Mother of all Cascades, -100ºc Dual Evap that Cools the Motherboard also!!

any updates?

long time since i looked here the last time but it's even more impressive than the last time....it's amazing to see sb. wanting to become top of the world and putting all his efforts in it. by the way it's intersting for lots of people here as well :D
I love this project, I like the way you're trying to get better and better...it's simply one of the best i ever watched and will continue watching.
All my respects for you and good luck that the day will come when you will see 2x -100°C :)

Well, I'm back home for one or two more weeks.

I can get a part kit to make the SRE-1/8 ton valves in to 1/4 ton. I found out I can go all the way to 1/2 ton if I want with them.

So I'm going to try the 1/4 ton valves

Getting some more R1150

Talked with a company about having me change my step up. I'm talking with Chilly1 about it. We are thinking of making this one of the first Crossfire cascade system. The down side is I will get -100C on the CPU but on the two GPU's will hit -70C.

What do you guys think?

-70 on the gpu is good if the R520 turns out to have the coldbug too ;)

I hope they don't.

The X1800XT has the R520 with a 90nm chip

Hmmm, only -70°C on the GPU's..... not sure if that's good enough. :D

;)

Quote:

---

Originally Posted by extremecorvette

gclg2000

Sporlan thinks the valves are two small, I'm getting a new kit to make them a 1/4 ton. I'm going to try this and see what happens.

But don't you think I should at least get one to come down to temp? I'm not even close to the temp I need. Everything at this point tells me the valve is to small. At this point I want it to be so when I go to the 1/4 ton it fixes my problem. Sporlan tells me there should be no problem running two valves in the system like I am. That they have seen it done before with no problems.

---

Ya, sounds like a good plan. The sporlan TEV i used was rated for 1/2 ton and my parker PEV was 1/2 ton also.

I'm scared that going to 1/4 may still not be enough. I know they 1/2 ton worked well for me and i'm pretty sure those are the same sizes that chilly uses.

But don't quote me on that. :nono:

Looks good, none the less :toast:

There's no cold bug on r520.

Regards

Andy

any updates???

beautifull!!

No new updates

Still waiting on parts, and more R1150
Once I get back to work I have a huge surprise for all of you!

is the surprise a third stage? ;)
keep up the good work, and I hope those parts ship quickly...

Quote:

---

Originally Posted by extremecorvette

No new updates

Still waiting on parts, and more R1150
Once I get back to work I have a huge surprise for all of you!

---

What are the part #'s of the new valves you got now?

Got links?

Same valves bodies but new push pins, carrier, and orifice.
That will make them 1/4 ton, I can go to 1/2 ton with these valve bodies.

KP02-0002

Ooo that sounds interesting, any ETA on parts and r1150?

G

sorry for repeating myself
but are there any updates??
this project is too good to be put on the second page, so now you have a litlle bump for you thread

Well I can say I have the valve parts to make 1/4 ton
I've been working with American Gas Group to get 3-4lbs of R1150, and should have it soon.

I'm waiting on evap blocks, and flex suction lines. I hope to have them some time this coming week. With out the parts I just can't do anything.

Blocks are here waiting onteh tops to teh enclosures probably wed thur...

Once I get everything I'll get this system up and running

can't wait to see the new results

this needs a bump.. anything new?

Idk im waiting to hear back..last time me and corvett talked i helped him gas the 2nd stage and that was it...we got the line set's built for ya btw.

Just waiting for the evaps and I will finish it

are they there yet???

Not yet but Reggie said soon.

Every one I found job at last. It's not with computers like I would have liked but it pays good.