Working on 3200mhz 8m stable ATM, pics soon!!
Printable View
Working on 3200mhz 8m stable ATM, pics soon!!
What did you guys order this from? Just curious.
Mine's on so-so water....got it up to 2980 1.41V 1M stable.
http://img322.imageshack.us/img322/6...80m141v4pu.png
It would crash at 3000 1.41V 1M in the 14 iteration....never tried anything between 2980 and 3000.
Now I have another problem (and maybe why I couldn't get 3000 stable), my board won't go over 332 with any CPU or chipset voltage :rolleyes:
This is a fun OC though, I love a challenge. I think I might retry the 10x multi now.
5/6 divider at 331MHz = 276 @ 2.5-4-4-8, no priority adjustment.
Not tweaking for time yet (although the mem controller doesn't seem to be very good on this Opteron :stick: ), I will though ;)
I've got my own Ballistix sitting on my desk....some sick UTT too :D
I really think there is something to the statement that these Opterons hate TCCD.
Alright, I think temps are killing me at this point--48C load.
309.2x10, mem@ 220/2.5-4-4-8 :rolleyes:
I'll be swapping in my Ballistix now and seeing what I can get. BTW, the 10x multi seems fine now, which is weird.
http://img167.imageshack.us/img167/2...91m150v2di.png
nah, my problem is that i just see NO benfit of running anything higher than 2.5-3-3.Quote:
Originally Posted by Vapor
my 1gb crucial value stick is topping out at 225mhz with 3-3-3.. and 2.5-3-3
i played with some geil ddr500, rated for 2.5-3-3. pretty sure it's hynix. got to 275mhz at 2.5-3-3. higher timings didn't get a single mhz
maybe play with some ballistix? 2.5-2-2 = 257mhz, 2.5-3-3 = 260mhz, 3-3-3 or 3-4-4 = 260mhz
at this point, i'm really scratching my head.
I can OC my CPU higher when my TCCD is at 2.5-4-4-8 than I can when it's at 2.5-3-3-0.
Anyway, I was sick of the TCCD bullsh so I threw in my Ballistix @ 280 3-3-3-8 and got a much better time :D
http://img198.imageshack.us/img198/7...80m150v8eh.png
You ain't the only one. After seeing RobberBarons's screenie I thought I should revisit the voltage. Sure enough I dropped .25v and no impact on OC. Even managed to beat my personal best on 32M with this run. Everyone getting this CPU needs to know rule #1. This is a low volt CPU. Start low!Quote:
Originally Posted by ozzimark
http://img170.imageshack.us/img170/5...lowv1459do.png
Looks like the s939 opterons are finally starting to trickle into the states.
@ ewiz:
148 for $285
150 for $389
152 for $821 :eek:
They don't have any 144's or 146's yet. Vandi must be putting too much pressure on fab51 for these. :nono: :D
has to be my board thenQuote:
Originally Posted by Vapor
gundamit, very nice. i'm almost tempted to do the same.. though i definitly get higher with 1.62v than i do with 1.55v
Welp, I popped off the IHS, bumped up the voltage .02 and she's 5C cooler under load....:woot:
3100 1M:
http://img272.imageshack.us/img272/3...vpopped4bd.png
Nice chip Vapor :) Go for 3.2!
Is UTT or Ballistix faster?
I noticed with Ballistix I can run 2.5-2-2 1T up to 250 Mhz but UTT can go cas 2 at this speed. But then I was reading an article at anandtech and wes thinks ballistix is fastest ram all things being equal.. But there not. Understand? prolly not.
Could someone try the afore mentioned settings please? I never did jump on UTT bandwagon because I was always happy with Ballistix's low volts (coolness) and speed it offered. But now, I need some new memory since I'm keeping my X2 with ballistix and need new ram with 144 setup. Get more or UTT? Thanks.:)
Don't know what you're talking about Zebo....anyway, onto more news.
Haven't tried 3.2GHz yet AFI, but here's 3.15GHz :D
I think it has more too...it was only 45C loaded.
http://img335.imageshack.us/img335/4...vpopped1tm.png
It's only marginally faster because I had to drop the RAM divider from 183 to 166 :(
I can pop in my Redline and probably get mid 26s though :D
Where are these 939 optys coming from, i cant find them anywhere!
^^^ You need to read the thread a little bit. ;)
I looked, didnt find- Maybe i went too fast...
Alright, first time I've ever run 8M on this processor was a success!
3140 @ 1.61V
http://img4.imageshack.us/img4/6826/...vpopped6jv.png
Now it's time to throw in some Redline and shoot for 3.2GHz :woot:
vapo, i see you playin with upper voltages, what kind of cooling?
^^^^IHS off and Water^^^^Quote:
Originally Posted by VulgarHandle
geewiz....these Opti are clocking very high and looking mighty good for such a low price tag :slobber: they're begging for phase change!!
Gundammit or anyone else who has one....can you guys please run atleast 30min ~1hr of Prime blend and see how high they can clock? please... :toast:
upper voltages? :lol: I've run 1.85V through mine already...Quote:
Originally Posted by VulgarHandle
I would be too man cept I ain't got nothing to keep this thing cool :(
Anyway, I don't think I'll get 3.2GHz without an ice bath or the AS5 settling in A LOT.
Here's 3.17GHz with my Redline:
http://img145.imageshack.us/img145/9...vpopped9km.png
Whats your water set up like?
I think you need one of these:
http://img.photobucket.com/albums/v4...N/P1010073.jpg