Printable View
I had to raise volt a bit for 3.0ghz. It seems to work better with certain '%' of VID. Still it is less than I needed with SD. This is with 1.325 x 113 (1.497v) 0540 fpmw [IMG]http://img516.imageshack.us/img516/7703/op32m3k3vd.jpg[/IMG] linky to 1.441v bios http://img316.imageshack.us/img316/4...900139v6ly.jpg
Quote:
Originally Posted by rodman
http://www.3dxtreme.net/other/CPUS/O...-12hrprime.jpg
Quote:
Originally Posted by ncsa
No problem with with 146 FPAW.
http://www.xtremesystems.org/forums/...79#post1147379
My 146 CABYE 0540 FPAW @ 1.6 V, 2x 512 MB Geil One BH @ 3.6 V.
On air, Big Typhoon:
(ETA: these shots are SuperPi 1M only. I didn't have time to Prime at higher than sock volts yet)
http://www.cons.org/cracauer/oc-scre...uperpi1m_8.png
%%
For the kicks of it, here is with 4 sticks of the Geil One BH. Might be the fastest superpi on air with 2 GB memory.
http://www.cons.org/cracauer/oc-scre..._4sticks_1.png
%%
Geil One TCCD
http://www.cons.org/cracauer/oc-scre...uperpi1m_4.png
%%
Here is Geil One TCCD maxed out. CPU not high, but sure has a good memory controller:
http://www.cons.org/cracauer/oc-screens/oc-tccd340.png
That prime stable though? I can push 3 Ghz too SuperPI32M stable - but prime crashes right away.
http://www.3dxtreme.net/other/CPUS/O...00-superpi.jpg
Hello Guys,
here is my opteron 144 apmw 0530, without heatspreader and cooled my water (tripple radi and nexxxos xp rev 2.0).
http://www.forumdeluxx.de/gallery/da...5302870S24.JPG
http://www.forumdeluxx.de/gallery/da...862870OCCT.JPG
http://www.forumdeluxx.de/gallery/da...535SuperPI.JPG
With lower temp ... over 36°c and he is instable :(
http://www.forumdeluxx.de/gallery/da...MW05302930.JPG
http://www.forumdeluxx.de/gallery/data/500/8886apmw.jpg
Gamestable and benchstable @ 3060Mhz with 1.39v :stick:
Ok, finally got 3.1GHz stable on AIR :cool:
http://koti.mbnet.fi/dani69/DFI%20nF...V_+11h_AIR.gif
MuroPI v1.1 is same as spi mod 1.4, it's just translated to Finnish languageQuote:
Originally Posted by dogsx2
Here down in Helsinki near warm sea it is'nt winter, yet :(Quote:
Originally Posted by daysleeper
But hmm, do you want to buy it when im ready to leave my Opt? :D
i couldnt resist, a uk retailor got some 146's in today so i got 2 more coming, hoping theyve got better mem controllers so i can pass 3.1ghz stable :D
geeze tatts : leave some for us :)
youre not in the uk anyway and dont think they ship abroad :(
i got an addiction now, even though my 144's have gone, still leaves 3 146's & a 148 lol
and with a lot of € ;)
send me 1.
No, my shots are Pi 1 M only.Quote:
Originally Posted by dnottis
My CAYE does 2800 MHz 12 hours Prime stable at stock volts.
I didn't have time to prime at higher volts yet :(
My 148 CABYE 0535XPMW stops like a wall at 2805MHz (11x255) with Ocz 2GB EB 4000 kit. Tried to raise Vcore to 1.65V,but Prime fails after 3 hours. :(Quote:
Originally Posted by rodman
muhahaha
soon as tatts said that techohead.uk had 146 opty price raised in 30 minutes for 30Ł
it was 125 now 151
damn greedy :banana::banana::banana::banana:ing retailers.
haha someone just ordered 1 for £150 plus delivery (£160) and only 1 left pmsl
some people really have money :)
i ordered 2 this morning soon as they was added so got mine cheap and i knew no one else in the uk will be getting any before xmas :banana:
so 3 + 1 you already have + 2 ordered ? come on man send me 1 ;)
Quote:
Originally Posted by Dani
Sorry but SP2004 is not the best Stabilitytest.
If you want to go sure then use Prime95 version 24.14!
And make the Test Custom FFTS in place changing every 15 Minutes. (8-4096).
Thats the ultimative Stabilitytest for the CPU!!!!!!!!
can you tell me the differences between prime95 & sp2004 please? :stick:Quote:
Originally Posted by Rufus7
The SP2004 is the Old version of Prime 95 Versions before 24.xx.
And these versions are not optimized to set the new CPUs under 100%Load.
Prime Versions higher than 24.11 are better for Stability Test.
Try it and you will see. Same Frequency and Vcore and than let SP2004 run. After an Hour try it with Prime 24.14 Custom FFTS in Place . And the CPU will soon give up.
[url=http://www.bilder-hosting.de]http://www.bilder-hosting.de/uploads/8b98eedc9a.jpg[/url
Nothing except for maybe versions. :slap:Quote:
Originally Posted by tatts
SP2004 is like SuperPi.Says nohting about Stability.
If you dont believe it test it out with SP2004 an Prime95 24.14.
Set a Vcore an Frequency thats Stable under SP2004 und then let Prime95 24.14 Custom
FFTs in place changing every 15 Minutes run. And you will fail in the first minutes or seconds. And thats the Truth.
Or Try it with RC5-72 or Setihome.