Printable View
Sorry but that doesn't seem all that impressive. My 630 @ 3550MHz, doesn't break 50°C and that is with a Zalman CNPS7700Cu @ 5V, and a 120mm ADDA case fan @ 7V.Quote:
Originally Posted by ingentingmendeg
anyways here is a picture of my VF700Cu with a Delta EFB8012EF on it :)
http://i18.photobucket.com/albums/b1...re303Large.jpg
nice mod lowfat.
Guess its my turn to show off my aircooled system. Its a silver lian li case, silenced all the way with mats. I have a BT on the cpu, a NV silencer on the gfx and 2x120 ADDA 16db/38cfm in front/back.
http://www.soveposen.frac.dk/computer2resize.jpg
http://www.soveposen.frac.dk/computer1resize.jpg
http://www.soveposen.frac.dk/computerinside2resize.jpg
Hope u like the clean look:toast:
lian-li's are amazing. looking good outside and inside.
Very nice looking syatem there S!1v3rB@cK_Dk :toast:
Thx for the good comments... I know that it aint casemoddet with fans all over.. I was into casemods once, but im over that. I will rather have a stylish, clean looking, silent case.
But even though its silent, it is still quite cold - Cpu: 47°C, Gfx: 53°C, Mobo: 34°C, Mem: 36°C, chipset 40°C and HD 26°C All Load temps.
http://i30.photobucket.com/albums/c338/timpal/Inno2.jpg
this is my wife!! =)
Nice clean look, and the mobo color is sooo cool :D Although I still miss the alu-look:rolleyes:Quote:
Originally Posted by scream
You are married to a computer? :confused: :p:Quote:
Originally Posted by scream
Damn you for posting that, now im gonna have to buy that case :slobber: :(Quote:
Originally Posted by S!1v3rB@cK_Dk
Im guessing you can't use the Cpu air duct w/ your big typhoon?
You should remove the finger grills on your fans, a lot less sound and better airflow :)
thanks.. im planning on changing the psu very soon.. to something modular and pre-sleeved... :banana:Quote:
Originally Posted by S!1v3rB@cK_Dk
yes.. for now.. haha.. :DQuote:
Originally Posted by Ãœbergeek
Really nice work! Super clean look.Quote:
Originally Posted by S!1v3rB@cK_Dk
Just one hint:
If you're really into silent computing, then remove those fan guards. They only irritate the air flow and make the fans noisier. Slow spinning fans won't chop off your fingers. :D
I swear I didn't post it on purpose ;) :D But it is a really nice case - light weight, clean alu look, good airflow and easy to work with. The edition of the case that I bought, doesn't come with the air duct ;) But im doing all fine without it.Quote:
Originally Posted by Ãœbergeek
Yeah, I might remove the grills. I just thought that with the fans running this slow it wouldn't produce any noice, but it wont cut fingers either.. So I thought that I might as well leave it there..
Just curious, but does your CPU run a fair deal hotter when the side is on? I've also got the BT in a similar Lian-Li and the load temps side on to side off can be as great as 10c...Quote:
Originally Posted by S!1v3rB@cK_Dk
edit- and yes, I really like your case. :p:
Zalman CNPS7700Cu w/ Sanko Denki 120X38mm fan
http://i18.photobucket.com/albums/b1...yo-Denki-3.jpg
Thx:) I have noticed that the cpu temperature rise a bit when the case side is on, compared to when its off. But it is only by a couple of degrees - no way near 10°C! How is ur airflow in ur case?Quote:
Originally Posted by Dr_at_Home
Nice clean look. I like the way u use the sinks on the different chips on ur gfx.. Do they help?Quote:
Originally Posted by lowfat
I have no idea, I just had some extra sinks so i threw them on.Quote:
Originally Posted by S!1v3rB@cK_Dk
2x80mm in the front, 2x80mm in the back, 1x80mm on the top.. I'm thinking of adding a blow hole right over the BT to let it pull in more air.Quote:
Originally Posted by S!1v3rB@cK_Dk
Also, its not always as big as 10c. Depends on my room tempature too. :p:
Well, the BT needs a good airlflow, and a lot of room to work optimal. I havent had problems furfilling that with my case. Depending on how fast the fans in ur case run, it looks like u are all covered.
Oh, btw.. U are having ur frontfans blowing cold air inside the case, and the backfans sucking the hot air out, right? I have chosen not to mount the 80mm fan in the top of my case, as the holes for the fans are too small, and makes the most silent fans, noisy as hell! Maybe it can ruin ur airflow somehow? Try turning it off, and see if there is any difference.
Yeah, front fans pulling air in, rear fans throwing it out. The top fan also throws air out, and having it unpluged doesn't really do anything for temps/noise as the loudest fans in here are the 2 in the TT PSU..
I've got afew extra fans that I will put in and see if they help push air towards the BT.
http://img80.imageshack.us/img80/299/s43000018jb.jpg
though im now running 2 PSU to give me enough juice
Wow, nice case turbotoaster! How are the temps on the AC cooler?