Nice VID... :up: so was this screenshot taken when all 4 cores were fully loaded and none of them was idle? Some CoreTemp versions would show dynamic VID states so their values might depend on the load.Quote:
Originally Posted by cincyrob
Printable View
Nice VID... :up: so was this screenshot taken when all 4 cores were fully loaded and none of them was idle? Some CoreTemp versions would show dynamic VID states so their values might depend on the load.Quote:
Originally Posted by cincyrob
that was taken right after i used dvd-rebuilder. it wasnt underload. plus my ambient temp in the house was about 82f and where i have my system it is under a desk so it is a little warmer under there. have had the AC off the pass couple days its been nice and cool here. any ways.lol
that was at idle i can check it again tonight underload and see what it says. i do have it now running 3.0ghz small oc for now being new and all. leave it there for 24hr and in the morning i will bump it up to 3.2ghz i did notice all my settings are still in auto but with the little OC, underload the vcore has dropped from 1.210v to 1.185v is this normal? iknow of vdroooop with these gigabyte boards i had t oset my E8400 to like 1.365v and it would drop to like 1.265v. but i thought taht was a wolfdale thing???
Got this one today its on a crappy DS3 P35 motherboard I had laying around for crunching, air cooling, and does not seem to want to go over 440 on this board, it is batch L844B610.
http://i135.photobucket.com/albums/q...C/th_q9550.jpg
Quote:
Originally Posted by road-runner
looking good :up:
Now get one UD3P and give the sucker some volts :D
http://valid.canardpc.com/show_oc.php?id=605440
http://i72.photobucket.com/albums/i1...Q955032ghz.png
http://i72.photobucket.com/albums/i1...Q9550Mipps.png
got it up to 3.2ghz all settings still in auto.
well i couldnt hold back, here ya go.
http://i72.photobucket.com/albums/i1...036ghzCpuz.png
http://i72.photobucket.com/albums/i1...5036ghzIBT.png
http://i72.photobucket.com/albums/i1...ghzeverest.png
http://i72.photobucket.com/albums/i1...6ghzsandra.png
http://i72.photobucket.com/albums/i1...ndraburnin.png
I'm gonna rise the VTT, what is the voltage that I don't have to exceed ?
Sense me and My friend CincyRob are neighbors and compare notes :yepp:
I almost missed the bus with my results at 3.5Ghz's on a old P35 board:up:
Well my Results are in on this Old Board p35c I'm kinda glad kept it around for a backup board...I wanted to check it first to see what it would do, nothing added all at auto setting running 64 bit Xp Pro Tests where done on External case was not included...lol nexts week its the I45 turn to see it act with the Quad Jumper...Pics to follow
http://img521.imageshack.us/img521/1...uzquadcore.jpg
http://img197.imageshack.us/img197/39/sandratest.jpg
Intelburntest (Passed) Maxs stress 5 Passes
http://img204.imageshack.us/img204/4...elburntest.jpg
Vid is sweet http://img521.imageshack.us/img521/8338/coretemp.jpg
other links to pics with work in progress
temps
http://img174.imageshack.us/img174/9487/realtemp.jpg
orthos & screen shot
http://img204.imageshack.us/img204/9...screenshot.jpg
setup work station
http://img521.imageshack.us/img521/4469/1000271o.jpg
http://img174.imageshack.us/img174/7460/1000267.jpg
http://img204.imageshack.us/img204/6212/1000265.jpg
http://img174.imageshack.us/img174/5599/1000258.jpg
http://img174.imageshack.us/img174/1911/1000256c.jpg
http://img174.imageshack.us/img174/5715/1000261.jpg
http://img111.imageshack.us/img111/6524/1000252q.jpg
http://valid.canardpc.com/cache/banner/606327.png
http://valid.canardpc.com/show_oc.php?id=606327
all said and done the Q9550 is back in the box resting waiting on
the next test with I45 hoping to do well:)
Have Fun
Building:)
http://i72.photobucket.com/albums/i1...b/37ghzIBT.png
took it up again.
vcore in bios set at1.275v actuall during stressing 1.18-1.232v so still very love on vcore plenty of room for more when needed.
pretty low vidders there :) Have fun, both of you :up:
I got a couple of them, going to take the E8600 off of one as soon as I get time and stick the Q9550 in there... :DQuote:
Originally Posted by monza1412
ok im at the point my mem is holding me back. these crucial ballistix ddr2 800 isnt gonna take much more OC. anyone got any suggestions on some good mem to run on my mobo(GA-EP45-DS3R) DONT LAUGH i know its a crap board. i just had to have the first P45 gigabyte board when it came out..lol in a month or so i will be stepping into a ASUS P5Q Deluxe. so any ideas on some good mem to help me get to 4.0+???
Was looking through some ss's I had saved. I love this 9550. Best CPU I have owned I believe.
http://img401.imageshack.us/img401/7353/955011.png
that's a great chip OC Nub! :)
Thank you.
your kidding me right? What memory divider are you using?Quote:
Originally Posted by cincyrob
I strongly suggest you to grab the UD3P/R bud. 500fsb hassle free.Quote:
Originally Posted by cincyrob
Quote:
Originally Posted by OC Nub
Im speechless mate, that chip is really something. :D
Quote:
Originally Posted by monza1412
im useing the 333mhz strapping and the 2.00d.
im not to sure i want another gigabyte board. ive had 4 of them and have had nothing but problems with them. i think it might be time i give another manufacture a shot..lol
my mem now is runnng at 872mhz. i dont think it could handle 900mhz for any amount of time. i hav eno faith in these crucial ballistix ddr2 800 i have RMA'd them 3 times
Im sorry, but its a 2gb kit or a 4gb kit?Quote:
Originally Posted by cincyrob
If its a 2gb kit are double sided? (check the number after the dot that I mark in the picture, starts with 16 or 8?)
http://img190.imageshack.us/img190/2796/dsc07421n.jpghttp://img190.imageshack.us/img190/d...jpg/1/w700.png
2 gig kit and single sided
Quote:
Originally Posted by cincyrob
doh. that sucks :down: If you are looking for a 4gb kit, the low volts ocz blades would be my choice.
these look good right now too! :)
http://www.amazon.com/dp/B002845LDC/...0&linkCode=asn
Thank you monza.
well i tried it at 4.0===no go
tried it at 3.83======no go
back at 3.7ghz just fine. my mem cant handle 902mhz at 3.83ghz it would load windows but as soon as i tried to stress test it, it would fail and shut down.
so in due time i will be getting me some 1066 mem.
I just got that same batch number today but can't try it out until Thursday. How did you do?Quote:
Originally Posted by cincyrob
I will have it under the same OCZ Vendetta 2 on a Biostar I45 T-power P45 motherboard.