look really nice there Nashaz :up:
love the case, pretty small and simple, curious how 1x120 rad can fit in there :rolleyes:
what cpu block is that ? seems quite taller
btw nice DIY photo studio aswell (from reflection of first picture :yepp:)
Printable View
look really nice there Nashaz :up:
love the case, pretty small and simple, curious how 1x120 rad can fit in there :rolleyes:
what cpu block is that ? seems quite taller
btw nice DIY photo studio aswell (from reflection of first picture :yepp:)
Thanks mate!...Quote:
Originally Posted by anubis_is_evil
Ahahhaha... You got me there with the mini studio... :D
But as for the rad, its an 80mm though i would love to fit a 120 internally. The block is nothing special, one of those integrated pump/block units from a coolermaster aquagate unit i had lying around. Did not wish to spend too much on new wc components for this rig as most of the parts used were from what i had in storage. I know cm is rubbish, but for this rig, its able to serve it purpose. :)
Am keeping the cash saved for my gaming rig which is still under construction. That i will not hesitate to splurge on. :D
My pc after some changes(mobo rampage 2 extreme,intel x25m G2 180gb ,2x4890 vapor x with ek nickel waterblocks)
http://i842.photobucket.com/albums/z...s/DSC00011.jpg
http://i842.photobucket.com/albums/z...DSC00008-1.jpg
http://i842.photobucket.com/albums/z...s/DSC00009.jpg
I'm not exactly skilled at tube routing and my cable management is a dead loss,
but here is a couple of shots of where i am at just now:
http://msi-it.co.uk/r2e/fullfront1.jpg
http://msi-it.co.uk/r2e/gfx.jpg
http://msi-it.co.uk/r2e/pumps.jpg
90% finished...
http://www.abload.de/img/p1000681czk8.jpg
That color scheme is just awesome.
yeah blah lovely photo more pick dude
Nashez wheres the rad bro?:D That looks very clean! great job!
affiliate13 now thats confusing!
That looks pretty awesome man! :up:Quote:
Originally Posted by Blah123
Agreed with that.Quote:
Originally Posted by Origin_Unknown
Besides, the whole case seems to be ugly with those rads, especially with monsta (leet pwnzor oversized) rad...
My "almost" finished project :)
http://farm3.static.flickr.com/2621/...8d198026_o.jpg
Looks really sweet Ced!
Quote:
Originally Posted by Origin_Unknown
No arguments here, the tubes and cables need better managed.:)Quote:
Originally Posted by De5tr0yer
Lets call it a labour of love that isnt anywhere near done.
The third loop has caused much grief.:shakes:
Ill get more done as time wears on, for now i want to see it running again.:D
I know how you feel, have the exact same thinking right now as I am awaiting my M2F from ebay...Quote:
Originally Posted by affiliate13
Just had the case done and then POOF, tpowah died :D
Hope you will sort it out someday :)
Here is mine. Not even close to any of these setups but I am liking it so far. H50 is doing a good job. Just wish I could fit that fan in there for a push/pull setup on rad.
This is all inside a ATCS 840 that I cut a window on.
http://img515.imageshack.us/img515/37/1000881b.th.jpg
Extremely good work Kibbler :up:
That's a great shot kibbler.
Awesome job.
Nice looking case Kibbler!
Great shot Kibbler
What case is that?
Slap together assembly would lead me to think a Mountain Mod.Quote:
Originally Posted by dro
Thx mav2000, kwscore and De5tr0yer :)
More pics? Ok :D
http://www.abload.de/img/p1000692w1pf.jpg
http://www.abload.de/img/p1000662tg0l.jpg
http://www.abload.de/img/p1000661fc8g.jpg
Need a better camera, this one can't do crap in dim lighted areas.
http://img509.imageshack.us/img509/517/p1020344.jpg
http://img40.imageshack.us/img40/6441/p1020349d.jpg
http://img163.imageshack.us/img163/7441/p1020346.jpg
great job blah green color rulessssssss love it
New Stuff
http://img693.imageshack.us/img693/2...sy010forum.jpg
http://i287.photobucket.com/albums/l...g/2593c93f.jpg
testing casing.
now to mods.
That's very cool, bro cstkl1.:up:
I like it.
lol
now comes the tedious hard part
sleeving + acrylic mod to close off the mobo area from the rest.
looking for some ac ryan mesh grill for the area above the
idea is dont like the way other ppl did by closing off the area
in my case my gc's need air
so will use alu+acrylic+mesh.
Hey Friends, nice Pics here.
And now, here is my Q07
http://www.abload.de/img/102_0427lca7.jpg
Hey Case_Modder :welcome:
http://www.abload.de/img/p1000201q5cd.jpg
a link to a link of my current WC setup
http://www.xtremesystems.org/forums/...d.php?t=238272
please chéck it out and comment! in that thread :)
Well part of it, where's the rest? ; )Quote:
Originally Posted by Case_Modder
That is a nice organized build, I like it! What is the stuff on the back of the cards? :up:Quote:
Originally Posted by Blah123
Weevil, it looks like a sheet of carbon fiber. really nice looking system.
Indeed it is.Quote:
Originally Posted by mariop
Where would one get sheets carbon fiber?
@blah
thank you... nice System ;)
@weevil
Here is a pic with the complete Case
http://www.abload.de/img/102_0436fewx.jpg
http://www.abload.de/img/102_0438lc17.jpg
What are the specs of the system? I totally dig those small pcs :DQuote:
Originally Posted by Case_Modder
very nice :) :clap:
The specs of the system:Quote:
Originally Posted by De5tr0yer
Core 2 Duo 7300
Zotac Wifi 9300
MSI 9500 GT passive @Liquid AF Cooler
Samsung 500 GB
Laing
Black Ice GT SR1 Single
Yes, i think the same.:D
thank you :)Quote:
Originally Posted by syc
That is a cool little box, very nice :up: Did you cut the hole on top of yourself?Quote:
Originally Posted by Case_Modder
Thank you, it is nice to hear ;)
Yes the Top hole is selfmade and now a picture with sidepanel
http://www.abload.de/img/102_04498qou.jpg
The sidepanel hole is selfmade, too.
Just finished my latest P182 version. Not the prettiest, but I had fun modding it :)
http://i608.photobucket.com/albums/t...si/p182_v2.jpg
http://i608.photobucket.com/albums/t...i/p182_v22.jpg
Can you link me to the shop where you bought zotac? More detailed pics pretty please :)Quote:
Originally Posted by Case_Modder
Where did you place the power supply?Quote:
Originally Posted by laursi
Like the black and white scheme. :)
thats mcr320 so plenty of room for PSU in upright position behind it :) also HDD and D5 are stuffed in the lower chamber..Quote:
Originally Posted by De5tr0yer
IMO that mobo (and obviously those yellow wires) ruins the black and white thing, but got that p5q3 dlx for 40€ so I dont mind :rofl:
System Watercooler fully sponsored by DangerDen
And also Heatsink sponsored by Thermalright
http://img52.imageshack.us/img52/8291/pict7672.th.jpg
http://img691.imageshack.us/img691/1816/pict7808.th.jpg
looks nice ulysses, i see that is your first post several months after you joined, welcome !
How are you getting air through your radiator?Quote:
Originally Posted by UlyssesCazuquel
your pump doesnt like that position
http://www.laing.de/file/66
That only applies to the stock top wherein the inlet would be pointing downward, which is bad. His is fine. With aftermarket tops like his it's fine in any position except totally upside-down.Quote:
Originally Posted by Schlingel
http://img52.imageshack.us/img52/8291/pict7672.th.jpg
http://img691.imageshack.us/img691/1816/pict7808.th.jpg
Thanks Computurd.Quote:
Originally Posted by Computurd
Really is my first post but always I read the Xtremesystems forum because it is better :clap:
Thanks Weevil.Quote:
Originally Posted by Weevil
My system of the watercooler is Radiator - Pump - Block Chipset -Block Cpu - Reservoir
I need to do more performance tests and after post here for you
more initially the result is very good
Thanks Schlingel.Quote:
Originally Posted by Schlingel
I have contacts in Laing
After I send the photos to them asking for technical information on the position of the radiator
Thanks Kibbler.Quote:
Originally Posted by Kibbler
Old photo of my project showing the position and the radiator that was sent by xspc
XSPC 250mm Passive Aluminium Reservoir
http://www.xspc.biz/res250.php
http://img265.imageshack.us/img265/1...1651vt8.th.jpg
http://img340.imageshack.us/img340/5...5682ao8.th.jpg
The radiator is made of aluminum and I'm using the Feser One - Corrosion Blocker. The result against Corrosion is good?
Feser One - Corrosion Blocker
http://www.dangerden.com/store/feser...n-blocker.html
Antec p182
Swiftech GTZ
XSPC Single 5.25" Bay Res
Laing DCC w/ Alphacool top
XSPC RX360 Rad
http://img21.imageshack.us/img21/1076/dsc01034ei.th.jpg
http://img9.imageshack.us/img9/7417/dsc01043l.th.jpg
http://img97.imageshack.us/img97/9964/dsc01045h.th.jpg
http://img39.imageshack.us/img39/2148/dsc01053q.th.jpg
http://img39.imageshack.us/img39/7295/dsc01050n.th.jpg
Its work in progress right now, things to come are
Thinking about halving the radiator legs, they look too tall.
Fan Cable solution (atm have to run a 4pin out the rear to power zalman fan controller to radiator fans)http://www.overclockers.co.uk/showpr...tid=48&subcat= <- On its way
58xx GPU
Modular PSU
What PSU are you using and where is it?Quote:
Originally Posted by Case_Modder
@MALIK i love that ram watercooler...link?
prolly sidewards, like i did ... a while ago but I needed an extension 'cause I've had a pa20.2 sitting behind the psu ...Quote:
Originally Posted by laursi
http://i25.tinypic.com/nl4h2w.jpg
http://i25.tinypic.com/2dhgtup.jpg
als builded a new one, in a lian li V1000, need to take more pics
mcr 220 for gpu/moboloop is ordered, and also need to order an xspc rx240 for the cpu, 'cause it's now just running sweetly on a rs120 ^^
http://i38.tinypic.com/20ksza0.jpg
More pics in my theme or in my gallery. About ram block - this is custom made.Quote:
Originally Posted by Computurd
Here photo of all PC:
http://img3.abload.de/img/maliknewpcc9.jpg
Love the Shot Malik:clap:
Vey nice, Malik :up:
Amazing job! :up:Quote:
Originally Posted by Malik
I like your MB heatsinks. On the wall I mean haha.Quote:
Originally Posted by Oli4v
Just wanted to say you guys have some awesome rigs!! Here is mine below.
http://img526.imageshack.us/img526/440/dsc00503z.jpg
http://img42.imageshack.us/img42/1391/dsc00513u.jpg
http://img233.imageshack.us/img233/5995/dsc00515ac.jpg
Top case fan replaced with Antec blue LED Tricool 120mm fan.
http://img260.imageshack.us/img260/8642/dsc00532z.jpg
^^ Nicely done.
Just finished mine, any suggestions are welcome :D. Thanks
leghmoh
Nice WCing :up:
God Damm... that's sex in a PC Case.. ImpressiveQuote:
Originally Posted by Malik
Yes, it would take a lot of skill to fit both of them inside :ROTF:Quote:
Originally Posted by Darren1981
Thanks ;)Quote:
Originally Posted by Darren1981
Hi everyone this is my first attempt at watercooling so here is my rig ZoneX,i hope you like it. specs will be up soon.sorry for the crappy pics but was the best at the moment till i update them.
@Malik
Why isn't your tubing pushed on properly?
http://s4.postimage.org/t7iB0.jpg
Hello guys !!! Well some new photos of my rig. New reserv, new VGA and new modification :D
Hope you like it :D
http://img504.imageshack.us/img504/8168/dsc04965.th.jpg http://img30.imageshack.us/img30/4527/dsc04966w.th.jpg
http://img156.imageshack.us/img156/1...04967na.th.jpg http://img38.imageshack.us/img38/4121/dsc04968f.th.jpg
http://img39.imageshack.us/img39/184/dsc04969i.th.jpg http://img10.imageshack.us/img10/4839/dsc04970w.th.jpg
http://img30.imageshack.us/img30/2779/dsc04971d.th.jpg http://img39.imageshack.us/img39/121/dsc04972b.th.jpg
http://img130.imageshack.us/img130/5577/dsc04973.th.jpg http://img20.imageshack.us/img20/4616/dsc04974r.th.jpg
http://img682.imageshack.us/img682/5...c04975f.th.jpg http://img682.imageshack.us/img682/4...c04976b.th.jpg
http://img513.imageshack.us/img513/6...c04978l.th.jpg http://img40.imageshack.us/img40/2536/dsc04980k.th.jpg
http://img682.imageshack.us/img682/4...c04981k.th.jpg http://img248.imageshack.us/img248/4327/dsc04982.th.jpg
http://img94.imageshack.us/img94/8069/dsc04985s.th.jpg http://img94.imageshack.us/img94/8388/dsc04986d.th.jpg
@syc
what coolant is that ?
i love it !
@syc, awesome looking stacker dude, loving the 1/2" tygon and dark liquid.
Feser one black :)Quote:
Originally Posted by Malik[A]
Ty guys!
ey syc nice rig you got there! Congratulations ;)
There wasn't any problems with that Feser ? No gunk in blocks or flying in res?
HAF 932
http://farm3.static.flickr.com/2437/...a1c6efb3_b.jpg
i7 920 @ 3.6GHz ~65C (Prime95) with XSPC Delta V3, RS240, XSPC Dual Bay 750lph
[img]http://farm3.static.flickr.com/2772/4098441623_e97059a90a_b.jpg[img]
Powercolor 5870 LCS ~50C (Furmark 1.7), RS120, XSPC Single Bay Pump/Res
http://farm3.static.flickr.com/2573/...d3a75330_b.jpg
Looks like an EK nickel plated block
http://farm3.static.flickr.com/2757/...1496597b_b.jpg
These cards were easier to get hold of than air-cooled 5870s, only a few in the UK AFAIK and I think we have them all.
http://farm3.static.flickr.com/2772/...7059a90a_b.jpg
USFORCES, how could you possibly do any work at that desk? You must spend all your time staring at your rig!
I have always wanted to do that! If only you had a build log.... hrm....
nice rigs all around guys!
and gals!
USFORCES that's awesome, i regret buying a new case now, should have just bought a desk lol
Internals to messy and dirty to show right now :P
http://i295.photobucket.com/albums/m...2/DSC00325.jpg
http://i295.photobucket.com/albums/m...2/DSC00326.jpg
No. It is a very good thing. It has good cooling properties and it looks nice :)Quote:
Originally Posted by Malik[A]
But! Don't touch it, always work with gloves :) It's worse than ink :)
That is sa-weeeeet! :up:Quote:
Originally Posted by USFORCES
USFORCES
Outstanding work, man :up:
Ya man, love the look of the desk!Quote:
Originally Posted by WaterFlex
Thank you guys!!
I love that desk, so awesome.
Did a bit of mucking around with my case, mounted my spare MCR220 at the front of my case.
http://i240.photobucket.com/albums/f...r575/003-3.jpg
wow that is awesomeQuote:
Originally Posted by USFORCES
Old gear in new case, and water cooled.
http://i970.photobucket.com/albums/a...g?t=1258221584
http://i970.photobucket.com/albums/a...g?t=1258221693
Hard to see with my crappy camera skills, but there's a piece of purple glass in the bottom of the case, matched with purple noise blocker fans, now I just need some purple water.
nothing special bought new tubing
http://img517.imageshack.us/img517/2121/p1100006.jpg
http://img197.imageshack.us/img197/6144/p1100011b.jpg
Finally got my extra 120mm rad in, and a good oportunity for a rebuild.
Decided on a few improvements to what is basically my first w/c rig.
Installed a coolant temperature sensor, flushed and swapped coolant (the cheap anti-freeze I was using was nasty stuff and started to clog up my CPU block)
Now I got some Fezer pink and some UV anti kink stuff which has kinda pimped it up a bit, but not nearly like the meticulous work of some of these people!
Decided to remove the cumbersome M2F heatsink assembly to get lower nb temps, and it seems to have worked well, although this is at hte cost of slightly higher nb temps. I'm thinking of getting another fan for the other side of the internal radiator which might help the air get past it a bit better. All in all the layout seems to work well. The only niggle is intaking air via the smaller rad which might bump up temps a touch.
http://i194.photobucket.com/albums/z...DSCF0670-1.jpghttp://i194.photobucket.com/albums/z...h_DSCF0713.jpghttp://i194.photobucket.com/albums/z...h_DSCF0719.jpghttp://i194.photobucket.com/albums/z...h_DSCF0699.jpghttp://i194.photobucket.com/albums/z...h_DSCF0711.jpg
@Weevil: Nice Blue Ring! Ive got the same case but never thought of water cooling:rolleyes:
You put your DVD drive into the lowest slot to make the top radiator fit, right?!
Exactly, and it left just enough room on top for the HD, the DVD drive actually sits right on top of the bottom radiator.Quote:
Originally Posted by .raw
Was a fun project, I love this case.
Love it too, mine even is powdercoated black:D:p:
http://img211.imageshack.us/img211/9371/dsc0651d.jpg
http://img402.imageshack.us/img402/3200/dsc0395g.jpg
http://img402.imageshack.us/img402/6218/dsc0410p.jpg
http://img689.imageshack.us/img689/3092/dsc0649v.jpg
http://img402.imageshack.us/img402/3632/dsc0399e.jpg
http://img402.imageshack.us/img402/787/dsc0413x.jpg