The Official Opteron 939 Overclocking Thread

Printable View

Show 100 post(s) from this thread on one page

11-21-2005, 08:46 AM
Zeus

Isn't SP2004 just StressPrime?
I think the difference is just the skin, underneath it's just Prime95 but it might be an older version.
11-21-2005, 09:08 AM
Rufus7

Yeah a very old Version. It does not Stress really the new A64 CPUs.
11-21-2005, 09:20 AM
Dani

Quote:

Originally Posted by Rufus7

Sorry but SP2004 is not the best Stabilitytest.
If you want to go sure then use Prime95 version 24.14!
And make the Test Custom FFTS in place changing every 15 Minutes. (8-4096).
Thats the ultimative Stabilitytest for the CPU!!!!!!!!

It's just stable for me and my games/programs :fact:
11-21-2005, 09:27 AM
tatts

Quote:

Originally Posted by Zeus

Isn't SP2004 just StressPrime?
I think the difference is just the skin, underneath it's just Prime95 but it might be an older version.

just what i thought
11-21-2005, 10:20 AM
Mr.President

so in a few minutes my new 0540 FPBW arrives. Perhaps i can beat my personal best 3250 occt with the previous :) all WC
11-21-2005, 12:16 PM
Wiker

How high do you guys think it is possible to reach with a 146 CABYE FPMW and DFI nf4 lanparty cooling Prometeia MACH II? That´s my new rig. Mach II arrives on sunday and DFI mobo in a week or so
11-21-2005, 01:44 PM
TEDY

at least 3.3 ;)
11-21-2005, 03:11 PM
UFgatorSean

If i currently Have an X2 3800 installed, will i need to reinstall windows to play with my new opty, or should it be okay to just swap them out?

TIA
11-21-2005, 03:12 PM
tatts

if its only a cpu swap then youll have no problems ;)
11-21-2005, 03:34 PM
UFgatorSean

Quote:

Originally Posted by tatts

if its only a cpu swap then youll have no problems ;)

Ya, i was just worried the dual core optimizations/drivers might cause a conflict, but i'll try it out!

I am so excited about my CABYE 0540FPAW! I am hunting for 3.1-3.2 with my shilled setup.

Only question now is to remover the IHS or not before i "de-virginize" it :P
11-21-2005, 06:22 PM
D4nnyOcean

Quote:

Originally Posted by UFgatorSean

Ya, i was just worried the dual core optimizations/drivers might cause a conflict, but i'll try it out!

I am so excited about my CABYE 0540FPAW! I am hunting for 3.1-3.2 with my shilled setup.

Only question now is to remover the IHS or not before i "de-virginize" it :P

I just removed one on my 146 CABYE 0536GPMW. Load temps of 53C on Water with a Swiftech Storm had me pissed so off it came.

Load temps dropped 14C to 39C with 1.55v @ 2800MHz.

Be very carefull using the razor blade. I found it much easier to slide the razor blade under the IHS at a corner, more like just pushing it under the IHS. But take care not to slide blade in to far. There are some circuits in there that can be damaged. Just take a look at one some has posted with the IHS off and you will see what I mean.

I'm sure someone else has posted this in this thread before but here it is again. A short movie on the removal. This fella used a razor and a screw driver to pry the IHS off. I didn't like the idea of twisting a blade under the IHS so I just used the razor to cut the sealing material but either will work.

IHS Removal

Good luck!
11-21-2005, 06:58 PM
dogsx2

Quote:

Originally Posted by D4nnyOcean

I just removed one on my 146 CABYE 0536GPMW. Load temps of 53C on Water with a Swiftech Storm had me pissed so off it came.

Load temps dropped 14C to 39C with 1.55v @ 2800MHz.

Be very carefull using the razor blade. I found it much easier to slide the razor blade under the IHS at a corner, more like just pushing it under the IHS. But take care not to slide blade in to far. There are some circuits in there that can be damaged. Just take a look at one some has posted with the IHS off and you will see what I mean.

I'm sure someone else has posted this in this thread before but here it is again. A short movie on the removal. This fella used a razor and a screw driver to pry the IHS off. I didn't like the idea of twisting a blade under the IHS so I just used the razor to cut the sealing material but either will work.

IHS Removal

Good luck!

Not a very good video :(
11-21-2005, 07:33 PM
UFgatorSean

LOL! I was suprised not to see a bloody niblet of finger wrapped in a towel after that!
11-21-2005, 11:07 PM
TEDY

Quote:

Originally Posted by D4nnyOcean

I just removed one on my 146 CABYE 0536GPMW. Load temps of 53C on Water with a Swiftech Storm had me pissed so off it came.

Load temps dropped 14C to 39C with 1.55v @ 2800MHz.

Be very carefull using the razor blade. I found it much easier to slide the razor blade under the IHS at a corner, more like just pushing it under the IHS. But take care not to slide blade in to far. There are some circuits in there that can be damaged. Just take a look at one some has posted with the IHS off and you will see what I mean.

I'm sure someone else has posted this in this thread before but here it is again. A short movie on the removal. This fella used a razor and a screw driver to pry the IHS off. I didn't like the idea of twisting a blade under the IHS so I just used the razor to cut the sealing material but either will work.

IHS Removal

Good luck!

GPMW ?
11-21-2005, 11:14 PM
coop

3100..for today :) [IMG]http://img292.imageshack.us/img292/2...31230026nn.jpg[/IMG]
11-22-2005, 12:00 AM
Dani

Quote:

Originally Posted by Rufus7

Sorry but SP2004 is not the best Stabilitytest.
If you want to go sure then use Prime95 version 24.14!
And make the Test Custom FFTS in place changing every 15 Minutes. (8-4096).
Thats the ultimative Stabilitytest for the CPU!!!!!!!!

@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D
11-22-2005, 12:13 AM
Rufus7

So and thats running still yesterday here on my 170 0536MPMW. Ambient Temps between 17-18,5°C.

http://www.bilder-hosting.de/uploads/d4766a9f96.jpg
11-22-2005, 12:17 AM
alpha0ne

Quote:

Originally Posted by Dani

@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D

There is always some dissent as to what is deemed to be an acceptable proggy to show 100% torture stability (mainly by those who's systems are not 100% using Prime95 v24.14 :rolleyes: )

You have a marvellous chip there Dani if you can run Prime v24.14 @ over 3.1Gigs :fact: :clap: , definately a keeper :)
11-22-2005, 12:41 AM
Rufus7

Quote:

Originally Posted by Dani

@Rufus7, im now on Prime95 v24.14 and Custom FFTS in place changing every 15 Minutes. (8-4096)
+8h and running with 3103MHz 1.5V 23ºC ambient AIR, nothing special with Prime :D

But your first Screen at 3,1Gig and 1,5Vcore under Air is interesting.

I have an Ambient between 17,5°C und 18,5°C but you Chipset at higher Ambient is lower than mine.
And i have the original DFI Northbridgecooler on Board.
Yours must be modded or under water or your Ambient is below 15°C.
11-22-2005, 02:28 AM
TheMooN

I Would appreciate results from anyone running a 148 CABYE 0543 FPMW :) .

I won't be able to stick any juice through mine for a couple of days and I am curious as to what this stepping can/could do .

Cheers !
11-22-2005, 02:34 AM
tatts

Quote:

Originally Posted by Rufus7

So and thats running still yesterday here on my 170 0536MPMW. Ambient Temps between 17-18,5°C.

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:
11-22-2005, 02:48 AM
gundamit

Quote:

Originally Posted by tatts

in all fairness, 2.5ghz on a 170 isnt much of a OC compared to others and you go on about this prime 24.14 but its only using 50% of your cpu, not exactly tortue is it? :stick:

At 1.33v its probably could run Prime indefinitely! I want to see something freaky! Show us 2.8ghz and up! :p:
11-22-2005, 03:22 AM
Dani

Quote:

Originally Posted by Rufus7

But your first Screen at 3,1Gig and 1,5Vcore under Air is interesting.

I have an Ambient between 17,5°C und 18,5°C but you Chipset at higher Ambient is lower than mine.
And i have the original DFI Northbridgecooler on Board.
Yours must be modded or under water or your Ambient is below 15°C.

Yes it's modded, here is a pic of my old setup with tuned VapoChill LS, but I use that NB cooler, 100% copper, fan @ silent :)

Chipset cooler

..and ambient temp is 22-23ºC ;)
11-22-2005, 03:26 AM
Dani

Quote:

Originally Posted by alpha0ne

There is always some dissent as to what is deemed to be an acceptable proggy to show 100% torture stability (mainly by those who's systems are not 100% using Prime95 v24.14 :rolleyes: )

Hehheh, that's true :p:

Quote:

You have a marvellous chip there Dani if you can run Prime v24.14 @ over 3.1Gigs :fact: :clap: , definately a keeper :)

Thanks mate, should try someday with CO2 :slobber:
11-22-2005, 03:39 AM
Monge

Dani: awesome chip that is :)

Any results with the 146 CABYE 0542FPMW?

Show 100 post(s) from this thread on one page