How "Xtreme" are you?? Post Pics of your System, and show us.

Side panel number 1


http://img410.imageshack.us/img410/8...onview14dh.jpg

http://img410.imageshack.us/img410/4905/dragon35fj.jpg

http://img346.imageshack.us/img346/8...onview29rf.jpg


The next one will be here on Monday or Tuesday, even cooler looking than this one.

More cleaned up pics
http://img145.imageshack.us/img145/4678/dsc02584oj4.jpg

http://img145.imageshack.us/img145/9633/dsc02595es3.jpg

http://img145.imageshack.us/img145/993/dsc02586ps7.jpg

http://img145.imageshack.us/img145/4019/dsc02590kn3.jpg

Let me know watcha think. Oh and I also added 3 120mm deltas on top (151cfm) and a suitable fan controller of course :D

My second 7800gtx will arrive Monday too

If you want to see my REAL extreme rig though...check it out

http://img147.imageshack.us/img147/5980/dsc02572be5.jpg

http://img147.imageshack.us/img147/9025/dsc02579yg9.jpg

Wow. Some really nice rigs on here.

Here's what I got, not much to some, but it took me forever to get all the cabling hidden. I have also been told it's grown quite, ugly.....but I cannot afford to finnish it atm, so ugly it stays.

I took out the UV lights, just too crowded...
http://www.nelp.net/slayer/comp/water/glow2.jpg
http://www.nelp.net/slayer/comp/water/lcd1.jpg
http://www.nelp.net/slayer/comp/water/lcd2.jpg

Experimenting on different shroud setups atm, used foam to fill gaps.
http://www.nelp.net/slayer/comp/water/shroud1.jpg

Quote:

---

Originally Posted by JME F1delity

http://img89.imageshack.us/img89/702...onsmall1vq.jpg


http://img89.imageshack.us/img89/154...llsmall0ln.jpg

http://img89.imageshack.us/img89/351...rksmall7uc.jpg

---

Nice Setup!!!

Mine is close..

61.8ƒ to 69.5ƒ avg. for room temps w/ 13,000BTU

• VTF-3 MK 2 12" 700watt HSU Subwoofer that I have set to play at 20hz
• Harmon Kardon AVR 430 7.1 910watt Receiver
• JBL E20 Northridge series Speakers that are used for Left and Right Fronts and Rears.
• Infinity Primus C25 Center Channel Speaker

Video of Setup...
http://img477.imageshack.us/img477/724/room0wp.jpg
http://img154.imageshack.us/img154/586/newside0wq.jpg
http://img154.imageshack.us/img154/120/newfront6qd.jpg
http://img142.imageshack.us/img142/3...ide29sg8fz.jpg
http://img224.imageshack.us/img224/3...linopen8ec.jpg
http://img224.imageshack.us/img224/3954/top5jy.jpg
http://img134.imageshack.us/img134/9700/side9cy.jpg

Lights off:
http://koti.mbnet.fi/nazu/Kone/Kone/kone1.jpg
Lights on:
http://koti.mbnet.fi/nazu/Kone/Kone/kone2.jpg
Case:
http://koti.mbnet.fi/nazu/Kone/Kone/koppa1.jpg
Internal:
http://koti.mbnet.fi/nazu/Kone/Kone/sisukset.jpg

http://i38.photobucket.com/albums/e1...4/01010027.jpg
http://i38.photobucket.com/albums/e1...01290004-1.jpg
http://i38.photobucket.com/albums/e1...01290003-1.jpg
http://i38.photobucket.com/albums/e1...01030001-2.jpg
http://i38.photobucket.com/albums/e1...4/01010030.jpg

http://i74.photobucket.com/albums/i2...o/DSCN0049.jpg

ok heres my CF setup for LN2 and DI :)
http://bandwidth.se/imgs/nouser/3f6d22cafire-riggad.jpg
http://bandwidth.se/imgs/nouser/41d7db16test1.jpg
http://bandwidth.se/imgs/nouser/45c332e9test2.jpg
http://bandwidth.se/imgs/nouser/4f9c1d3etest.jpg
and after benching to set the rig to de freeze ;) alittle frost i think but it worked..
http://bandwidth.se/imgs/nouser/3fcfdcc3fruset.jpg
and after all frost it's time to dry it in the oven :D
http://bandwidth.se/imgs/nouser/3c188556k-o-halster.jpg
Temp in oven in C+
http://bandwidth.se/imgs/nouser/533f494ctemp-i-ugn.jpg

woah chefnr1 thats some cold gfx cards

Quote:

---

Originally Posted by Origin_Unknown

woah chefnr1 thats some cold gfx cards

---

haha yes and the funny is that they work like that too :)

wow, i would of never of thought that they work would with that much frost.

Quote:

---

Originally Posted by lowfat

wow, i would of never of thought that they work would with that much frost.

---

Same here. Although I guess with all that frost on there you know that it isn't overheating :p:

well it's good protected the whole pcb except the core is all coverd with vaseline before i mount for that cold bench so even if it melt and drip down it's no danger it's like pissing on a goose it just dont get wet at all. and i must say that my MB is coverd to with vaseline so no shortcut here and i dont have no shortcut yet :)

My case
http://i145.photobucket.com/albums/r...dder/duct2.jpghttp://i145.photobucket.com/albums/r...er/Picture.jpg

pics of my now retired agp system \|/ \|/
http://i145.photobucket.com/albums/r...manMod2-09.jpg

http://i145.photobucket.com/albums/r...manMod2-05.jpg

http://i145.photobucket.com/albums/r...manMod2-04.jpg

http://i145.photobucket.com/albums/r...manMod2-02.jpg

here is my sli system i just put together the other night, over clocked from x2 3800+ 939 2.01GHz to 2.691GHz
http://i145.photobucket.com/albums/r...anmodder/2.png

and here is my agp system temps just before i put my sli setup together

and yes, this is 100% air-cooled (active.. meaning i use case fans of course.. passive is a system with no fans at all)
http://i145.photobucket.com/albums/r...lshipsenso.jpg

Huh? Do you have a friggin tube running through the center of your heatsink? Thats amazing. Also, is that an ac unit coming from the wall into the back?

actually the tube is supposed to hooked to my ac/heating unit.. but it blows the right side of the house out. so, i just used what my rental agency did and used it to my advantage. the duct is actually the exhaust port for the ac/heating unit, but now it is my intake. it goes directly outside

the ac/heating unit is cool though for its accesories. http://www.pelonis.com/exhaust.jpg

hear is the actually unit the now sits off to the side and collects dust
http://www.pelonis.com/port_ac.jpg

Okay well I am not XTREME expert........but I will post these and you all can decide :-P.

Pics courtesy of Philly_boy.
My two 8800 GTS with IHS removed AND they work great.

Call it xtreme insanity, stupidity etc, the cards work, my temps are awsome E load that is what matters.

My mobo is on RMA so no system Photo right now.
http://i38.photobucket.com/albums/e1...7/TSBF-010.jpg

http://i38.photobucket.com/albums/e1...7/TSBF-009.jpg

purrrrrrrdy. i love the look of shiny new copper :D

http://www.click2host.us/001/1299219.jpg

http://www.click2host.us/006/2892274.jpg

AMD Athlon 4000+ @ 2.7 GHz with thermeltake Venus HSF and arctic 5
2 GB RAM (GB G SKill and GB generic)
ASUS A8N5X 939 Mobo
Antec Smartpower 2.0 500W
Western Digital 250 GB 7200 RPM HD
Sony CD/DVD Combo Drive
XFX GeForce 7900GS XXX Edition @ 600/1,600 MHz
APEVIA X-CRUISER Case

Top 3dmark 05 score is 9419