Offical Thread ASUS P5E3 DELUXE/WiFi-AP Problems, Workarounds, BIOS info.

Nitroburn,

I know you must be frustrated... I wish I could give you the key settings to make everything better, but unfortunately I'm not too familiar with the Qx9650 / Corsair Ram... I'm almost tempted to purchase the CPU.... I've seen allot of good results...

Questions
- Have you been updating your bios from your OS or Bio?
- What version of Bios are you currently using?
- What OS are you using?
- What's your Rams voltage range (For example mine is 1.75-1.85)

Now back to your problem...

Start from scratch... Clear RTC RAM / Reset Defaults / Reload v903 From Bios / Exit & Restart System.... Refer to manual for guidance....

Start OS with all default settings in place / check for stability.....

If everything works - go to the next step

Start Bios and enter the following settings

Ai Overclock Tuner: Manual
CPU Ratio Control: Manual
CPU Ratio Settings: 9
FSB Strap to North Bridge: Auto
FSB Frequency: 444
PCIE Frequency: Auto
DRAM Frequency: Auto
DRAM Command Rate: Auto
DRAM Timing Control: Auto
-------------------------------
CPU Voltage: 1.44
CPU PLL Voltage: Auto
FBS Termination Voltage: Auto
DRAM Voltage: Auto --- Try Auto First Then Insert 1.9
NB Voltage: Auto
SB Voltage: Auto
Clock Over-Charging Voltage: Auto
Load-Line Calibration: Enabled
CPU CTL Voltage Reference: Auto
NB GTL Voltage Reference: Auto
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
---------------------------------------
C1E Support: Disabled

Use Everest’s System Stability Test (let it run for about 20 -30 min - Keep track of your CPU Temps) and Provide the following information from the Lavalys Everest CPUID

Core Voltage
Memory Type
Memory Clock
DRAM: FSB Ratio

If your system is stable - make more manual adjustments... Keep track of all your changes for future ref..
.
Good Luck....

Here's a couple of pictures of my rig....

:up: :yepp: :up: Nice... Wow.. Thats a big case with lots of room... The things I could dooo..

Quote:

---

Originally Posted by malkiewicz

:up: :yepp: :up: Nice... Wow.. Thats a big case with lots of room... The things I could dooo..

---

Thanks, its a Silverstone J03, I put 120mm fan in the blowhole and on the sidewindow, MB temps are always around 31C, my old rig had sli and it kept the cards cool....:D

Ok..lets make this thread gallery...at the end..very nice photo's indeed...:rolleyes: :mad:

anyone done any high FSB testing with a dual core and different straps :confused:

i bought a mobo from OPB but it feels like a bit of a dog atm

i read the whole thread and it seems it can be pretty buggy with different bioses and i have 0601 on there myself. It's hard to get any idea what the best bios is from the thread and different posts but i can see that some people have had mixed luck with 0601

from my testing so far i was only able to do ~450MHz FSB with 266 strap, ~500MHz FSB with 333 strap and ~530MHz FSB with 400 strap (32M SuperPi stable) >>>> CPU: E6600

i stuck the chip in my favourite Gigabyte X38-DQ6 and boom 560-565MHz FSB 32M SuperPi stable on 333 strap as far as i can tell

how the hell is it possible that i cannot push the FSB to similar levels

RAM OCs are really bad for me too.......i cannot pass stock 900MHz 7-7-7-20 with my corsairs much.....on default settings in bios i can setfsb to about 920MHz 32M Stable.....maaaaaaaaybe even 930 but spotty. If i tighten the timings to 7-6-5-20 i cannot even pass 32M SuperPi at 900 even if i push the ram to 2.16v in bios WTF>>> this RAM easily does more than that at stock volts :(

has anyone measured the NB temps guys

my boards has a Swiftech 159cu on the NB and 100CFM fan blasting over the area. My idle temps on the base of the heatsink are ~40C and have gone as high as 49C with 1.51v at higher clocks testing ~4GHz or so

seems very hot considering gigabyte pretty much doesn't move from 35-37C during testing following asus (stock heatsink on Gigabyte too lol)

My opinion try the 0903 and test again..

yeah will do next ;)

problem solved

0903 is the bomb! :D

http://img179.imageshack.us/img179/7...0903biodp9.png

Bravo Dino !...good news..:)

..yes it is..! until next..bomb..:p:

560 ok too

so basically bios confirmed issue :)

http://img297.imageshack.us/img297/1...0903biovr4.png

I made it too.... I have FSB limit.....

Happy New Year!!!!!!!!!!!!!!!!

Maybe I should try v903.....

http://img99.imageshack.us/img99/227...pimult9mb0.jpg
http://img99.imageshack.us/img99/186...ult932mvw4.jpg
http://img99.imageshack.us/img99/5729/superoy5.jpg

Happy new year everybody from me too :)
Yes 0903 is the best till now..the only thing is that my ram needs 1.9v instead of 1.8 to load defaults..maybe its bios issue..wil see..

Happy New Year

:toast: :toast: :toast:

Anyone know when the QX9770 & QX9775 are going to be released????

Happy New Year!!!!

903

does anyone know how much voltage i need at 9x450 for QX9650? I'm asking cuz running 903 BIOS right now i don't think this version of BIOS is stable either... maybe its a RAM issue, cant this board run 1800Mhz RAM from corsair at 1800Mhz?

Quote:

---

Originally Posted by hirantha

does anyone know how much voltage i need at 9x450 for QX9650? I'm asking cuz running 903 BIOS right now i don't think this version of BIOS is stable either... maybe its a RAM issue, cant this board run 1800Mhz RAM from corsair at 1800Mhz?

---

my one runs it no worries at all

i benched as high as 950 cas7 2.16v

Quote:

---

Originally Posted by dinos22

my one runs it no worries at all

i benched as high as 950 cas7 2.16v

---

you run your RAM at 1.8Ghz? at 1.8Ghz as stated in the RAM sticks, 2.0v is not enough?

2v is perfectly fine on every mobo i tried at 900

up to about 930 actually

has anyone figured out how to go back to older bioses
i want to test 0503 as it seems to be clocking these corsairs well in bachus's benches

btw guys for those of us that need higher vcore IT IS actually possible through BIOS (no shlt) but Asus won't do it.................someone did a review on a board with A REALLY EARLY bios which had vcore up to 2.35v ;) which later disappeared with newer bios updates heh

I just use a USB stick.. put the bios on the stick that you want, and insert and boot up, hit alt + F2 if I recall correctly, and you can choose the bios to install.

Dont forget to clear CMOS, after .. remove power and battery for 15min etc.. then reboot and default .

i haven't actually tried myself but some users here that have reported that the mobo will not upgrade to older bioses if you have 704 or later bios heh

hence why i ask