:woot: :woot: :woot: Great job by a very good(almost to great) oc'er.
Missed your post, hoped you hadn't died or something. :D I'm sure it will go higher with a little massaging. :thumbsup:
Printable View
:woot: :woot: :woot: Great job by a very good(almost to great) oc'er.
Missed your post, hoped you hadn't died or something. :D I'm sure it will go higher with a little massaging. :thumbsup:
i got an FPBW from tankguys but now they're out of stock..and chances are they'll get CAB2E's in teh next shipment.
Thanks. But I think I might be done with that one. I need to start testing on another Opty 146 CABNE 0530APMW. I'll start with some air sometime during the next couple of days.Quote:
Originally Posted by dogsx2
@Gundamit, that does it - mine coming out of the box today. If I can get into the 21's that is better than the SD I have now. I notice the Dynamic Idle Cycle Counter is disabled. Iirc I read something about this with these cpu. Does it need to be disabled for certain reasons or absolutly for oc. thanks.
ordered when ?Quote:
Originally Posted by k0nsl
Lol. You're asking Mr.Short Term Memory! I can't recall, thats why I keep all my old screenies so I can remind myself of the memory settings. It may be that its just the default setting and I never tried it another way. :confused:Quote:
Originally Posted by coop
Awesome cpu, free. Very good temps too. :toast:Quote:
Originally Posted by freestylercs
Once again, you'll always able to get the good ones.
Next time, you can pick mine. :D
Quote:
Originally Posted by TEDY
Nope only fpmw and fpaw, but i got 2 hand picked fpbw from datorbutiken.com. But the dont have anymore now. I have only seen 3 fpbw in sweden.2 of them are mine(one bad and one good but no gold ex)
has anyone got any clocks for a 146 cab2e plz??
i won't complain when i get them :toast:Quote:
Originally Posted by Lastviking
have got an CAB2E 146 0540FPMW 0167er BatchQuote:
Originally Posted by tatts
3000MHz@1,45V
>1,5V its really too hot with heatspreader.
1M goes up to 3150@1,6V
free
CAB2E 0540 FPMW 1.6v 3.1ghz 24/7 on Watercooling
Max temp while gaming/stressing etc. 48c
Prime stable? Don't know, prime sux :p:
Anyone has already tested a CAB2E 0542 ??
I've found a 144 with that stepping.... is it a good clocker? :)
cheers garrett & free
i will have one on tuesday and hoping its mem controller will be better than my cabye
Opty 150 at 2.92 at 1.55 24/7...it's the second one wich is worth than my first : 3.1 at 1.6 24/7 and suicide screen at 3.3
146 0540FPBW TT BigTyphoon, room temp 23ºC
http://koti.mbnet.fi/dani69/DFI%20nF...s_1.5V_AIR.gif
You got the best 146 chip in world Dani, gratz. Maybe it will do 3.9-4.0+ :slobber: on cascade if it dont have to big cold bug.Quote:
Originally Posted by Dani
Is anyone geting over 2.8GHZ using 2x1GB stix?
yes.Quote:
Originally Posted by rodman
i am running 10 x 300 with 2x1 gig crucial ballstix but since i haven't testing 300 htt 1:1 i am using the 9:10 divider.
Thanks Lastviking :toast:Quote:
Originally Posted by Lastviking
As you know we got soon winter up here in scandinavia, gonna do some personal records with AIR, hopefull some AIR WR too :rolleyes:
I got sick of resetting the bios trying to get this ram to run faster.
I could do 10x250 1:1 but nothing higher (maybe 260 1:1 I forget)
I am now running 10x280 with ram at 234mhz. I was thinking it might be my MB but who knows. Maybe later this week I will mess around some more.
Quote:
Originally Posted by rodman
Well when i look out the window there is allready Winter!!!! :rolleyes: ....And Dani when you sell your Opteron,don't keep it inside your team :D
[QUOTE=Dani]146 0540FPBW TT BigTyphoon, room temp 23ºC
You got a good cpu. Why don't you use spi mod 1.4?
I do not think that you are alone .. it maybe that the FPAW chips are experiencing this issue of > 260-265 - no boot.
Quote:
Originally Posted by Eagleclaw
Quote:
Originally Posted by ncsa
:confused: