thats a nice total Speed against running FSB
those in the chart with that sort of FSB are only running
about 4ghz :)
Printable View
thats a nice total Speed against running FSB
those in the chart with that sort of FSB are only running
about 4ghz :)
Nice score Lardarse ! :toast:
Regards
Andy
Thx mates. The FSB is at the end of its journey with just stock Abit Orb on the NB. I wonder if I can get more room with NB chilling :D
Yes, nice Larsarse ---for an Intel:DQuote:
Originally posted by zakelwe
Nice score Lardarse ! :toast:
Regards
Andy
do guys get differnt results using hexus pi fast or super pi ?
I wish I can bench at 344 x 14 but its only stable enough for screenieQuote:
Originally posted by Tom Holck
Yes, nice Larsarse ---for an Intel:D
http://bravo.ausgamers.com/lardarse/lard/344fsb.JPG
:)
Hey Guys,Just wanted to get your opinions......
Any Good?:)
a little slow for the overall mhz speed. But its your RAM thats "bottlenecking" you... a faster divider and you speed should go around 1 or 2 sec. futher down :)
right;)Quote:
Originally posted by bias_hjorth
a little slow for the overall mhz speed. But its your RAM thats "bottlenecking" you... a faster divider and you speed should go around 1 or 2 sec. futher down :)
Can't do more than 250fsb 1:1, got this at 5:4.......
With better RAM you can take _at least_ 1 full sec. off. Low 47 must be possible :)Quote:
Originally posted by hallowen
Hey Guys,Just wanted to get your opinions......
Any Good?:)
Vatt's score:
http://www.xs4all.nl/~rvat/47_39.gif
I'd say, go for it :)
Btw: Kill all processes you can kill, turn off all eye candy, sit down on your knees and pray for a fast time :P Trust me, it works ;)
from my friend MickeyMouse :toast:
http://jason57.iwarp.com/fx513ghz/4022.JPG
Hmm, should I test some more Dry IceQuote:
Originally posted by zyx
thanks IamAnoobieCheez :toast: :toast:
2.880 with water?
http://www.xtremesystems.org/forums/...&postid=421149
254FSB*12 can give better time than yours:slobber:
Quote:
Originally posted by Boogotop
from my friend MickeyMouse :toast:
MickeyMouse alias ?? Alias ?? Poul 007 is Banned
I think he can post in other forums not here:mad:
What is your score, that is more interesting.
I don't think it's fair to use XS to post Pifast results from banned members. So they can get on the Pifast record-list.:stick:
sorry Tomdon't be mad at this
I believe he was banned for "hear say" imo.Quote:
Originally posted by Tom Holck
MickeyMouse alias ?? Alias ?? Poul 007 is Banned
I think he can post in other forums not here:mad:
What is your score, that is more interesting.
I don't think it's fair to use XS to post Pifast results from banned members. So they can get on the Pifast record-list.:stick:
Jason57570 / mickeymouse has helped me more than any other person i have talked to, on any forum.
At futuremarks he is looked up to :)
I have also had some good times with Jason/MickeyMouse/poul007 etc.Quote:
Originally posted by yuri
I believe he was banned for "hear say" imo.
Jason57570 / mickeymouse has helped me more than any other person i have talked to, on any forum.
At futuremarks he is looked up to :)
It's sad he is banned, but so it is..
Corsair Hydrocool'd results
http://www.fileshosts.com/pentium4/D....65/pifast.jpg
http://www.fileshosts.com/pentium4/D...PAT/pifast.jpg
banned or not, he just took it down hard Tom:D Almost identical cpu speed but almost a second faster:D
Ladies and Gents, here's the new WR from MickeyMouse aka jason57570:)
results up
/pmm
There's a duplicate entry (at different clock speeds)Quote:
Originally posted by PMM
results up
/pmm
MickeyMouse and Paul007 are one in the same person :)
impressive result from MickeyMouse
Wonder who's equipment he did that with.
At any rate, I bet Tom will be back soon. I think he like being the top PiFaster. :)
That's me rushing, totally aware who mickeymouse is and allQuote:
Originally posted by CodeRed
There's a duplicate entry (at different clock speeds)
MickeyMouse and Paul007 are one in the same person :)
his alises i've just forgot to remove think he even said in one
of his PMs to do so any way :lol:
Be corrected in a bit.
"Banned or not" nice result;)Quote:
Originally posted by QuadDamage
banned or not, he just took it down hard Tom:D Almost identical cpu speed but almost a second faster:D
Ladies and Gents, here's the new WR from MickeyMouse aka jason57570:)
The FSB , ramspeed really do the difference
:toast:
my old 39.44 was set with the "old" v 1.0 ram
The record was from 6.12.2003 almost close to 6 month
:slobber:
The New cascade 18"18" -115C load with my fx-53 and CorsairRE3500PTLL will run next weekend:D
I think you need an extra +100 FSB to hang on MM;)
Nice tom - Looking forward to se some super results :toast:
Hoping to se a dane at the top of Pifast.. again :banana:
Certainly a nice long stint at the top Tom :toast:
bl00dy fantastic TBH :)
Looking forward to next week or 2 :)
Place your bets now to how long he holds it for ;) can he
hold it for another 6months :stick:
That depends on how fast he gets iT.
If the chip runs 33xx/34xx then yes, he can! :D
I think he will get far, the FX-53 doesn´t
need that much vcore to run 3ghz..
:D
Quote:
Originally posted by JacobHansen
That depends on how fast he gets iT.
If the chip runs 33xx/34xx then yes, he can! :D
I think he will get far, the FX-53 doesn´t
need that much vcore to run 3ghz..
luckily most of the crasy japaneese dont bench PiFast ;)
new WR from MickeyMouse 38.27sec
http://jason57.iwarp.com/wrstuff/new%20wr.JPG
http://jason57.iwarp.com/wrstuff/26.JPG
http://jason57.iwarp.com/wrstuff/500.JPG
You know... Mickey can just send a screen-shot to PMM with his information over at the PiFast website. No need to post it here since we all know where to go for an updated score list.
Best I have been able to do with my P4 3.2C...
Asus P4C800-E Dlx
OCZ PC3200 Plat LE @ 2-2-2-7 @ 1:1
Got to finish the Mods Though...
Indeedy just add the URL to where its located into the commentsQuote:
Originally posted by Jeff
You know... Mickey can just send a screen-shot to PMM with his information over at the PiFast website. No need to post it here since we all know where to go for an updated score list.
box :)
And i'm working through the results now so it should be up before
the night is out which means in next 4hrs UK time zone :)
http://sivut.koti.soon.fi/macce/pics/hexpif.png
Abit AI7 with good (old) KHX3500 memory :banana:
Naturally DC and 1:1 with tight memory timings.
Hey guys
I have a feeling that people is getting more and more extreme lately.
Damn some fine macine you are posting!!
EDIT : MickeyMouse - Go home, and bench again, cuz in about 2 hours your rekord will not last.. :D
Yes, its time to get Pifast record back to Denmark. :DQuote:
Originally posted by JacobHansen
Hey guys
I have a feeling that people is getting more and more extreme lately.
Damn some fine macine you are posting!!
EDIT : MickeyMouse - Go home, and bench again, cuz in about 2 hours your rekord will not last.. :D
My new toy:cool:
100% stabil at this speed, fastest timings
New record, 36.84 :slobber:
But it is still the (old) Cascade "only" -112 C
windows 2003 server 64 bit OS
Yeah - Danish Dynamite again !!! :toast: Congrats mate.
Oh my god Tom H. has done it again :)
Congratulations!
Tom, please submit your score to the Dutch (international) PiFast site:
http://contests.mofoc.net
"MickeyMouse wants to say congrat's "
DoneQuote:
Originally posted by Thorry
Tom, please submit your score to the Dutch (international) PiFast site:
http://contests.mofoc.net
Thanks, give him my best regards:toast:Quote:
Originally posted by S_I_N
"MickeyMouse wants to say congrat's "
Thanx ;)
And jason just worked so hard to take the record. THey said you had gotten a 53 and were probably going to take the new lead.
Here is my best so far on air cooling:
http://users.adelphia.net/~youmansj/...0.73%20sec.jpg
Now thats just awesome! :D The clocks on that baby are sick my man ;)Quote:
Originally posted by Tom Holck
New record, 36.84 :slobber:
But it is still the (old) Cascade "only" -112 C
windows 2003 server 64 bit OS
GJ Tom, these newer FX's are amazing on clocks/volts compared to 754pin A64's
Nothing like Tom's, but I am happy to have finally broken the 50sec mark.
Here's my effort for the Barton party ;)
Oh man..another XP faster than me... :mad: SAE, I'll beat you :stick:Quote:
Originally posted by SAE
Here's my effort for the Barton party ;)
Nice clocks my friend ;) Maybe you should putt it on Ministry.
Done :thumbsup:Quote:
Originally posted by Fewture
Oh man..another XP faster than me... :mad: SAE, I'll beat you :stick:
Nice clocks my friend ;) Maybe you should putt it on Ministry.
Already have one at 47.13 :D
Gonna get better :) LOL Fewture's a$$ 's gonna be kicked ;)
Here's my new one :)
argh!
:p:
Insane time my man. Very nice!! I have a 3GHz Mobile now and 270Mhz BH-5.. Only need a mobo so you better start cranking now ;)
:toast:
I am not sure… this might be fastest result with Barton chip…??
http://www.vr-zone.com/ocdb/amd_scre...s/181iii.pjpeg
http://www.vr-zone.com/ocdb/amd_screenshots/181ii.pjpeg
Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2
Crazy stuff umekami! :toast:
Just Crazy :D
That CPU speed with a bit higher FSB would be a total killer!
Quote:
Originally posted by umekami10
I am not sure… this might be fastest result with Barton chip…??
Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2
that speed.......:eek: :eek: :eek: :eek: :slobber:
Not highest Mhz, but fastest PiFast I think. Very xtreme result my man :toast:Quote:
Originally posted by umekami10
I am not sure… this might be fastest result with Barton chip…??
http://www.vr-zone.com/ocdb/amd_scre...s/181iii.pjpeg
http://www.vr-zone.com/ocdb/amd_screenshots/181ii.pjpeg
Mobil Barton 2400+ AQYHA0413VPKM
2X256MB TwinMos TMD7608F8E50B
Abit nf2-s rev 2 Bios D10
Vcore:2.15 v
VDDR:3.1V
VDD :2.2V
Zelman 400W
Cooling:LN2
Hey Fewture :D ...But it's no 24/7 rig there ;) Ours are :cool:Quote:
Originally posted by Fewture
Not highest Mhz, but fastest PiFast I think. Very xtreme result my man :toast:
@umekami10
Sick clocks there :thumbsup: but with LN2 it's not that problem, isn't it ;) ?
Thanks everyone:)
Macci
There is no way to achieve higher FSB in this ABIT board…Multiplier 13.5 and 14 do not work…over 220 FSB… I can of course run 250MHz low multiplier(under 10)…but no use...
@SAEQuote:
Originally posted by SAE
.....But it's no 24/7 rig there ....
@umekami10
....... but with LN2 it's not that problem, isn't it ;) ?
I got that chip a few weeks ago and tried to test it with every possible “cooling means” I got.....
I found the following results:
2550-2600 MHz Air cool
2650-2700 MHz H20
3100-3150 MHz (modified prometiea)
3200-3300 MHZ Dry Ice
3400-3500 MHz LN2
By the way You are absolutely right about 24/7 :)
BUT:
First was testing then arose knowledge…
The best way to find out if it is problematical or not to use LN2 is to test it. I recommend you to try LN2 and tell us later what you finding…. :) :toast:
If you like the results of Dry Ice and Prometiea look at this page...
http://forum.sweclockers.com/showthr...ight=umekami10
Nice results anyway as I already said :D
What are your 24/7 settings and cooling (prom I assume?!)?
It's a shame this board cannot supply you with higher fsb... :(
(did you already try tictacs latest bioses, L12 mod etc?)
Mod the hell out of the board! Do the 3 in 1 mod. 240 is easily doable :)Quote:
Originally posted by umekami10
Thanks everyone:)
Macci
There is no way to achieve higher FSB in this ABIT board…Multiplier 13.5 and 14 do not work…over 220 FSB… I can of course run 250MHz low multiplier(under 10)…but no use...
@SAE
I got that chip a few weeks ago and tried to test it with every possible “cooling means” I got.....
I found the following results:
2550-2600 MHz Air cool
2650-2700 MHz H20
3100-3150 MHz (modified prometiea)
3200-3300 MHZ Dry Ice
3400-3500 MHz LN2
By the way You are absolutely right about 24/7 :)
BUT:
First was testing then arose knowledge…
The best way to find out if it is problematical or not to use LN2 is to test it. I recommend you to try LN2 and tell us later what you finding…. :) :toast:
If you like the results of Dry Ice and Prometiea look at this page...
http://forum.sweclockers.com/showthr...ight=umekami10
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
rude
seems a bit low score for the overall speed! Slow memory timings?
Memory is running at 2-2-2-5-11-16, if I put it like 2-2-2-5-7-16, it wont run above 240 mhz :mad:Quote:
Originally posted by rude
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
This is slow, I think that is just the new stepping, it goes higher, but performance is poor. LDT is 2X and tREF is 2x3120, I dont know about tREF, which one is fastest of those many options:confused:
I just tested PiFast a little for the first time, I have only tested with SuperPI before. I like it. :)
Tested with "low" CPU speed, I'll see if I can get any higher later. Will see if I can get sub-50s. :)
http://home.no.net/endreke/bilder/PC/PiFast_51.31.JPG
Setup in sig, that's air cooled 2400 35W, NF7 and TwinMOS BH-5@2-2-2-11.
I just looked at the ranking list... is this really the fastest air cooled Barton? Extreme air people, wake up! :D
Edit: From what I can see there is no one with none chilled water that's faster either. Hm... I'm not impressed by the water and air OC'ers. :)
Lookin'good m8. Crank it up and show us some 49ers :cool:Quote:
Originally posted by Endre
I just tested PiFast a little for the first time, I have only tested with SuperPI before. I like it. :)
Tested with "low" CPU speed, I'll see if I can get any higher later. Will see if I can get sub-50s. :)
http://home.no.net/endreke/bilder/PC/PiFast_51.31.JPG
Setup in sig, that's air cooled 2400 35W, NF7 and TwinMOS BH-5@2-2-2-11.
I just looked at the ranking list... is this really the fastest air cooled Barton? Extreme air people, wake up! :D
Edit: From what I can see there is no one with none chilled water that's faster either. Hm... I'm not impressed by the water and air OC'ers. :)
I'll see what I can do, although I only have an MCX462-V to cool with, and it's getting hot here now.Quote:
Originally posted by Fewture
Lookin'good m8. Crank it up and show us some 49ers :cool:
Which program do you guys get the higher CPU speed in, SuperPI or Pifast? I could do SupePI 1M up to 2815 or so last night... hope to get something like that later today in Pifast.
Saw at Ministry that HaLDoL has 50.43 with aircooled M2500. I'll try to beat that first. :)
:p: with 3-2-2-8
OCz EB stuff?
Improved a little... not 49 though, I need higher FSB. :(
http://home.no.net/endreke/bilder/PC/PiFast_50.50.JPG
yea but i dont have no means good unbuffering bandwidth.Quote:
Originally posted by zyx
:p: with 3-2-2-8
Just 2 more Mhz on FSB should do it.. Maybe talk nice to your rig? :p:Quote:
Originally posted by Endre
Improved a little... not 49 though, I need higher FSB. :(
http://home.no.net/endreke/bilder/PC/PiFast_50.50.JPG
LOL, well, I guess I'll try everything. :DQuote:
Originally posted by Fewture
Just 2 more Mhz on FSB should do it.. Maybe talk nice to your rig? :p:
OMG :slobber: on air 2.8Ghz, I gotta have me one of those :stick:
http://home.planet.nl/~dikke332/5158.jpg
I think I can reach 250 on the memory which is holding me back, but I'll need more than 3.5v on it... Maybe I will try 3.6 :D
Just have to turn up the VR on the 3.3 sense line I guess ;)
:D :thumbsup:
Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)
Still quite impressive... damn :slobber:
267x11.5 :slobber:
Very nice!
Maybe I'll g(e)t him, hehe ;)Quote:
Originally posted by Garrett
Fastest Socket A @ PiFast, eh 'Kumpel'? ;)
Whoops... seems not: umekami10 45.75 sec 3368 mhz memory 448 mhz Mobile Barton XP-M 2400+
Du hast noch was zu tun :D ;)
Still quite impressive... damn :slobber:
If I only could do 268 now. Maybe I'll go higher vdimm, am at 3.45V now... (but I am afraid the board won't do more)
P.S. Umekami has 300MHz more cpu clocks with the help of dryice :D
I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D
You should definitely try higher!!
Stable or not, the scores count!!!
It's not that I didn't have the voltages this high, I would run 3.5V 24/7 if it would gain me something... but it seems not with those nforce2 boards as they're limited by heat and other chipset internal features...Quote:
Originally posted by Garrett
I've had the vdimm @ 3.5v... on EPoX 8RDA+ :D
You should definitely try higher!!
Stable or not, the scores count!!!
P.S. Due to a short in vdimm mod I had aleady 3.88V there and it did not load windows (bluescreen) :D
Quote:
Originally posted by SAE
Good job :):toast:
Thanks umekami.Quote:
Originally posted by umekami10
Good job :):toast:
P.S. YGM :D
Ok.. I will post this one...
Asus P4C800-E Dlx (all mods)
P4C 2.8C M0 stepping
OCZ PC4200 EL (2x256Mb) @ 2.5-4-4-7 (3.25v Vdimm)
Cpu Cooled with Prometia Mach I (completely stock).
Enough is enough m8.. you make me look noobish :mad:Quote:
Originally posted by SAE
:D :thumbsup:
Got a small update :)
http://users.tpg.com.au/spark69/an50r/pifast41.20.jpg
gotta try a few more runs and see if I can crack that 41 sec barrier
Also a small update:
http://members.home.nl/youpy/a64prom6_small.jpg
nice one hag6br
mines close spec wise to your setup
2.8C SL6Z5 MO with SP94 + 92x38mm Sunon 120cfm fan
Asus P4C800-E rev1.02 1016 bios stock NO mods
2x 512MB OCZ PC4400 Performance Series DC kit @ 280mhz 3-4-4-7 at 2.85v vdimm
Win2k PRO SP4 OS
http://www.fileshosts.com/pentium4/D...-36/pifast.jpg
Hehe. Did not wanna make you sad ;) I like you Fewture and we have very similar systems... :thumbsup:Quote:
Originally posted by Fewture
Enough is enough m8.. you make me look noobish :mad:
I can go higher too :D
But it's not always stable, cr*p DFI LP :rolleyes:
Update :D
Try me :)Quote:
Originally posted by Endre
I'll see what I can do, although I only have an MCX462-V to cool with, and it's getting hot here now.
Which program do you guys get the higher CPU speed in, SuperPI or Pifast? I could do SupePI 1M up to 2815 or so last night... hope to get something like that later today in Pifast.
Saw at Ministry that HaLDoL has 50.43 with aircooled M2500. I'll try to beat that first. :)
nice cpu overclock, a bit more fsb and you'll go sub 50 in no time.
I did some tweaking, and I would at least have got you... but then, dead NF7. :(
But I'll get a Mach 1 now (around June 10), then I hope sub 50 won't be a problem. :) It's getting too hot for good results with air now, it will be a relieve.
A few more tweaks and I cracked that 41 sec barrrier :banana:
http://users.tpg.com.au/spark69/an50r/pifast40.80.jpg
Now whats it gonna take to break 40 sec with non-FX chip :D
Hi Cpulloverclock,Quote:
Originally posted by cpulloverclock
I have a job for u
try a
- 1M digits of PI and u'll get a 26s like Hideo
http://www012.upp.so-net.ne.jp/ohij2/2350-26.gif
- 8M digits (05'04 to beat) http://www.geocities.co.jp/SiliconV...fx/504-3199.gif
- cpumark (376 to beat)
http://www.coolaler.com/~coolale/3010_32mtop.gif
many challenges
now I have finaly done 24 sek i M1 as you can see in the SuperPi sektion.:banana:
What is the CPUmark record now?
Just done this:
3402 Mhz
Fast CPU speed but slow mem timings.
The SK8V sometimes make "jump" in multi/FSB
Nice, Tom :D
7.5sec faster than me, but I am the no.1 AXP in pifast, hehe...
I wonder what you're able to get with those S939 in the near future ;) (mem can go way faster then and that's what rocks pifast)
Little bit improvement with bios settings :p:Quote:
Originally posted by rude
Here is my quick test with slow CG-stepping
http://koti.mbnet.fi/rude1/Kuvat/A64/45.08.PNG
http://koti.mbnet.fi/rude1/Kuvat/A64/A64_43.94.PNG
Here's my best attempt thus far.
Very nice, Pkrew!Quote:
Originally posted by pkrew
Here's my best attempt thus far.
Thanks bud, looks like you're kicking some major butt there. Sweet scores :toast: