Amd Fsb Ranking

Quote:

---

Originally posted by SAE
Yeah. I set vdd at 1,9V in bios and adjusted the mod... finally to 2.2V. But it did not do it. I always had the impression those standard 1.9V are not enough but the mod did not help at all :(

And setting the max to around 2V at 1.9V did not help either.

---

That's kinda annoying, especially as the VDD mod is very near one of the mosfets that I'll be covering with a rather large heatsink, so I'd have to decide whether to do the mod or not before I sinked the board fully.

Thanks a lot for the info, I might see if the IC's legs are large enough that I can do the mod with microclips...

Quote:

---

Originally posted by Kameleon
That's kinda annoying, especially as the VDD mod is very near one of the mosfets that I'll be covering with a rather large heatsink, so I'd have to decide whether to do the mod or not before I sinked the board fully.

Thanks a lot for the info, I might see if the IC's legs are large enough that I can do the mod with microclips...

---

I use microclips :D

Oh, and something I may as well ask while you're around...;)

Quote:

---

Originally posted by SAE
I can do a 3dmark at 265MHz APIC on but I use clockgen to get it after booting at 262... it's the max you can get into windows.

---

Do you mean it's the most you can get into windows with, or that there's some limit for everyone? I've never heard of such a thing...:confused:

Quote:

---

Originally posted by SAE
Yeah. Many P4 users and some A64 owner :D ;)


What's worth it??? You can't even get 270 really 3dmark-stable at room temp. So it's of no practical use :confused:

---

ROFL :banana:

But has anyone done it with an AXP setup?

Quote:

---

Originally posted by Spec3
ROFL :banana:

But has anyone done it with an AXP setup?

---

Incase there is indeed anyone, this anyone is Lastviking ;)

Hello all, 1st post here, a few of my friends at PimpRig told me about your site, and have been surfing the Forums here for a bit, and stumbled on this thread...

So far Ive been able to benchmark and ORB a run at 262 BIOS, single channel, CPC off and APIC enabled.

DFI LAN PARTY Rev B
XP2500+ Mobile
GEIL PC4000 256MB
ANTEC TRUE CONTROL 550 WATT P/S
ATI 9600XT (Stock Settings)

Here is a link for my run at @264
http://service.futuremark.com/compare?2k1=7805108




http://forums.pimprig.com/attachment...chmentid=11660



I have also made a succesfull run at 266, but I can't ORB it, I lose my internet connection. I have been throught the forums looking for a fix, but nothing I have tried has worked yet.
I have disabled the onboard LAN and added a NIC card, that wasn't any help.

The board is stock for now, better NB and SB cooling are probably the only cure for it (Ordering a Micro Cool NB cooling kit tommorow)

I am also about to get a newer hard Drive, is a Raptor a good choice for high FSB, or would I be better off with an old style IDE drive?
I am sure one is better than the other when it comes to OS corruption issues, but I have not come across it in any threads yet.

Anyways..You guys have some wicked hardware here, and awesome Forums!

Quote:

---

Originally posted by SAE
Why did you hit your ram with such voltage-tortures ;) ?

Nice though :thumbsup:

Here's one at 2499 = 263x9,5 APIC on, cpc and all other stuff enabled :cool:

http://service.futuremark.com/compare?2k1=7787974

---

Because I like it!! :banana:

You should know better SAE ;)

Why am I not in the list? I have posted 260+ sandra and 260 3D :(

Quote:

---

Originally posted by Fewture
Because I like it!! :banana:

You should know better SAE ;)

Why am I not in the list? I have posted 260+ sandra and 260 3D :(

---

Yeah. I know ;) But 3,78V!?!? For only 260? :eek:

I love listings,

please note this :D

K7 AMD Dual Channel
http://members.home.nl/youpy/mem10t.jpg
A7N8X mobo
3.6 Vddr
2.5 Vdd :( needed for 250+

A64
http://members.home.nl/youpy/htt.jpg
Gigabyte K8N Pro mobo

My Abit AN7 in DC -->

Dang Necro looks like 300MHz FSB isn't too far away!!! :banana:

What kind of cooling is that on h2o or phase change?

~Bob

Can run mine @257 with cpc on @ 2-2-2-11 @3.3v.
And this is with mushie level 1 3500 which is CH-5
Oh this is dual channel with apic on

Quote:

---

Originally posted by enigma
Can run mine @257 with cpc on @ 2-2-2-11 @3.3v.
And this is with mushie level 1 3500 which is CH-5
Oh this is dual channel with apic on

---

Nice CH-5 there :thumbsup:

But you at least have to post a 3dmark2k1 link to become member of the list...

Quote:

---

Originally posted by yotomeczek
Another score from POLAND :D
245fsb 6-2-2-2 SINGLE
Mem - TwinMos CH-5 :D
http://service.futuremark.com/compare?2k1=7741673

---

Still ignored .... :mad:

Quote:

---

Originally posted by yotomeczek
Still ignored .... :mad:

---

Yeah. Tictac hasn't been here for at least 2 weeks :(

My 263 one dc, cpc on, apic on (bh-5) is not up there, too...

Quote:

---

Originally posted by SAE
Yeah. I know ;) But 3,78V!?!? For only 260? :eek:

---

To get it 3D stable yes.. :rolleyes:

my NF7 stock, with titan coolin in NB...
http://tirado.do.sapo.pt/fsb4.JPG
http://tirado.do.sapo.pt/fsb5.JPG
in DualChannel, muskin pc3200 lev2 powa.... and barton 2.5+

anybody here got mbot script....

HELP me update the ranking :P

Hi
I want to add my result to the list.
2X256Mb OCZ PC4200 (8-4-4-3-3), Abit NF7S ver 2.0, AMD Barton 2500+
Achieved FSB is 265MHz on dual channel.