I have to reroute and rebraze ALL of them :o
Printable View
I have to reroute and rebraze ALL of them :o
i have done what you are doing and it is tough....Quote:
Originally posted by berkut
I have to reroute and rebraze ALL of them :o
good luck my friend and take your time or you will have lots of small leaks.
u gata be kiddin me u gata take all the elbows off and re braze them in a diff spot?
The future condenser assembly + base :>
Ok some more info on the condenser assembly...
Its the evaporator part from a split A/C system, its extremely quiet and has quite an airflow... had to mod it a little (Diax 0wnZ :D)
Forst a closeup on the fan itself
Heres the upper plate used for mounting purposes
I couldnt find any suitable screws so i made some ^^
You must have noticed my dirty keyboard, sorry for that ^^ It survived many things like flooding with acetone (dissolves plastic), soup, cocacola etc.
A knother shot on the condenser assembly, you can se the I stage compressor on it
Heres a closeup on the seals i used to prevent air from leaking from the condenser, its normal neoprene pipe isolation
Man.....this is really getting good! Keep up the great work! :D
:toast:
Your wish is my command ;]
The glue i used to mount my exchanger and connect styrofoam with wood
The 99% final configuration
Where do you sleep? :D
I dont sleep ^^
im on the finish with this cascade, everything will be done exept the evap and its surroundings (injecting system etc.)
i wish i new how this was going to work lol i have folowed this thread since the begginin and still duno how its going to work...
Ok, some more info...
I finished the I stage, need to do a duct for the compressor cause it got >60C after 2-3min of work :o
I use a 00X valve on that TXV, maybe tomorrow ill change it to a 0X cause 00X is much to small...but it works ;]
Closeup on the filter (im gonna change it too cause its wet)
Temp after 2min of work
Forgot to say smth. about presures...
Its 200 psi on the high side, 0 on the low, 31-32C ambient...
Here's the wirering for the II stage and the I stages fan...
Mounting II stages compressor
I think theres a curse on me that doesent let me finish this cascade... Just when i had these temps no prob the pipe leaving the txv broke off...
That really sux man, but I guess better that it happened now than later.
keep on truckin...you are almost there :D
Ok, got rod pf the leak and its rockin again ;] God bless brazing and flaring tools ;] Some pics in a moment ;]
And a next scene in my movie about my cascade
Ok, smth off topic, a coil or how is it called for the II stage... It will be conected in such a way that it will be turned on with one switch (just click and it works; it will give power to the coil, it turns on the II stage compressor and powers itself) and it will work as long as the whole system will be powered, when i turn everything off the coil cuts off power to the compressor and itself and wont turn on untill i wont press the button ;] So theres no way i can turn everything on with the same switch ;]
Ah and BTW, ive got -42C on the exchanger ;]