I dunno Stephen, my Sabertooth has improper PWM at boot as well. I dunno if it's a 1155 thing or just a coincidence, but my processor spikes a fever at boot and then PWM takes over and it's OK.
Printable View
I dunno Stephen, my Sabertooth has improper PWM at boot as well. I dunno if it's a 1155 thing or just a coincidence, but my processor spikes a fever at boot and then PWM takes over and it's OK.
it really depends on the motherboards. having a fan or pump at full speed for 30s when booting isn't a huge deal and there isn't much of a fix other than setting up everything manually with a Fan controller.
I'm sure I can tinker with it in the ESA. It's still not like our old systems of pump relays, either. I just remind myself it could be so much worse...
I should be getting a sabertooth this week to verify this.
stay tuned
So Stephen,
Where can I order the ApogeeDrive II from? Available yet, or a few more days?
Stephen, when you test, mine doesn't start turning until right before loading windows. But, I'm using an nVidia ESA system to control everything, so it could be lag imparted there. If I unhook the system, the install goes wild, so I've just left it be (after it starts up, it's really great.) I've fired off a message to my buddy at ASUS to see if it's an implemented delay or it's something in my own system.
This must be on the Sabertooth Intel 1155 models because my Sabertooth FX990 does not do that once I set the fans to silent in the bios.
it's in transit currently. Should be another few more days.Quote:
Originally Posted by MrBean
Do you know whent he Helix fans will be available in Europe and where I should look to buy them?
Price?Quote:
Originally Posted by stephenswiftech
Send Bacata an email to know which resellers will carry the Helix.Quote:
Originally Posted by Nickel020
This will announced when the product is released.Quote:
Originally Posted by Utnorris
Did so, my French still isn't actually all that bad, even though it badly needs practice ;)Quote:
Originally Posted by stephenswiftech
Since you guys just got them in, when should I expect Bacata to get their first shipment?
Thanks!
Their shipment should be leaving within a few days.
Thanx Stephen, appreciated!
Will keep eyes peeled for this one - currently of to the cafe to buy a box of matches, should do the job nicely :rofl:
bump for Apogee Drive II!
Stephen, have they arrived? Have they?!!:shocked:Quote:
Originally Posted by stephenswiftech
are you impatient mate? :PQuote:
Originally Posted by phinix_mike
We all are.
How much patience are we talking here? 2-3 weeks or Duke Nukem Forever?Quote:
Originally Posted by gabe
...and as for the rest of the new products, maybe it's time someone from Swifty admit that the schedule was a little too. . .ambitious.
Not impatient. . .crackheads. . .and we need our respective fix's and we need them NOW!!!!!! :cussing:Quote:
Originally Posted by Trox
I would normally tell Mike to keep his kilt on but, I know what he's going through because I'm going bonkers about the rads.
I've dropped mine, and scared the crap out of my poor wife :(Quote:
I would normally tell Mike to keep his kilt on but
[QUOTE=Waterlogged;5098945]How much patience are we talking here? 2-3 weeks or Duke Nukem Forever?
...and as for the rest of the new products, maybe it's time someone from Swifty admit that the schedule was a little too. . .ambitious.
140/240 QP's: They're in transit right now.
As for the schedule, yes it was probably too ambitious. Products were ready for the most part but our machines/prod. line has just been too busy.
I think its time to call it Swiftech's new products for 2013...from 2012. I kid I kid.
The APD2 waterblock is scheduled for release on or about 5/18.Quote:
Originally Posted by Waterlogged
The MCRX40's radiators are scheduled for release on or about 5/25.
The Maelstrom bayres is expected to be released in June.
Lok-Seal 45's are available in black. 90's and Dual swivels are pushed back to 3rd week of May due to cosmetic issues that are being fixed.
Also upcoming by order of appearance (soon to late):
Komodo 7950 FC block
7970 & 7950 heatsinks
MCW82 "true contact" adapter kit for 7970/7950
7870 and 7850 heatsinks
GTX680 and 670 heatsinks
Thanx for the updates Stephen and Gabe :)
Eagerly awaiting the arrival of the APD2.