It's only good for 05 3d wise, and a little behind the times on that now also.
Printable View
Confused,
Compare again ;)
http://www.hwbot.org/community/submi...70_51022_marks Linux's fastest 05 run? 570
http://www.hwbot.org/community/submi...80_51049_marks Sandy sucks....... 580 wrong os no tweaks crap settings
http://www.hwbot.org/community/submi...80_52063_marks Gulftown........ 480 on air less clocks than all card wise no tweaks crap settings
I might add that theres a little more self satisfaction from doing results with gulftown, after all my grandmother can't beat me on gulfy.......sandy well thats a diff story ;)
:rofl:
I am looking forward to seeing your 6.0ghz run with high uncore with the 980x+580 so we can get a better comparison...
LN2 on the GPU doesn't help much...
I didn't get a good score with a 580 yet as you see... I think I could manage 52k but after that I'm pretty limited by my 5.600ghz CPU...
Zen's 5.8ghz SB compared to your 980x full blast would be interesting :yepp:
Nah 5.8 would catch my gulfy, I'd lay money on that.
There is only so much you can do after that your at the mercy of shear clocks.
To explain further here's a score breakdown.....
Your score steve.
GT1 181.5 mostly system based performance
GT2 135.2 GPU + driver + clocks + LOD
GT3 374.1 <----gpu clock + LOD
My score on gulfy No lod no tweaks lesser card lesser clocks makes GT2 + 3 pointless to compare so
GT1 187.1 without maxxed out settings.
That about sums it up for me, it's really all about understanding score breakdown.
Then I need to account for the fact that of the 2 boards worth benching I have both have nf200 latency hits which most people forget to take into consideration when comparing effec ;)
So I have both UD4 and UD7, all things equal UD4 should score higher due to no nf200?
In the noise or something significant?
Also - "after all my grandmother can't beat me on gulfy" - I am male and not a grandparent (yet). :)
Mr Chew - The good Linux score with Sandy is yet to come, he posted a trial run last night - my confusion - not 05 but in 03 - my bad.
Yep had 30min so decided to do a session and knock out a quick run... ran GPU up with the max volts I have in Inspector(1.21v) and did three runs last one pushed temps down to -160oC no problems. After that run I checked and the GPU runs down to -180oC, almost CB free. :up:
Gotta get Afterburner working so I can add a little more voltage and I think 1200 core will be easy with this card.
BTW guys just tested Heaven with LN2 and got a horrible score, but on air now and finally found my performance issue. Will do LN2 again in an hour or so. :D
Just got X1752 with 943/1149mhz and 2600K@stock :up:
No I meant it seriously, not directed at anyone in particular.
It's not hard to jack a multi and voltage......Quite frankly except for like 2 benches thats 95% of a result on sandy.
Nf200 has a latency hit bottom line, it always cost something performance wise with single card.
Looks like I can't afford to bench for a while...........
Was woken up at 3 am by police to ask us where our car was..........
Our reply well we hope it's outside......
Nope it's in Cranston stuck to another car was the officers reply...
It appears some kids stole it last night and crashed it got caught and are walking the streets already......they better hope I don't find out who they are.....
Anyway, I can't afford a car right now nor benching, Insurance was just liability and uninsured motorist ( must have in R.I. ) so I'm preety screwed.....
I could fix it but not worth it......I paid 1300 ( cheap ) becasue it needed a front frame welded in......it appears it needs the same frame + everything else now.....cost would be more than i paid for car including air bags, dashboard, and windshield..........
Sucks as that was my transportation to work, can't get to work now and in my line of business a bus is out of question.......I drive truck on short notice and usually have to be there with no heads up in 10min to drive a truck.........
Hard to buy a new car when you can't work......:shakes:
That sucks Brian. Sorry to hear this man :(
Had poor luck today myself. Employer refused to put me on the books for the last two months since I started.
Owner started shorting my pay only giving me 40 hours pay when Id work near 50 some weeks.
So I told him I would be needing to take a day off mid week in order to stay at 40 hours and get paid for my work.
Seems like a fair concept right?:shrug::rolleyes:
Fired and out of a job again. I'll have some time to bench but only the stuff I have already and will likely need to sell off soon.
I love my hardware:(
Sorry to hear Brian AND Slaveondope :down:
I think my problems are slightly different.........
Judging from the tow yard it seems maximas are a popular car to steal........4 cars in yard.....all maximas.....
Both involved stealing.....
Maximas are popular to steal because they aren't difficult to get into.
Maybe you can buy two of them from the lot and put together one decent ride:shrug:
I'll be drinking some whiskey tonight, what are you having chew?:toast2:
We should start a Chew* fund... $30 and 50 people... back on some wheels and back to work...
And back to benching... :D
Hope you figure something out man! :up:
Hanging with some old friends tonight ( the kind that have a rep ) doing a little research.....If i drink someone would be dead, best if i stay sober ;)
Feeling like a little street justice. Someone caved in the front nose of my car so I'm feeling like caving in there face, nice thing is word on streets travel fast, kids these days brag when they do :banana::banana::banana::banana:, not like the oldschool guys who if they did :banana::banana::banana::banana: no one would ever know.
As far as being same it's really not.
Back in the day someone stole your "ride" which way back was a horse it was a hanging offense.
However if they robbed you it was just jailtime.
Losing your job or money, you still have wheels to get another job.
I no longer have the wheels to get to a job I already have.
Sucks to hear the news. Hope both of you get things resolved sooner rather than later.:)
Moved my chillers out of the closet and onto a cart.
Insulated the chillers, res and tubing.
Insulated the block after these shots :)
http://img40.imageshack.us/img40/888/dsc04057c.jpg
http://img96.imageshack.us/img96/9982/dsc04051hh.jpg
http://img850.imageshack.us/img850/1623/dsc04055d.jpg
http://img215.imageshack.us/img215/7305/dsc04054y.jpg
VVV Tried to cool the 580 with regular water ice – no go – ice melted before I could get thu one successful heaven run. :( Need dice! :)
http://img820.imageshack.us/img820/9858/dsc04060s.jpg
Chew and Slave - just read your posts - sorry to hear (see!) that!
Chew - you have pm sir.
Love the pictures Steve!
Ran out of ice before a heaven run :ROTF:
Go for DICE! :up: