nice plug for a great siteQuote:
Originally Posted by alpha0ne
Printable View
nice plug for a great siteQuote:
Originally Posted by alpha0ne
AMD 3200+
LBBLE 0521 APIW
2536 @ 1.56V
2710 @ 1.6V
2912 @ 1.72V
under water. temps are 32*C idle 36*C under load.
not tested for stability yet.. just experimenting to see how high it will go..
mem is clocked @ 100 divider so the Chip is stable for everything just no performance gain.
@ Lestat, yeah, that's what I think I'm gonna do, I feel sorry for the people who buy their processors on eBay :D , seeing as they buy the bunk ones people like me sell, I was kind of hoping to get at least 2.8 out of the chip, and I don't want to go over 1.6vcore, I'm not as extreme as the rest of you guys, I could be called a mainstream overclocker, but at 1.6 I actually am able to get 2760, I guess maybe I should let it burn in some more, maybe it will get a wee work out while burning in the new VX.....
Quote:
Originally Posted by alpha0ne
That was what I was basing my attempts on. However, the problem turned out to have nothing to do w/how or what I was doing, but rather one of Bios.
Went to V1.1 and as of lastnight I am stable (Memtest & Prime) @:
http://valid.x86-secret.com/show_oc.php?id=31233
I know that my memory can do 227 w/2-3-2-5 1T timings, so I expect to see even greater gains. Running Prime right now @:
http://valid.x86-secret.com/show_oc.php?id=31198
If it holds up there I will go to MemClock of 180 and let her rip.
I am a happy OC'er now!
~HB
p.s. Great Guide. Thought a Quoted plug wouldn't hurt ;)
@ Absolute_0.
Friend.
Their memory are TCCD or TCC5?
Excellent clocks.
Sincerely I congratulate it.
Until soon
After sending out over 100 emails, I've located some 517's in the great Canadian Frozen North :banana:
Specifically, 2 x 3000+ 0517APAW
Bought them both, however now I have to hire an Inuit and a Moose to go pick them up (I wasn't kidding about them being UP North), and hand them to Purolator since the store doesn't ship :stick:
They are $156USD a pop, but with the added cost of these extreme shipping methods, it bumps it up to ~$190. About the price of a 3200+, still worth it IMO, I'm sure you all agree too.
Anyways, should be here in about a week, I'll keep you posted :D
By the way, if the first one I open does 2.7Ghz at 1.4V-1.5V, I'm not even going to open the second one, and offer it to you guys! :toast:
ygpm MACMAC :DQuote:
Originally Posted by MACMAC
You crack me up MACMAC :bounces:
OC'ers are a very funny breed, you could have bought a good week 20 to get the same results but then you/we would have missed out on the extremes we go to sometimes for a few (hopefully) more MHz :clap:
I would suffer many indignities for a few more MHz :DQuote:
Originally Posted by alpha0ne
Hehehe would'nt we all :toast:Quote:
Originally Posted by szukalski
No words, just pics :toast:
http://koti.mbnet.fi/dani69/DFI%20nF...ice%200517.jpg
http://koti.mbnet.fi/dani69/DFI%20nF...poChill_LS.jpg
Quote:
Originally Posted by Dani
:woot:
Jazzclub. NICE.
yeah whatever thats a vapochill i could do that too if i had one.
send me a vapo and ill prove it...
nice clocks though but thats past the max scaling point if im correct. but i may be wrong and probably am :\
let see some memory and cpu benches,, lets see what she does..
3000+ 0522 cphw box cooling on dfi.
2720 snm, sp2004 stable @ 1,57vcore
2803 super pi 1mb @ 1,63vcore
That typo screwed up my average computation quite good :DQuote:
Originally Posted by sobol
many thanks to MACMAC who sold me a new/boxed 3000+0517APAW :toast:
updates : 2.7ghz (300x9) @ 1.45v prime95 stable :D
hiya,
I've got a venice 0528 GPFW , when it hits 2700mhz , automatic reboot :(
I did get 33.5s superpi (no screen :@)
http://img33.imageshack.us/img33/9903/superpi33s0uc.jpg
quite dissapointed because this is the second time that I end up with a crap cpu.
Xyus
I was talking about the part of the desktop I could see... ;)Quote:
Originally Posted by Lestat
if you could add my results that would be cool......
http://valid.x86-secret.com/show_oc.php?id=35733
well I got sp32 stable. Check the RAM speed and voltage - love the Redline!
3200+ LBBLE 0515APAW
http://img.photobucket.com/albums/v4.../32M2900mz.jpg
Dont mind the SP32 time as I was multi-tasking :banana:
I also have this shot
http://img.photobucket.com/albums/v475/musk/3ghz.jpg
3Ghz baby!
well..... considering redline 4000 is 3.4v at 250mhz i have a little bit of an issue with you running 263mhz at MUCH less than rated stock voltages.
im curious how your running that ram on a divider also since its a known fact that the redline hates dividers.
LBBLE 0517APAW
http://200.26.26.43/oc/superi_01m18s844_cpuz.jpg
Edit: I updated the screenshot with my new mem settings.
wow i never knew the redlines didnt like dividers......Quote:
Originally Posted by Lestat
guess thats probably why im having so many issues with them @250mhz w/ the 5/6 divider......
funny though the mushkin peeps helping me tweak these never mentioned anything about them not liking dividers....
Hey, we have the same stepping! Any tips on how to get it stable at 306x9? Mine isn't stable if I go higher than 300HTT.Quote:
Originally Posted by Supertim0r
hit up the mushkin forums you'll see lots of stuff about the ram hating dividers
BUT its very possible they acti differently with different motherboards since everything likes to run like a friggin dream on those DFI baords maybe they handle a divider better on the DFI Ultra series all i know is from reading here, mushkin forums and from my own experience with the redline.
hell they wouldnt even boot for me runnign stock speeds on a divider,,, :/
and lucky you with that 3200 you got a rare one that does 3ghz unless your phase changing or vapochill..
i got a total crap cpu 0515 APAW LBBLE wont even rung 2.65ghz stable without 1.7v
and now it wont even run 2.55ghz stable i dont need really high volts it just wont run 2.55 anymore has to be 2.5 or less.
but my mobo is dieing also so that may be the cause of everything....
I will post some bandwidth shots if you like to show its running 263mhz.Quote:
Originally Posted by Lestat
I am a bit stunned myself. :confused:
This is good no?
Check here
No. Its insanely great! 2.9Ghz@1.4v and 265HTT tight timings 1:1 @3.24v - SuperPi 32M stable! :slobber:Quote:
Originally Posted by musk
THATS BEYOND INSANE MAN THATS IMPOSSIBLE.
oops caps sorry
3ghz at 1.4v no way impossible unless your running vapochill and even then i doubt 1.4v
3.24v @ 265mhz again not possible
and thats a pretty iffy Pi score for 2.9ghz and 2-2-2-6 263 (or is that about right ?)
frankly man your voltages give you away... the only way that ram could run that high is if its ddr550 chips and Mushkin put them into the redline 4000.
i mean seriously the ram is 3.4v @ 250mhz so you think he can run 263 at LESS then 3.4v ?
i dont mean to be the party pooper but come on now im not fooled.
how many 3ghz @ 1.4v chips have we ever seen ?
look at your 12v+ Rail what the heck is it running 12.8v for ?
that has to be making everything run overvolted... or something.
i just dont believe thats real.
if it is i humbly apologise.
gundamit -
your on a phase change with a 3000 winnie and you still had to go to 1.64v to hit 3ghz
i'd like to at least know your cooling system...
I would like to see a CPU-Z validation link since the odds of getting two miraculous performers between the CPU and memory are incalculable. Turn in another miracle on your video card performance and I think you qualify for XS sainthood. :p:
Quote:
Originally Posted by gundamit
hehehe well said !!
too bad cpu validation dont show cpu voltages so a validation dont mean anything really.
3ghz on a 3000 is possible, rare but possible. and definatley not on air.
air with 1.4v hell yes. god what a dream that would be.
im sorry i also missed the chip markings whats the date code and all those goodies.
your also playing online poker.... wow dude if your that lucky at online poker can i come be your best friend ?
ya my 3200 venice is def not very good....
even on phase it maxes out at 3120.......week 0518 is just not that good....
Hey! dont threat the 0518 CPU's!!! my 3000+ 0518 CPAW is doing a great job!
ON AIR WITH 1.625VOLT HE DID 2933MHZ! this week it will be with WC!
i'll post my results then ;)
This cpuz validatedQuote:
Originally Posted by Lestat
A little 1:1 to displace divider issues.
I don't know whats up with the 12v rail
http://img.photobucket.com/albums/v475/musk/1to1.jpg
lol hehehe "even on phase change its only 3120 lol like your disappointed.
sheesh even when supercooled a cpu can only go so far. lol
well musk if your truly running 3ghz @ 1.4v and 264mhz @ 3.24v you have the rarest cpu/ram combo i have ever seen.
just go behind your psu and turn down your 12v line a little those powerstreams are adjustable ya know.
wanna sell it ? lol im sure you dont need all that for online gambling lol.
My venice can do 3.02 Ghz on air but not nearly stable lol
I can run sp1mill at 3ghz but it needs high volts (1.58) and temps dont allow it to be safe. I think it's just my board reporting bad temps or something or bad IHS contact.
Cool. Now about that CPU speed ... how about a validation for 2.9ghz or higher. :)Quote:
Originally Posted by musk
0515APAWs are amazing CPUs. Mine did 2.70 Ghz stable on stock volts but hit a wall immediately after that... so they're amazing but weird CPUs ;P
my statement of "not on air" i guess was misstated.
yeah it could do it on air but not safely.
BUT since it is supposedly only 1.4v that would make temps just crazy low.
i still have my doubts about the ram and cpu both running so high with such low volts.
what the devil happens when you raise the voltages ?
seriously have you even raised the voltages yet ?
3500+ LBBLE 0517APOW - 2806 Mhz 1.47v XP90C prime stable
here you go. :D http://valid.x86-secret.com/show_oc?id=36658
hows thisQuote:
Originally Posted by gundamit
CPU-z ID = 36359
http://img.photobucket.com/albums/v4.../inprocess.jpg
I am in the midst of testing more voltage. The RAM definately needs mor volts to go above 265mhzQuote:
Originally Posted by Lestat
http://img.photobucket.com/albums/v475/musk/265at3.jpg
To get 270 32M stable I needed 3.57v
Will post more later. I am running prime now at 2900mhz/263mhz at 1.43vcore and 3.24vdimm - !/2 hour so far on Blend
just got a 0530 E6 Venice 3000+ today.
quick testing:
http://home.earthlink.net/~sgallai/images/a64e6.JPG
Also using a new motherboard - nf3 DFI
it SEEMS that its worse that my old venice 3200+ e3. but i have to see how it scales. seems that some cpus scale well some dont.
Quote:
Originally Posted by kapster
Kapster that is the same with all cpu's you could have 2 with identicle steppings and dates and one could just smoke the other one.
you also need to be sure that you have a bios that supports the E6 cpu's . i DOUBT it would cause a chip to not clock as well but it is possible.
also dont forget that the dfi board still has issues. Why ? god only knows they had a kick ass 754 board and a kick ass 939 NF4 board so why they had to go and mess it up with a goofy NF3 board i dont know.
do you still have your old board to test the cpu in ?
Musk.
i gotta tell you man if your legit. (frankly cpu-z validations dont mean squat to me since there is no voltages shown in cpu-z, why i dont know i do believe they need to add that.) Then you my friend are one lucky S.O.B.!!
and crank that mushkin up more you can run 3.8v on that stuff but thats the max id ever EVERgo and you better have a couple of fans blowing on the ram. and some nice cool case temps.
even right now with your current voltage settings i hope you have atleast 2 fans blowing on the ram. otherwise your gunna kill it from the heat .
Are you this lucky with your online poker endeavours ? lol.
I dont think i need to say anymore about my doubts im sure you can look thru the thread and see your chip is a one of a kind of one of a very very small handful.
and frankly ive never seen mushkin redline run that high on such low voltages.
ya never know you may want to NOT touch it lol. just let sleeping dogs lie.
Lestat,
I got my neo2 on the workbench still. I took a couple hours setting this all up because I also had to set up my watercooling.
ive heard plently of reports about the board being buggy. Im pretty sure I got an e6 bios out of the box as on post it says 1 CPU.
At this moment im experiencing cold boot problems when using the top 2 slots for dual channel. I had no problems with the bottom slots but it seems the top 2 overclock better.
Lestat,
I am pretty lucky at online poker. I have 12 million play bucks. :D
I am being careful with the Redline because I can't get much air flow to them. I have a Lanboy case and its pretty full with WC gear. I have a stock A64 fan blowing accross them and they are cool to the touch for now. I am trying to rig something up to get more airflow so I can crank the voltage. I am also noticing that my chip runs very stable up to 40c but after that it gets a bit flakey. I might have to put a good fan on the rad.
I am going to play for a couple days before I post anything else. Please give me suggestions of what you would like to see run as far as tests go.
kapster, thats interesting. and i mean very interesting.
so you have a brand new NEO2 that has a E6 bios in it ? thats pretty wierd.
and more odd is the 2 top slots work better. mostly the bottom 2 closest to the cpu work better, but in general thats a rule fo thumb for every motherboard.
Musk right now dont touch a damn thing
run prime95 today and tonight.. let it run dont even touch it. this is gunna "break in" the cpu.
Technically from every electrical and technical standpoint a piece of silicon can NOT be broken in . It's not a wear and tear item . It either does its job or it don't but a large faction of the overclocking world will tell you to break in the cpu so i pass that along to anyone i talk to.
leave everything the way it it and run 24hrs of prime 95 not the regular prime but the torture test.
what you could od is either setup prime95 for cpu only or ram only and then after 24hours switch to the other or run the mixed mode.
personally id do 24hrs of both.
then go ahead and raise the voltages up to 1.45 or 1.5v and see what happens.
if you had to go alot higher on the vdimm with the ram just to run 270 thats normal. but also remember that 95% of redoline users must run 2.6v or higher to get to 270, infact id say a good percentage of redline users cant even reach 270mhz.
so if you can reach 270 at less then 3.6v be happy!
lastly... you can not touch a thing.. .and just let it run for a week doing your normal everyday thing and then turn it up a little./
Me ? i run them for about a week and then turn them up.
but i also did that with this 3200 of mine and at first i though it was gunna be a good.
little by little i was able to get higher without rasing voltages.
but now im sliding back downhill.
i can no longer go over 2.5gh without the system crashing. and thats even at 1.7v. she just wont do it. so the chip is dieing.
and frankly im gunna crush it lol and then go get a 3000+ :D lol.
maybe just my addition to the 24h prime stable thread.
http://www.xtremesystems.org/forums/...59#post1028859
you misunderstood me there lestat. I was talking about the dfi nf3 board i got. i figured it has x2 support most likely e6 too?
the DFI bios page doesnt tell you anything about the bios itself. i really dont know if it has it. I am no newb to flashing bios but im hearing major headaches about flashing this dfi board.
Im going to play the waiting game on flashing. hoping for a really nice bios and having the modders go at it before i try one.
my neo2 is running 1.a which i know has e6 official support.
Looks like this 0530 3000+ e6 i got is topping out at 2.70ghz. pretty much exactly like my 3200+ e3.
mind you i even gave 1.7v at 2.8ghz but was not stable.
hey lestat i just noticed we have the same moniter & video card. i have to say im in love with widescreen gaming.
Note: 2680mhz failed at that voltage. 1 week old chip. returned so no further testing on it.
0530
Athlon 64 3500+ Venice (ABA3500DAABW / LBBWE 0530DPMW)
240x11=2640mhz
Cpu-z reads=1.552volts
Should be (under bios settings)=1.582volts
Bios reads=1.57v
10hour prime 95 stable (Large FFTS)
emm.. no one cares about venice anymore? first post: Last edited by sobol : 05-24-2005 kinda old.. i know collecting timings is boring, but can be very useful.. come on.. do something :stick: :)
Stepping and OC database isn't as important anymore because everyone knows how it is. Most of the new CPUs just suck but there's always some lucky ones that are pretty good. Doesn't seem to be any new week that does particularly good so few people are itnerested.
First, why this thread is not a sticky?
My 3200+Venice
Suicide
http://img382.imageshack.us/img382/6...hico3ow.th.jpg
spi Stable
http://img382.imageshack.us/img382/6...4spi5az.th.jpg
Stable
http://img382.imageshack.us/img382/8...able7pw.th.jpg
I forgot a little detail, the venice steping... :slapass:
It is a 520, but I dont remember the rest, not a "paw" at all.
SP2M means its stable? we have very different ideas of "Stable"
Anyway looks pretty good, what are the temps with that cooling?
Que bien que pudiste mejorar tu OC Silincer :clap: .
LeĆ:banana: en H4G que era el 3X :D , solo faltan buenas memos y sale :woot:
PDTA: tan wenos los shortcuts de PIPO :banana:
It's Great that you were able to improve your OC silencer.
I read at H4G that it was 3x, all that's needed here are good mems and :woot: .
Until Soon
Quote:
Originally Posted by kapster
yeah but i have HORRIBLE backlight bleeding and its even a rev A1 or 1A the ones it was supposedly fixed on. plus i cant stand the friggin rolling lines in games and the only way to fix it is with vsync on which isnt always the best thing to do sometimes especially when hitting lower frame rates. Triple buffering can fix this but it seems that nvidia is retarded enough to have triple buffering as an option but you enable it and close the control panel and it just disables itself again.
anyways
defiantely a nice 3200 you got there but i dont consider subzero cooling fair play. Air or water is fine cuz water typically isnt gunna get you below 30c.
reducing a cpu to -0 temps is just not playing fair. any cpu can go nuts like that. some go much higher than others but yours isnt THAT spectacular on subzero.
a bit of jealousy ? you damn right :toast: :slap:
how bout some engrish there El Whapo (joke from ages ago you gotta be old enough to get it no offense meant)Quote:
Que bien que pudiste mejorar tu OC Silincer .
LeĆ:banana: en H4G que era el 3X , solo faltan buenas memos y sale
PDTA: tan wenos los shrtcuts de PIPO
Until Soon
0520DPMW ?Quote:
Originally Posted by Ssilencer
Quote:
Originally Posted by Lestat
No problem men :toast:
Maybe :) , my 0520BPMW was and still is (sold now) an awesome clocker :toast:Quote:
Originally Posted by Supertim0r
Well, you can see the evap temp in the "G-froster control panel software" ;)Quote:
Originally Posted by Absolute_0
You are right, I forgot to add a prime running in that pic, I will in the future.
About -16c in proc, -44c in evap running prime at 3250, I have to fine tuning this single stage, it is overcharged.
Hey, a lot of people with widescreens lately, I have a 2405 and it's great.
Lanero
Mi hija ama a pipo! jejeje
Si, nunca habia escuchado eso de tener que poner en x2 para poder seguir subiendo.
English version
(Per Lestat request) :D
Lanero
My daughter loves Pipo!
Yeap, I'd never hear of anybody that had to lower the htt to 2x to get better clocks
http://krook.hobbyryss.se/krook/pict...rookmarked.jpg
3200+ LBBLE 0523 GPJW (VapoChill XE unmodded)
2863Mhz and a crappy SuperPI result cause of my crappy TwinMos Original pc3200.
Needs some more burnin too, that Vcore is a bit too high for me.
3000+ Cbble 0512 DPBW (max benchs/screen 3405mhz -> Cold Bug)
Superpi 1mo (not opti / win xp)
http://www.membres.lycos.fr/boblemag...dpbw/25.9s.jpg
god damn!
i hate you people! lol
nasty OC's on those 3000's awesome!!
you outa hear the AMD tech's talk about these 3000's they love them and agree they are almost a totally different cpu when it comes to overclocking and compared to the 3200's and higher which typically arent overclocking nearly as good.
ok just got my new 3200 venice today
got some different numbers from what i have seen around here
LBBWE 0528 UPAW
anyone seen the LBBWE before ? not me
waiting results ! :DQuote:
Originally Posted by Lestat
i guess its an E6 and the new E6 venice's suck i see... but ya never knowwww
the only way to know : testing :fact:Quote:
Originally Posted by Lestat
wont be able to that from work so ... wont know til late tonight or even sunday after i break her in for a few days.
I just upgraded from a 3200 Winchester which could do 2550mhz to a 3500+ Venice LBBLE 0521CPGW, just to find out that it too tops @ 2550mhz! :mad:
Not a single mhz more...
Is this normal for this stepping?
Could be the motherboard/ram if it tops out in the exact same spotQuote:
Originally Posted by JoeBar
ohhh look at this cpu-z dont know what the revision is
odd
http://valid.x86-secret.com/show_oc?id=39634
crap i called amd and they need the ADA number off the chip and i didnt write it down damn it!
LBBWE 0528 UPAW anyone have any idea why CPU-Z dont see the revision ?
its a turd anyways... 265 @ 1.55v and it wont hold 2.7ghz Pi @ 1.55 bah ggrrr
1,6v ?Quote:
Originally Posted by Lestat
i wanna see 2.8 and 2.9ghz @ 1.65 or 1.7v i dont like 1.7v but ill do it since im on water...
but that will never happen not with this chip
im checkin the memcontroller on it now .....
yup cpu is a turd no better than the last one still have to hit 1.7v to run stable at 2.7ghz
what a crock of crap... bah... im done im going back to intel i think
woah this chip definately does not like 1.7v lol instant pi failure
dropped it down to 1.65 and she seems to like that better... hhmm
still searching for info on what revision this chip is but i figure its just a E6 that cpu-z dont know about or something
1.65v @ 2.7ghz better than my last one but damn why are those 3000's such massive overclockers.
all in all 1.65v 2.7ghz isnt bad but god dang it cant i get one friggin decent cpu out of all the ones i been thru
this thing better loosen up in a week or 2
lestat, i bet you would've gotten a better OC if you had gone with a 3000+! Why do you stick to 3200s? If you're still looking around for good venices, pm me.
LBBWE are E6 (...BWBOX)Quote:
Originally Posted by Lestat
also, hello all
new to posting in these forums, though I have read them quite a bit
just scored a 0517 APAW locally from a system builder today, get it tomorrow
he had ONE 939 Venice 3000+ haha
can't wait to see what it can do :banana:
Welcome hawkeyefan, nice stepping you have there, just make sure you let everyone know how well the OCing goes :)Quote:
Originally Posted by hawkeyefan
Quote:
Originally Posted by alpha0ne
will do :up:
I got a 3200+ aswell, doesnt like anything over 2.6GHz, and even with 1.66V it still isnt stable. It does 2.4GHz on stock volts, but once I got over I need like 1.65V :shrug: :dammit:Quote:
Originally Posted by Absolute_0
I was told to get a 3200+ because it has higher multipliers... but that doesnt matter because 3200+'s overclock like :banana::banana::banana::banana:! :cussing:
It's a 0516FPAW 3200+. :shakes:
cpu-z wont read the revision as ive stated but Everest says its a DH-E6. so i gues thats settled.
just wonder why cpuz wont read it.
lol @ absolute. wth do i have to lose bro let's talk.
Venice rev.E6 LBBWE 0531 EPEW maxed 2.48Ghz 1.6v stable TR XP-120 cooler
damn i thought LBBWE 0528 UPAW was bad at 2.7ghz...
you gotta have something set wrong on your ram or other voltages.. no way that chip is THAT bad... i dont believe it.
but then again i think AMD might be getting a bit tired of replaced fried venice chips :\
Naked 0523CPAW (Taking off its clothes didn't matter much...if any)
2x512MB OCZ Value PC3200 (Winbond UTT BH) @ 2.9V craps out @ ~230 :(
DFI nF3 Ultra-D
Thermaltake BT
Prime/OCCT stable @ 276xMHz
http://img329.imageshack.us/img329/3532/spi6dx.th.jpg
@ 1.6V 2.8GHz may be possible with a better PSU and other MOBO (I don't trust the temp readings on this MOBO).
Quote:
Originally Posted by alpha0ne
hey all
took my 0517APAW for a test spin early this a.m. just very quickly.
looks like a decent one, but not overly fantastic (so far at least)
booted Windows 2600@stock (~1.345 actual)
booted/SP 1M 2700@~1.425
needed about 1.59v (actual) to complete 1M @ 2830
looks like it could go a bit furthur, waiting for better cooling to ship before I found out for sure.
currently Priming 2500@1.34v, 39load a little over two hours now
HUGE improvement over my Winnie so far! bastard needed ~1.587v to stabilize at 2.44ghz and auto-reboot at 2.62. Venice=same temps/Vcore under load and stock cooling=2.83ghz :banana:
FWIW, Cpu-z/MBM5/SpeedFan all report voltages ~.02 over what multimeter reports. the last screenshot is way off, under load CPu-Z reported 1.62v steady and Multimeter showed 1.595v. for some reason CPU-Z Vcore reporting tends to be all over the place until the CPU is under load, then it is steady.
this is almost the same results as my venice :p:Quote:
Originally Posted by hawkeyefan
LBBWE 0528APAW 3500+
I got a decent OC with my current specs, I just ordered a DFI NF4 Ultra-D board, GeiL One series TCCD 2x512 Kit, and a Zalman Restirator 1 Plus wc kit so maybe I'll be able to get more then I am currently...
HTT:240
Hammer Multi: 11x
Mhz: 2640ghz
HT=3x 16x16
Ram Timings=1:1 3-3-3-8 1t
Vcore: 1.65v
VDimm: 2.8v
Chipset: 1.6
Temps: 28c IDLE \ 45c full load (No IHS)
__________________________________
Zalman cnps7000-cb
BFG Nforce4 Ultra Mobo
Samsung TCCC 2x512 Dual-Channel Rated at 3-3-3-8 1t
Enermax 550w PSU 5v-36a 12v-36a
ATI Radeon x800xl PCI-E 256m cooled by a Zalman vf700-cu
SBLive 24bit PCI
WD 250gb SATA
WD 250gb IDE
Why isnt this a sticky yet?
cuz the new Venice E6 chips totally blow monkey nuts
My 3200+ E6 (sorry forgot to take photo, don't know the week) goes stable to 2550 MHz @ 1.55 volts. At 1.55 V there is no 2.6 GHz, I didn't try higher volts yet.Quote:
Originally Posted by 5days
This is in a DFI LP NF4 SLI-DR with a Zalman CF-7700-CU at full RPMs. BTW, I needed to flash to the newest BIOS to make the board behave with that chip.
I got the 3200+ because ewiz had it for $5 more than the 3000+.
I am not sure I am actually at 1.55 volts, monitoring reports 1.50-1.52. Need to do with voltmeter. Anybody knows where I put the voltmeter to measure this?
thats what im talking about
the E3 chips will run stock volts up to 2.5ghz and higher. usually not higher than 2.55 but its still stock volts.
all the E6's that i personally have seen and my own are just :banana::banana::banana::banana:,, they dont go past 2.6 stable.
im losing faith in AMD, truly i am. when you can go buy a Intel 630 775 for 180 bucks from new egg that does 4ghz and higher with no problem well... im almost ready to go back intel... out of 5 amd chips i ahve had 1 that was ok,,, thats all it was.. ok. 3200+ CG Clawhammer 754 chip did 2.5ghz on 1.55v but no higher even on water. and i wish i still had it cuz performance wise, i have yet to have a chip that performed better than that one did. that 1meg L2 really helps. in this day and age im shocked AMD and intel still makes cpu's which such a :banana::banana::banana::banana:ty L2 cahce of 512k its just rediculous and there wouldnt be any increase in production costs if they went all 1meg. the performance boost by doing so is something you can feel its just not a number.
Don't despair the new Opterons are kicking ass.....have a look at all the threads so far.......it's scary goodQuote:
Originally Posted by Lestat
Well, I won't lose faith in AMD just yet.
They gave me a 2.55 GHz AMD64 chip for $146. Intel charges me what for the same performance in my applications?
Just because they gave somebody else a 2.7 GHz chip for $135 doesm't make my new FreeBSD cruncher go away http://www.cons.org/smileys/smile.gif
sorry but in the post i havent'seen these step:
0520bpdw
iso good for a 3200+?!
because the 3000+ 0520bpdw is tested for 2600 MHz on air at 1.50-1.55 Vcore!
but this step 0520..i don't now..in this post there isn't any same of this!
sorry for my bad english :(
What exactly are you trying to say?Quote:
Originally Posted by Lestat