Link is down , i know im a little late hehe, can someone please send me the drivers PLEASEEE, big sam ajrrftlmiami@yahoo.com
Printable View
Link is down , i know im a little late hehe, can someone please send me the drivers PLEASEEE, big sam ajrrftlmiami@yahoo.com
have you see this?Quote:
Originally Posted by Ajfina
http://www.xtremesystems.org/forums/...&postcount=266
Quote:
Originally Posted by Ajfina
http://www.xtremesystems.org/forums/...&postcount=131
http://www.xtremesystems.org/forums/...&postcount=198
Hi. This is the qmail-send program at mail.gmx.net.Quote:
Originally Posted by Ajfina
I'm afraid I wasn't able to deliver your message to the following addresses.
This is a permanent error; I've given up. Sorry it didn't work out.
<ajrrftlmiami@yahoo.com>:
I´ve heard that Nvidia is going to release new driver within few next weeks that supports officaly SLI on intel chipsets :)
What chipsets concrete? :)Quote:
Originally Posted by BulldogPO
Intel has many chipsets capable to support SLi. It is 915, 945, 955, 965, 975 and their modifications...
Already now in drivers there is an official support for four intel chipsets. :D
Hey Big Sam, I suddenly realised that this might be the more appropriate thread to post my 'missing RAM problem' cos I am using your modded 85.96 SLI driver on my Asus mobo. Had posted for help around but no one seems to be able to pin down the problem so here goes again...
Just tried out SLI (2 x el cheapo 7300GTs) for the 1st time on my P5W the past week and noticed certain strange quirks about RAM being reported differently by the mobo, Windows and CPU-Z.
Installed is 2 x 1 GB sticks = 2048MB - everything reported OK without SLI. With SLI, the mobo POST reports as 1920MB (OK, kind of expected), Windows as 1.6GB (WTH, @%%!) while CPU-Z maintained at 2048MB.
Is something being configured wrongly? Looked around but can't seem to find a good answer, TIA.
http://img115.imageshack.us/img115/3...pertiesmk1.pnghttp://img115.imageshack.us/img115/8917/cpuzramih2.png
PS: regarding the RAM timings - still have to run my RAM at SPD on my P5W mobo till now.
can u do SLI with only one card?
SLI stands for Scalable Link Interface. The entire point of it is to link together two gpus and have them work together efficiently. The 7950 GX2 uses a single slot, but still uses SLI because it's linking two gpus together.Quote:
Originally Posted by Ajfina
So yes, you can do SLI with only one card, but you need to have two gpus on that one card. SLI is also patented by nVidia, so if you linked together two ATI cards, you'll have what's called a "CrossFire" setup, not SLI.
MacClipper, did you try other drivers, 84.66 for example ?
hi Big Sam, after more troubleshooting, I am convinced that the problem does not seem to lie with the 85.96 drivers cos I booted into another XP partition which had my previous video card installed viz. a X800GT and it came up with new card install prompt, I canceled it and Win XP still reads 1.62GB ie. 85.96 not installed, missing RAM problem exists.
A really strange problem, Shamino also tried to troubleshoot with me over here but no answers yet,
http://forums.vr-zone.com/showthread.php?t=94883
In short, problem exists only if I put in 2 x 7300GT AND 2 x 1GB RAM sticks. The other combinations that I have tried (2 cards/1 stick, 1 card/2 sticks...), the RAM is reported correctly.
PS: great work, Big Sam. Looking forward to your next mod masterpiece. :)
MacClipper
I have absolutely forgotten about it - NVIDIA® TurboCache™ Technology - http://www.nvidia.com/page/turbocache.html
LoL :D
Someone did ask about TC but erm AFAIK, the 7300GT DDR3 does not use TC or am I wrong here?
Any updates for the 7950GX2 people ?
No they dont use turbi cache for sure.Quote:
Originally Posted by MacClipper
I have similar problems with a Asus A8n Deluxe. It has 3*512MB of ram and once I start setting the fsb to anything other than auto, Windows reports 1024MB of ram, CPU-Z still says 1500, but I think it checks every ram slot for ram and adds it, so only 1024mb might be usable. Havent found a fix for this yet.
Try running stock settings to see if the problem still exists.
Did try everything at stock, still missing RAM. In fact, I just swapped one of the 7300GT cards (the one which tends to run 5C hotter) with the vendor and came back to install the replacement - no improvement.
Looks like no way out but to try a completely clean OS install on a spare HD to see if it helps. I fear that even that might not help cos the OS seems OK - with 1 x 1GB with 2 cards or full RAM detection with 1 video card.
thanks bro, i only have a 7600GT KO for now , need to buy another one , waiting on the 590 SLIQuote:
Originally Posted by Seolfor
Where did you hear this? Would be nice, but I doubt it. I get a few major issues using the modded 85.96's... Currently using the 84sQuote:
Originally Posted by BulldogPO
I cant tell my source, but I´m hoping for that move from Nvidia :)
Story tells that they are going to enable it in few weeks for intel 945, 955X, 963Q/G, 965P/Q/G, 975X chipsets.
It would be simply fine, but I believe in it with the big doubt. :DQuote:
Originally Posted by BulldogPO
There is a SLi support for two 945 chipsets in drivers already now.
It does somewhat make sense at least. The Nforce 590 mobo with C19 chipset should hit retail sometime before october. The people who wanted official SLI support will go for that, then once demand dies down nvidia may release the official drivers.Quote:
Originally Posted by BulldogPO
It about time nVidia decided to step over that 'legal line'.
Sorry if this has been asked, but is anyone working on 91.XX modified drivers?
Hai guys,
Iam new here, and also kind of a Noob :)
Now i got a intel core2duo (e6600) Asus p5w dh deluxe with 2x 7900 GS for SLI. I also downloaded the 85.96 moded drivers and installed them. At the moment i dont have a SLI bridge (is on the way ordered it).
Now when iam running in SLI with the mod drivers and i run a game al i see is a black screen. But iam hearing the sound of the its just that i dont see it. Ok i figured it out the it the Nvidia profiles you need to make a profile if that game isnt listed. (o yeah the game is Fifa 07 but it also happens with NFS MW) any way in the profile i set it to SLI and Mutli GPU. Wat i then get is Half a screen where i can see the game but when i advance in the game that screen get smaller and smaller eventually i see that the upper half is black and the under half has all kinds of collors. Now iam need to know why cant i play games in SLI ? i tried every driver what was here in these forum. also the older ones but same result. I dont think my problem will be fixed with ONLY a SLI bridge. it must be something else
I will typ my pc Spec so that you guys know what i have:
Intel Core 2 Duo (E6600) 2,40ghz
1024 DDRII at 6400
Asus P5w DH Deluxe
My PSU is a Coolermaster 550W SLI Ready so that should be the problem also.
2x asus 7900 GS both the same cards. (Also tried to run both cards on the same speed with Coolbits)
Please guys i realy hope you can help me i dont know what to do now?
Ok Guys forget about this :) fixed it. It seems it doesnt work properly with out a Sli bridge. Got the Flex sli bridge from asus. And it works now actually.Quote:
Originally Posted by GoGo21
Now can i just play games or is there some stuff i need to do with the Game profiles ? like i said in the beginning iam a bit of a Noob with SLI....