thanks, but, it's not the skin, it's the software....Quote:
Originally Posted by cole2109
I allready have the software.
I'm looking for the skin alone. :shrug:
edit : it works fine...thanks.
thanks, but, it's not the skin, it's the software....Quote:
Originally Posted by cole2109
I allready have the software.
I'm looking for the skin alone. :shrug:
edit : it works fine...thanks.
I installed this file and the skin was just like you want...
ok, I must desinstall then reinstall I think.
thanks.
I'm going to try this.
YES !!!!!
it works !!!
thanks a lot !!!!! :up: :bows:
I can only use setfsb to go beyond 476. Really stange.Quote:
Originally Posted by DemonEyez
anyway,
http://img216.imageshack.us/img216/7...85q9550gc7.jpg
cole2109...it works but there's a problem with my P35 DK T2RS :
http://i31.servimg.com/u/f31/11/51/44/49/snap0518.jpg
??
Well, it doesn't work with DFI P35.
It works only with the P45 board.
too bad. thank you nevertheless.
Thanks Pink and Cole2109 for the skin research, I'll try it as soon as possible. :D
Yes I'm also on Xtremesystem. :rolleyes:
About the DK-P45 T2RS, this mobo is so awesome (and so cute too), I had the opportunity to see many French tests and the conclusion is still very good.
EEPROM is still welded on the board ? When I had a DKP35-T2RS I killed it with flash fail... :down:
Slad, le skin marche pas avec les P35.
je viens d'essayer.
y'a un problème au niveau des options comme le montre mon screen au dessus.
how to use set fsb ?
CPUID’s Set FSB ver20.b.21f
(Clock IC : ICS 918JKLF )
I cant find the clock IC?
ver set fsb setfsb_2_1_73_0
Clock IC ICS9LPRS918JKL
:wave:
New beta bios 9/10 available for T2RS PLUS Link
Did they pull the beta bios?
Finally got to 600 fsb :
http://i14.photobucket.com/albums/a3...fsbsnipped.jpg
Having issues with vcore :confused:
I set 300mv (or different) in bios, but than the sensor (bios, cpuz, smartguardian) show vcore just 1.37V instead of 1.45V. What's wrong?
i'v had that issue to cole,not every boot but 1 out of 5...?
beta 910 is up still
http://us.dfi.com.tw/Support/Downloa...FLAG=B&SITE=US
No more problems with Vcore (new BIOS).
But now, i have a bigger problem. All 3DM score are very low (4-5k less in 05/06) and Crysis benchmark 10FPS drop (average).
What is the problem?
Thanks for the beta, Ill try it. Having issues with fsb atm, just killed my OS.
Wait that is for plus, is the a beta for JR? All I see is 08/12 still.
Someone???Quote:
Originally Posted by cole2109
Check in CPUZ the pcix link width. Sometimes it drops to x2. You have to adjust vNB to get it back to x16.
Hi, does anyone have F2-8800CL5D-4GBPI memory on this mobo? I would like to here some comments how it works
PCI-E looks fine 16×Quote:
Originally Posted by Blackoberst
:confused:
http://us.dfi.com.tw/Upload/BIOS/J245D912.zipQuote:
Originally Posted by Eldonko
Caution with vNB values in this new BIOS, it seems to mislabeled the voltages by almost +0.1v on my set! Entering 1.312v in the BIOS gives me 1.408v according to ITE Smart Guardian. Entering 1.408v gives 1.5V.
Conversely, my saved profile with 1.4075v vNB in the old BIOS is now read as 1.312v chosen in the new BIOS.
Another added feature - Vdroop Control is a new option.
Great, thank you, Ill load that tonight.
I've see the same overvoltage here (912)Quote:
Originally Posted by MacClipper
1,14V bios set -> 1,15
1,2 " -> 1,24
1,3 " -> 1,4
1,35 " -> 1,45
But this Jr perform really well...600 fsb orthos stable easy to get
DFI :clap::up:
Try adjusting vNB between 1.3v and 1.4v.Quote:
Originally Posted by cole2109
No overvolting for 912 with T2RS+.
615FSB Prime stable. :)