

Quote:

Originally Posted by Crossbone

This board is being a stubborn pain in my arse, Anyone have any luck with this board using a quad?

My Q9650 runs just as well on my DK as it does on my LT, 470 ~ 485fsb is about its prime max depending on how much tweaking you want to do.

Gotta love the slightly out of context quote ay.... :D

Quote:

Originally Posted by SNiiPE_DoGG

for only 425 FSB and CR2 this board handles itself quite nicely (PL7), need to bring up the copy somehow
http://img124.imageshack.us/img124/1...est1700hg6.jpg

looks good & I'm sure once you find some fsb the copy will come up.
12-16-2008, 04:37 PM
DavidNJ

I've seen people display very neat lists of the BIOS settings. How do they get them? Is their a utility that prints them?

Show 100 post(s) from this thread on one page