MUSHKIN PC4000 2gB SMOOKKIINNNNN!!

Printable View

Show 100 post(s) from this thread on one page

11-30-2005, 07:49 AM
bigjohns97

I bet there is a reason why these are stable with benchies but not stable with 3d. Anyone have any thoughts?
11-30-2005, 08:23 AM
uOpt

Quote:

Originally Posted by bigjohns97

I bet there is a reason why these are stable with benchies but not stable with 3d. Anyone have any thoughts?

Either heat or not really stable. Is it prime-stable?
11-30-2005, 12:07 PM
sin0822

Quote:

Originally Posted by Bar81

uh dude, A64 controllers have problems with 2GB of RAM. Some work fine at high speed and others crap out which is why you'll see anyone with half a clue tell you the optys have the better controllers as they are more stringently tested with regard to memory controller. Comparing Intel motherboards to AMD CPUs is pointless as one has nothing to do with the other.

Yes they do, because the intel memory controller is located on the motherboard. And the A64 memory controller should handle more stress and perform better than that of the intel 865 chipset motherboard. And DUDE obviously they opertons have better memory controller.
11-30-2005, 01:04 PM
Staucher

:)

Mushkin extreme Perfomance XP4000 (Samsung UCCC)

testing on
Abit AN8 Ultra
150 Opteron

268-3-4-3-8-1T/2.5V

http://free.pages.at/speedy444/Hardw...B.@.268mhz.png

285-3-4-4-8-1T/2.5V

http://free.pages.at/speedy444//Hard...B.@.285mhz.png

Really well selects
11-30-2005, 04:18 PM
Hound

nice results dude! how much do those timings affect performance?

even though this is UCCC and the IC's used in 2gb Redlines are now CE-6
11-30-2005, 05:18 PM
Duonger

those are 2 diff products.

the uccc is 991483
the ce6 is 991493

Duonger
11-30-2005, 05:41 PM
MayhemNJ

Well this is driving me nuts...I got my ram last week and popped it in. Running it at 200 2-5-3-2 for now. Runs great but I noticed in Nvmonitor(ntune) that the HT mhz speed keeps defaulting to 606mhz. All my other ram was always 1010mhz. I have cool and quiet disabled and Im running an FX-57 on an Asus SLI Premium. Any help would be appreciated. Also, stays at 606mhz no matter what Hyper transport frequency is set to in the bios. Multiplier in ntune is at 3. I can change it to 4 or 5 but doesnt stay set. Always goes back to 3.
11-30-2005, 05:48 PM
bigjohns97

Quote:

Originally Posted by Martin Cracauer

Either heat or not really stable. Is it prime-stable?

dual-prime stable and memtest from dfi bios stable.
11-30-2005, 05:53 PM
rcillig

Well Im Stable at 280 so far passed mem test with no errors.... gonna prime it now !
11-30-2005, 06:04 PM
charlie

Quote:

Originally Posted by rcillig

Well Im Stable at 280 so far passed mem test with no errors.... gonna prime it now !

:slobber:
11-30-2005, 08:15 PM
Dissolved

Quote:

Originally Posted by rcillig

Well Im Stable at 280 so far passed mem test with no errors.... gonna prime it now !

try OCCT, and memtest windows. i hear prime is buggy in 64 systems.
11-30-2005, 10:32 PM
Phil The Greek

Quote:

Originally Posted by rcillig

Well Im Stable at 280 so far passed mem test with no errors.... gonna prime it now !

Did you try any 3D bench?
11-30-2005, 10:49 PM
Staucher

Quote:

Originally Posted by Hound

nice results dude! how much do those timings affect performance?

even though this is UCCC and the IC's used in 2gb Redlines are now CE-6

Thx :)

affect in benches (SuperPI) 3dMark and Games no effects to the Redlines with CE-6 Infineons.
12-01-2005, 05:17 AM
rcillig

Quote:

Originally Posted by Phil The Greek

Did you try any 3D bench?

naw dont got that, where can I get it from... ran prime for 8hrs so far with no errors... 280 @ 3-4-3-8, Ran Aquamark3, and alll the 3d marks..01-03-05 all ran great with no lockups. Gonna try and tightin them timings a bit now.
12-01-2005, 05:42 AM
Squire

Quote:

Originally Posted by rcillig

naw dont got that, where can I get it from... ran prime for 8hrs so far with no errors... 280 @ 3-4-3-8, Ran Aquamark3, and alll the 3d marks..01-03-05 all ran great with no lockups. Gonna try and tightin them timings a bit now.

3Dbench refers to 3dmark01 I think.

You are very lucky! :p: . My redline is having a hard time running 3Dbenches even at 260.

Which slots do you guys think these ram like best? Orange or Yellow? So far I only tried yellow because this ram doesnt fit on the orange slot (my zalman heatsink is in the way).
12-01-2005, 06:14 AM
rcillig

with my pc3500 the Yellows wernt stable so i didnt try them I started in the Orange ones this time.
12-01-2005, 06:46 AM
bigjohns97

rcillig : can you please post what settings you used to get so high clocks.
12-01-2005, 07:06 AM
rcillig

Im using the exact settings at Saucher posted in his screen shots above.
12-01-2005, 07:07 AM
devdas ltd

I just ordered these pairs from mushkin, hoping for some nice performance ;-)
12-01-2005, 07:18 AM
tjj

Hmmm, i wonder how come Charlie's kit did so well comparing to the others around here.. Most have a rather poor OC (~ 260), judging from the latest results.. Guess i'd have to take 2GB of G.Skill 1GBFX.. prolly score 280 @ 2.5-3-3-7 with my IMC on EXPERT.. :D They cost about the same, too..
12-01-2005, 07:29 AM
Phil The Greek

Quote:

Originally Posted by rcillig

naw dont got that, where can I get it from... ran prime for 8hrs so far with no errors... 280 @ 3-4-3-8, Ran Aquamark3, and alll the 3d marks..01-03-05 all ran great with no lockups. Gonna try and tightin them timings a bit now.

Yea I mean all the kind of 3DMark.Great memory you got there(or great IMC) :clap:
12-01-2005, 07:31 AM
Squire

Quote:

Originally Posted by rcillig

Im using the exact settings at Saucher posted in his screen shots above.

Dude... no wonder you can hit 280, Saucher settings are not for the REDLINE series. Those timings are extremely loose for a CE-6, which is the one used in the redline.
12-01-2005, 08:18 AM
JNav89GT

Quote:

Originally Posted by Squire

3Dbench refers to 3dmark01 I think.

You are very lucky! :p: . My redline is having a hard time running 3Dbenches even at 260.

Which slots do you guys think these ram like best? Orange or Yellow? So far I only tried yellow because this ram doesnt fit on the orange slot (my zalman heatsink is in the way).

orange slots work best for me
12-01-2005, 08:20 AM
Phil The Greek

Quote:

Originally Posted by Squire

Dude... no wonder you can hit 280, Saucher settings are not for the REDLINE series. Those timings are extremely loose for a CE-6, which is the one used in the redline.

Ooooppss...now realized he is @3-4-3-8
12-01-2005, 08:20 AM
JNav89GT

Quote:

Originally Posted by tjj

Hmmm, i wonder how come Charlie's kit did so well comparing to the others around here.. Most have a rather poor OC (~ 260), judging from the latest results.. Guess i'd have to take 2GB of G.Skill 1GBFX.. prolly score 280 @ 2.5-3-3-7 with my IMC on EXPERT.. :D They cost about the same, too..

2T will drop your performance a bit
I'd say just guessing 260 at 3-3-2-6 1T would be faster than 280 2.5-3-3-8 2T, maybe someone could confirm

Show 100 post(s) from this thread on one page