DFI LANparty DK P45-T2RS/T3RS (Intel P45) - News|Info|Results

Mine is on the way :D What were your settings for FSB 615mhz? That' s a really nice E8400 you have there btw ;)

I don't have them right now but as far as I can remember might be:
vcore:1.33v
vpll: 1.55v
vnb: 1.49v
vtt: 1.35v
CPU GTL: 0.61
NB GTL. 0.58
FSB Vref: 2A

Quote:

---

Originally Posted by Blackoberst

I don't have them right now but as far as I can remember might be:
vcore:1.33v
vpll: 1.55v
vnb: 1.49v
vtt: 1.35v
CPU GTL: 0.61
NB GTL. 0.58
FSB Vref: 2A

---

Just tried these and am having much better luck stabilizing my E8500 @ 4.2. Would you consider VTT @ 1.35V Safe for 24/7?

Quote:

---

Originally Posted by nidecker

I've see the same overvoltage here (912)
1,14V bios set -> 1,15
1,2 " -> 1,24
1,3 " -> 1,4
1,35 " -> 1,45

But this Jr perform really well...600 fsb orthos stable easy to get
DFI :clap::up:

---

Went back to the official 812 BIOS cos on my E0 Q9550 rig, the new 912 beta also seems to have problems with cold boots and reboots too, seems unable to lock in on the o'c FSB clocks.

Quote:

---

Originally Posted by nzbleach

Just tried these and am having much better luck stabilizing my E8500 @ 4.2. Would you consider VTT @ 1.35V Safe for 24/7?

---

Those were for 615x6. :D

For lower FSB you don't need so much vtt and also you can drop vNB.

I've got a problem with DK P45 plus version with E8400 E0 . Thought I can do easily 500*8 but I Cant, though I think I put enough vCore to 1.4 and VDimm to 2.1
with beta bios 09/10.

any suggestion?

Has anyone going for high FSB experienced a hard wall? I've gone up to 563FSB without really touching anything and then I can't go any further regardless what I do. Is it common to hit such a wall then have to go crazy on the voltage to go any higher? If I go to 564FSB (or above) with the same settings, the system won't even post. Settings using a E8600:

vcore:1.43v
vpll: 1.55v
vnb: 1.40v
vtt: 1.38v
GTL: 61x 61x 58x
FSB Vref: Auto

Quote:

---

Originally Posted by HousERaT

Has anyone going for high FSB experienced a hard wall? I've gone up to 563FSB without really touching anything and then I can't go any further regardless what I do. Is it common to hit such a wall then have to go crazy on the voltage to go any higher? If I go to 564FSB (or above) with the same settings, the system won't even post. Settings using a E8600:

vcore:1.43v
vpll: 1.55v
vnb: 1.40v
vtt: 1.38v
GTL: 61x 61x 58x
FSB Vref: Auto

---

61x doesn't work for all CPUs...try 63x and give it a try....your Vcore shouldn't be that high either...and your vNB could go a bit higher.

Tried 63 and also 67. Also tried 2A/2B for the FSB Vref.

CPU voltage for 563x8.5 on air. I find it unlikely that's the issue. At least not for going up 1 Mhz.

What settings are you using for your rig? Perhaps I've missed something else.

I'm not saying I don't need more voltage in other places. I'm just shocked that I could hit such a hard wall where the system won't even post. I hope 563 isn't the limit for the CPU.

I figured it out. FSB hole between 563-570. Testing now at 575.

How far did u get bu now :D ?

Quote:

---

Originally Posted by Diegis0n

How far did u get bu now :D ?

---

This is how far I got before stopping. I'll press for 600 32mb stable later. :)

Nice one housERaT, im sure youll get your 32M 600fsb.

Can someone help me to find the other smartguardian or skin ?? I dont like the one that comes with P45 because it screws up me screens. I have seen other using the "old" ones which have simular dimensions to cpuz and gpuz but cannot find them :confused: Thanks :up:

my 24/7 OC for now :

http://i14.photobucket.com/albums/a3...ld/44prime.jpg

CPU isnt so great. Needs quite a bit of vcore to stabilize.

waaaaaaa man i was doing so well on some 3d benches with my e8600 510x10(took more volts then my ut p35 thou 1.55 and 1.50 for the p35)now "88"crap
i guess i'll give it a nap for a week,the normal few hours with the batt out no help.

Quote:

---

Originally Posted by Technoholic

Well, I read through the thread and I see nothing about the quad core. Why is that? :(

---

My Q9450 C1 result done today on a very hot humid day.
http://i173.photobucket.com/albums/w...RUE_IBT_OK.png

Yah I like the vdroop control option. I see vNB is overvolted a bit but VTT is not.

Quote:

---

Originally Posted by MacClipper

http://us.dfi.com.tw/Upload/BIOS/J245D912.zip

Caution with vNB values in this new BIOS, it seems to mislabeled the voltages by almost +0.1v on my set! Entering 1.312v in the BIOS gives me 1.408v according to ITE Smart Guardian. Entering 1.408v gives 1.5V.

Conversely, my saved profile with 1.4075v vNB in the old BIOS is now read as 1.312v chosen in the new BIOS.

Another added feature - Vdroop Control is a new option.

---

A Qns

what NB waterblock is able to fit this mobo ? thanks

is the bios settings here in the DK same with the JR?

Quote:

---

Originally Posted by emoners

is the bios settings here in the DK same with the JR?

---

Same settings
The only difference that I've note is the Vnb's JR that starts from 1,14. 1,18 min. value for DK

thanks nidecker

:confused:FSB600 x 7.5 32m pi
http://www.coolenjoy.net/bbs/data/ov.../600.jpg_f.jpg

FSB638 x 6
http://www.coolenjoy.net/bbs/multi_p...0ad3f19._f.jpg
http://www.coolenjoy.net/bbs/multi_p...2838_0863b0a0.
http://valid.x86-secret.com/show_oc.php?id=419014

FSB640 x 6
http://www.coolenjoy.net/bbs/multi_p...2838_5c424c88.

How do I run the DFI DK P45 T2RS PLUS vmod ...?
http://www.pctunerup.com/up/results/...fc1ca62ab6.jpg

Quote:

---

Originally Posted by namegt

How do I run the DFI DK P45 T2RS PLUS vmod ...?

---

Picture seems pretty much self-explanatory to me. Not sure what you're asking for.

I would like to know exactly how to vmod.
(100k or 50k ohm to ground)
I do not know whether any way to vmod ...