Team 36362 XS Folding Roster

Printable View

Show 100 post(s) from this thread on one page

01-28-2009, 12:16 PM
MaK2000

Hey King,
Is that Tatsu? I haven't been to Magic Mountain in a couple years so I haven't actually seen it yet.
01-31-2009, 06:53 PM
Geebs

Quote:

Originally Posted by p2501

Maybe those 150 are all SMP WUs which are way higher in points per WU than GPU WUs. Your 300 WUs are mixed with GPU WUs, propably mostly GPU/PS3.

Ahh ok... Thanks for the heads up:)
02-15-2009, 09:31 PM
sniperbob

hey... My room is cold, so the folding is resuming on my 9800GTX+ while I sleep!
03-07-2009, 02:19 PM
mugs

Just joined up. Never had a rig capable of doing much with folding before (always lowend stuff geared to silence) but now have a 4870 so figured I'd throw in.
03-07-2009, 03:15 PM
WFO

Quote:

Originally Posted by mugs

Just joined up. Never had a rig capable of doing much with folding before (always lowend stuff geared to silence) but now have a 4870 so figured I'd throw in.

:up::up::up:
03-10-2009, 11:34 AM
=SOC= Admiral

I signed up although Im not going to have this laptop for long and am going to have an actual rig. My parents said i had to give them my laptop to build a desktop so how long do you think that took me to answer. I will also have in my possession my old Pentium III and matrox 500 box back soon and will make that a 24/7 folding box that i can add a third 120mb SD memory stick to. i should probably also do a fresh install of XP. But i know my dad wont let me do that. I am folding as =SOC=_Phenom_II. Do you think that the Pentium III will do fine.
04-28-2009, 08:37 PM
texnofobix

Quote:

Originally Posted by =SOC= Admiral

Do you think that the Pentium III will do fine.

That's what one of my folders is.
05-06-2009, 05:25 PM
alphadog009

i just joined with my sig system but i have been running the gpu client cuz i have found it performs much better.... how do you run two seperate instances of the gpu client on each seperate card??? i know that you have to first take SLI off but the guide on the F@H website didnt work for me...
05-06-2009, 05:58 PM
INFRNL

There are 2 guides. Also what OS you running? The guide on F @ H site worked for me
05-06-2009, 06:39 PM
alphadog009

i am using vista 32 bit

i followed all the instructions for that guide but when i run f@h it shows the following dialog:

http://img8.imageshack.us/img8/8801/picture1fto.png

?????
05-06-2009, 06:52 PM
[XC] 4X4N

Look like your flags are wrong. Are you trying to run 2 clients on 2 card? If so you need to have -gpu 0 and -gpu 1 for your flags.
05-06-2009, 07:11 PM
alphadog009

so i went into the properties for the links i used...

GPU 1

http://img9.imageshack.us/img9/2569/gpu1.png

GPU 2

http://img7.imageshack.us/img7/6472/gpu2.png

in the "start in" the address is

C:\Users\Karan\AppData\Roaming\Folding@Home-gpu
and
C:\Users\Karan\AppData\Roaming\Folding@Home-gpu2

it seems to me that that is the problem but when i try to change it to gpu0 and gpu1 or even gpu1 and gpu2 it gives me an error saying that no such file is present

::EDIT:: Maybe this is the problem... when i made shortcuts to the desktop, they were that of the F@H gpu .exe file not the F@H x86 .exe file?????

::::EDIT:::: Seems to have fixed it but now complaining that 2nd gpu's drivers are out of date......as far as i know drivers are all up to date
05-06-2009, 08:41 PM
INFRNL

EDIT: Didnt see that you may have fixed it. not sure why is says driver out of date. Just reinstall driver and try again.

This is exactly how mine looks... I think I may see an issue: on your target it should have a space between gpu and #

"C:\Program Files (x86)\Folding@home\Folding@home-gpu\Folding@home.exe" -gpu 0
C:\Users\Powilleit\AppData\Roaming\Folding@home-gpu

"C:\Program Files (x86)\Folding@home\Folding@home-gpu\Folding@home.exe" -gpu 1
C:\Users\Powilleit\AppData\Roaming\Folding@home-gpu2

Also, can you fold on either card right now the way you have it? Also dont forget when you initially start it; you have to config and make sure user id is different.

I am using version 6.23 too. the system tray version as well. I followed the guide on F @ H exactly, no issues. there has got to be some minor mistake you/ we are overlooking.
05-07-2009, 12:45 AM
Russ_64

I personally always install into a seperate directory such as C:\FAH_GPU1 as Vista security can cause problems if you use Program Files and User files locations.

Also when you run for the first time with -configonly flag make sure that you add additional parameters -gpu 0 -local (that will ensure that all files are in one directory). Also, that way you don't need to edit command line in desktop shortcut to exe.
05-07-2009, 01:24 AM
HuffPCair

Ok so I ran into a weird problem with Win7. I had been folding on the Win7 Build 7000 and upgraded to build 7100. I did a clean install so I had to reinstall my folding software and I configed it to my username and team number 36362 but for some reason keeps turning WUs into Default. Anyone know why this may be happening. I mean I dont care about the points as long as I am folding and completing the tasks but I would like to help out XS as much as I can even though it isn't much right now.
05-07-2009, 03:32 AM
alphadog009

well all of a sudden now both are showing the same driver issues I'll reinstall when iget home today... See if that fixes it...
05-07-2009, 03:57 PM
INFRNL

Quote:

Originally Posted by HuffPCair

Ok so I ran into a weird problem with Win7. I had been folding on the Win7 Build 7000 and upgraded to build 7100. I did a clean install so I had to reinstall my folding software and I configed it to my username and team number 36362 but for some reason keeps turning WUs into Default. Anyone know why this may be happening. I mean I dont care about the points as long as I am folding and completing the tasks but I would like to help out XS as much as I can even though it isn't much right now.

I had this problem on vista on a machine a while back, but cant recall how I fixed it. I think I had left over files from another install and ati card. I think I totally wiped FAH off the machine and did a fresh install; re-setup and was fine.

I think it has something to do with the shortcut not being proper so to speak.
05-07-2009, 08:59 PM
HuffPCair

Quote:

Originally Posted by INFRNL

I had this problem on vista on a machine a while back, but cant recall how I fixed it. I think I had left over files from another install and ati card. I think I totally wiped FAH off the machine and did a fresh install; re-setup and was fine.

I think it has something to do with the shortcut not being proper so to speak.

well that is the weird part I did a full clean install so nothing was left behind. it seems to be working now though
05-09-2009, 06:59 PM
INFRNL

Quote:

Originally Posted by HuffPCair

well that is the weird part I did a full clean install so nothing was left behind. it seems to be working now though

Glad to hear it. :up:
05-18-2009, 02:37 PM
cdu cnp

Wazzup Guys ,
Just stopping by to say hello and that I'm throwing my gpus in the ring.
I have ran WCG for over a year now and am getting tired of it(No GPU client, when the gpus are far more powerful than a CPU.),but I'll leave some power there .But I have 2 4890s and a Phenom2 940 @3.6 that will be running F@H.
I know neither are stellar performers versus I7 and Nvidia but you use what ya got lol.

Also used this post to help me get ma crap right.http://forum.xcpus.com/xtreme-foldin...pu-load-2.html
Made quite a difference.
05-18-2009, 03:49 PM
WFO

Quote:

Originally Posted by cdu cnp

Wazzup Guys ,
Just stopping by to say hello and that I'm throwing my gpus in the ring.
I have ran WCG for over a year now and am getting tired of it(No GPU client, when the gpus are far more powerful than a CPU.),but I'll leave some power there .But I have 2 4890s and a Phenom2 940 @3.6 that will be running F@H.
I know neither are stellar performers versus I7 and Nvidia but you use what ya got lol.

Also used this post to help me get ma crap right.http://forum.xcpus.com/xtreme-foldin...pu-load-2.html
Made quite a difference.

Woot! We can always use "more power!!!" :up:
05-18-2009, 08:41 PM
INFRNL

Welcome aboard!
05-18-2009, 10:06 PM
cdu cnp

Ordered 2 vf1000 zalman coolers,2 sets of copper ram sinks and mosfet coolers for the voltage regs on these cards .
one ran fine all day yesterday@925/1100 .Made my dummy plug got #2 going and error CITY on both,damn things wouldn't add 2+2 correctly.:explode::dammit:
Finally had to back the card mem down to 900 to get it stable.
Hence the ram sinks on order.

So right now I have 2 cpu clients going and 2 vga going. :yepp:
06-17-2009, 09:37 AM
DR3

Quote:

Originally Posted by cdu cnp

Ordered 2 vf1000 zalman coolers,2 sets of copper ram sinks and mosfet coolers for the voltage regs on these cards .
one ran fine all day yesterday@925/1100 .Made my dummy plug got #2 going and error CITY on both,damn things wouldn't add 2+2 correctly.:explode::dammit:
Finally had to back the card mem down to 900 to get it stable.
Hence the ram sinks on order.

So right now I have 2 cpu clients going and 2 vga going. :yepp:

?? 2 CPU clients running ??
Why not run the SMP client?
Is a lot less hassle and is more stable than running multiple singles.
07-05-2009, 03:22 PM
RoadconeTuning

i've got F@H GPU client running on my 9600GT while WCG on my cpu... both run whenever im not using the computer... but i still have to play my games :)

should have a S939 A64 system running F@H soon as well.

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:15 PM.

XtremeSystems