XS HWBot Team

Printable View

Show 100 post(s) from this thread on one page

03-14-2011, 01:21 PM
Don_Dan

http://img190.imageshack.us/img190/3...ch14th2011.jpg

Nice runs zeneffect and chew*! :up:
NameGT, what's up with all those runs at default speed? :p:
03-14-2011, 02:10 PM
SteveRo

Yes, Gentlemen, job well done! :clap::clap:
03-14-2011, 02:30 PM
chew*

My scores suck, more or less just feeling one of the ref cards out while I had the chance. CB was about -135's without pll , test pll next and maybe ram if my choke mod works then move on to next card.
03-14-2011, 02:37 PM
Don_Dan

Bad scores are better than no scores! :p:

You're also the first person to contribute 2000 points to the team, that's a great achievement in my opinion. :)
03-14-2011, 04:15 PM
chew*

I stand corrected, make that 3 more cards to test before I get to the direct CU II.

After 2 hours under the knife tonight the card that fed ex owned on it's trip back from CES is alive again.
03-14-2011, 06:32 PM
Linuxfan

Quote:

Originally Posted by chew*

My scores suck, more or less just feeling one of the ref cards out while I had the chance. CB was about -135's without pll , test pll next and maybe ram if my choke mod works then move on to next card.

Word. Can't wait for real scores... those runs are nice though for now! :)

Quote:

Originally Posted by Don_Dan

You're also the first person to contribute 2000 points to the team, that's a great achievement in my opinion. :)

+1 to that! :up:
Sorry I'm not up there with ya yet! :D
03-15-2011, 06:32 AM
Aerou

Quote:

Originally Posted by chew*

After 2 hours under the knife tonight the card that fed ex owned on it's trip back from CES is alive again.

Please, explain more!
03-15-2011, 09:17 AM
chew*

Quote:

Originally Posted by Aerou

Please, explain more!

Some resistors caps got crushed in shipping.
03-15-2011, 09:36 AM
l0ud_sil3nc3

anybody got an optimized copy of XP for superpi they wanna share?
03-15-2011, 10:34 AM
chew*

Quote:

Originally Posted by l0ud_sil3nc3

anybody got an optimized copy of XP for superpi they wanna share?

I'm just using full install SP3 atm. To be honest OS is worth the least for pi.........
03-15-2011, 11:11 AM
l0ud_sil3nc3

Quote:

Originally Posted by chew*

I'm just using full install SP3 atm. To be honest OS is worth the least for pi.........

32 bit I assume?

so if the os is worth the least for pi, then what would you consider the most important? proper tweaks i.e setting afinitty, lsc, themes, wazaa. . .
03-15-2011, 11:25 AM
chew*

Quote:

Originally Posted by l0ud_sil3nc3

32 bit I assume?

so if the os is worth the least for pi, then what would you consider the most important? proper tweaks i.e setting afinitty, lsc, themes, wazaa. . .

Timings. hardware tuning > software
03-15-2011, 11:28 AM
Linuxfan

Quote:

Originally Posted by chew*

Timings. hardware tuning > software

:up:
Running 32M as we speak... seems like this G.Skill 2200C7 kit doesn't go very far as far as timings go unfortunately... :(
03-15-2011, 11:44 AM
l0ud_sil3nc3

Quote:

Originally Posted by chew*

Timings. hardware tuning > software

well that's what I wanted to hear:up:

I have a M4E coming at the end of this week so hopefully it plays well with my hypers
03-15-2011, 11:47 AM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

well that's what I wanted to hear:up:

I have a M4E coming at the end of this week so hopefully it plays well with my hypers

Going to try hypers here in a minute on my M4E... Might be able to get a better 32M with my hypers if they'll run on the 2133 divider. :up:
You'll like the board. I've been enjoying it.
03-15-2011, 11:54 AM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

:up:
Running 32M as we speak... seems like this G.Skill 2200C7 kit doesn't go very far as far as timings go unfortunately... :(

what timings are you currently running?

my 2133 8-9-8 kit can run 2133 7-9-7 at less than stock volts and up to 2300 8-9-8 at 1.67

hoping I can use my hypers when the new board gets here
03-15-2011, 11:59 AM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

what timings are you currently running?

my 2133 8-9-8 kit can run 2133 7-9-7 at less than stock volts and up to 2300 8-9-8 at 1.67

hoping I can use my hypers when the new board gets here

I'm at 2250 7-10-7 25
Might try 8-9-8 :shrug:
03-15-2011, 01:28 PM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

Going to try hypers here in a minute on my M4E... Might be able to get a better 32M with my hypers if they'll run on the 2133 divider. :up:
You'll like the board. I've been enjoying it.

good that's what I like to hear, I just glad I found one in stock

http://www.chiefvalue.com/Product-_-...00160060010060
03-15-2011, 01:42 PM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

good that's what I like to hear, I just glad I found one in stock

http://www.chiefvalue.com/Product-_-...00160060010060

Couldn't get my Mushkin 2000C8 hypers to run with this board...
Oh well back to tweaking my PSC... :D
03-15-2011, 01:54 PM
l0ud_sil3nc3

Quote:

Originally Posted by Linuxfan

Couldn't get my Mushkin 2000C8 hypers to run with this board...
Oh well back to tweaking my PSC... :D

will they run at least 1600 c6?
03-15-2011, 02:09 PM
Linuxfan

Quote:

Originally Posted by l0ud_sil3nc3

will they run at least 1600 c6?

Yeah man, 6-5-5-15 with subs tweaked to the max here is my best run with 1600 divider: http://hwbot.org/community/submissio...min_23sec_78ms
Just doesn't compare to this kit even with not great latencies. :)
03-15-2011, 02:44 PM
Don_Dan

http://img340.imageshack.us/img340/1...ch15th2011.jpg

NAMEGT has finally posted some results at higher than default clocks! :D :up:
Also it's great to see that Aerou is posting a result of his new SB rig! :up:
And of course Linuxfan who has flooded the bot with many nice submissions today! :up:
03-15-2011, 02:59 PM
Linuxfan

Quote:

Originally Posted by Don_Dan

http://img340.imageshack.us/img340/1...ch15th2011.jpg

NAMEGT has finally posted some results at higher than default clocks! :D :up:
Also it's great to see that Aerou is posting a result of his new SB rig! :up:
And of course Linuxfan who has flooded the bot with many nice submissions today! :up:

:up:
Much more to come I hope! Ran out of time yesterday or would have had more runs up! :)
Thanks to Splave for selling me the nice 5.6g chip!
03-15-2011, 09:37 PM
namegt

3DMARK a little clumsy, I need to practice. hahaha ;)
and must study more. Somebody help me.
03-16-2011, 02:46 PM
Don_Dan

Quote:

Originally Posted by namegt

3DMARK a little clumsy, I need to practice. hahaha ;)
and must study more. Somebody help me.

Seems fine to me now! :D

http://img843.imageshack.us/img843/1...ch16th2011.jpg

Great work Linuxfan and NAMEGT, again a ton of results! :up:
Aerou, push your memory and watch that 32M fly, seems like you found a good CPU that will give you many more nice scores. :yepp:
Last but not least, slaveondope who is doing his first DICE session! Show some more scores please! :up:

Show 100 post(s) from this thread on one page