zoob: Are you talking about the E6700? (contact between IHS and HSF) It looks near perfect to me. What's bad is the E6600.
Printable View
zoob: Are you talking about the E6700? (contact between IHS and HSF) It looks near perfect to me. What's bad is the E6600.
Anyone?Quote:
Originally Posted by Mr.X
More Vcore?
I raised v-core to 1.42 and it seems stable now. I'm priming at 3.4Ghz now but temps are skyhigh. 62C with speedfan and 75C with core temp. Room temp 32C, ambient 35C.
ignore the temp as long as it's stable ;)
I can prime at 80+c core temp and the big typhoon isn't near warm
Wow, that's really high, even to me! Don't you risk frying anything with those temps?Quote:
Originally Posted by Supertim0r
olle_34 - 3600x1hr orthos (1.350) | TT Big Typhoon | GA-965P-DS3 | 2x1gig G.Skill6400HZ
E6300 week24 stepping 6
GA-965P-DS3
2x1gig G.Skill6400HZ
Vcore 1.350
ram 2.1
all other volts stock
F5c beta bios
TT BT
http://img245.imageshack.us/img245/1825/3200pj3.th.jpg
Sorry, I've updated the image to make it more clear which heatsink goes with which cpu :)Quote:
Originally Posted by lopri
The E6600 is nearly perfect, the E6700 is terrible.
it's probably now even close to 50cQuote:
Originally Posted by Mr.X
sensor are OFF
im getting an FSB wall around 450. But its stable at 450*8 (3.6GHz), dual prime and superPI. Vcore is at 1.55, MCH at +.1, mem at 2.4v. But something is not right. After the computer has "warmed" up, it will boot and run fine. But when i let it cool about an hr or so, it wont boot and the DS3 resets the settings and boots back in stock. has anyone had this happen? i have a week 26, i think it should go past 450. I dont think its the ram either, maybe it is? any suggestions?
UPDATE: it is not the CPU, i lowered the muti to 6X and it still wont boot. Something tells me it could be the ram. Im running it at 4-4-5-15, the rest is left at auto.
Here is my 24/7 OC until DFI releases a better bios. It seems my IHS is very flat as temps have been very nice as you can see. With a 90mm fan over the NB it doesnt break 40C.
E6600 @ 3.2Ghz 1.43v Week 24
DFI Infinity 975X bios 7/31
2GB Gskill HZ
Idle 30C Load 46-47C
Watercooled by Swiftech Storm
http://thecowsaysmoo.org/budwise/pic...Final%20OC.jpg
I just wanted to double check, I'm running 1.44v and my "CoreTemp/Intel TAT" temps hit a max of 58c running dual prime... is this reasonably low enough both in volts and temps for 65nm C2D?
I couldn't overclock at all before and I had a bunch of issues. My system was unstable and I couldnt overclock past 200fsb.
I got a new DS3 board and now doing 3.3ghz easy!
Quote:
Originally Posted by Frackal
Yes it seems to me to be about right ... I got 54C with WC :)
Allendale E6300 ES, Asus P5W DH Deluxe (0801) 2 x 1 GB Team Xtreem PC5300 @ 3-4-4-1 (410mhz 1:1)
Prime Stable @ 410 x 7 w/ 1.43v set in BIOS, 1.41v actual.
http://img.photobucket.com/albums/v3.../dual7hour.jpg
I got 2.93Ghz to run Spi32mb
http://img.photobucket.com/albums/v3...r/293032mb.jpg
2.9Ghz for 3Dmark06:
http://img.photobucket.com/albums/v3...3dmark06-1.jpg
Tee hee :).
Nice FSB :DQuote:
Originally Posted by olle_34
Got it this morning, room temp 21c, watercooled, 1.6v
http://img.photobucket.com/albums/v7...nroe-4-Ghz.jpg
Quote:
Originally Posted by Absolute_0
Nice!..:woot:
Here a Quick Screeny,I think I might have a Decent 6400 Step 6.
http://www.polarscomputers.com/Gigab...ong%20Shot.jpg
http://img205.imageshack.us/img205/607/3780mg7.th.jpg
Currently at 3780 mhz... but i dont think i can get anymore from here. i think this is max....
Anyone have a good temp program for asus p5w dh? i dont like pc probe...
~19min is really slow :p:Quote:
Originally Posted by bypolar
E6600 @ 4.0Ghz 1.56v Week 27
P5B-DELUXE(no mod)
air cooler:HR-01
http://i111.photobucket.com/albums/n126/ruei0888/W.jpg
On the AMD forum we used to have strict rules- at least 3H Prime stable OC was rendered stable - I don t think that a single SPI run is something
very particular - or let us start a new thread - "Prime stable overlocks " or something like that .
Let Eva 2000 or Absolute0 or other well known chaps / at least to me :) /
say their word about that.
There is a very good database over at [H]. It asks for 4H Prime/Orthos. I'd love to see something like that over here. Anyway, here's where I'm at so far...
Surely there's more in her, but the IHS pales in comparison to the E6300 I had. My paste applique looks almost as bad as zoob. Probably hit it with sand before I push any harder...
CPU-Z's still reading the CL wrong...it's 5, not 3.
E6400: 2.130GHz
OC: 3.300GHz
Stepping: 6 B2
Week: L625
Code: A301
Vcore: 1.325V
Cooling: Air
P180 w/ 3 Tricool fans on Med
Zalman 9500 High
Ambient: 25C
Idle: 36C (Outlook, Firefox, etc.)
Load: 57C (Orthos 11+ hours)
Mobo: Gigabyte GA-965P-DS3
Bios Version: F4C
FSB: +0.1V
MCH: +0.2V
Ram: Corsair DDR2-6400C4
Speed: 824Mhz (412*2)
Latency: 5-5-5-15
Vdimm: 2.1V
Pics:
http://img.photobucket.com/albums/v2...64003300v5.jpg
http://img.photobucket.com/albums/v2...IMG_1129-1.jpg