And I suppose there was a little ln2 in the pot, lets say 0.5-1cm of ln2 on the bottom of the pot.Quote:
Originally Posted by luihed
Printable View
And I suppose there was a little ln2 in the pot, lets say 0.5-1cm of ln2 on the bottom of the pot.Quote:
Originally Posted by luihed
yeah.... Its alot different than I though cos to reach say -120c, I had to fill the pot maybe 5-6 times or maybe more from the start.... then when I reached that temperature, even if there was no ln2 in the pot the temperature stayed there and I just splash a lil to maintain it.... With all the smoke I cant really tell how much ln2 is there but I think my pot is very slow..... I was trying to be in a 5c range but i was more in the 10c range cos sometimes i pour too much and the temp will go down too much..... I was only practising so I wasnt near my coldbug, I got as cold as -140c and still my e6600 was running..... for pactice I try to stay between -115c to -120c.....
I am also thinking that I made an error in my pot design, The bottom is 48cm wide and even though I drilled a hole thats deep for the probe, it might still be too far from the core to read accurately....
Sorry for the OT guys..
Nice job Luihed, wish I didn't have to sell my e6600 before getting a dewar. My last dry ice run was the same way, first run was the best and after that nothing but problems. Didn't get any tweaking at all, just one run to see if it was stable and after that it was a no go.
@luihed, congratulations on your 9.xx run. You seem to have taken to this 32m very well. Nice work.
@Gautam, I tried but results were poor. My board started acting up. I thought it may be condensation on NB but everything is coated well and was safe in that respect. At least it is starting to get back. (I can boot up to win and do 32m @ default) Still trouble with getting volts up. I'm not sure what happened but it was kind of severe.
@druchii, I'm sure you would like to try to get a better run to post. So much information here to use. I'm confident with some more effort you will do better.
I'll do better, just need to get this rig setup properly. Might dedicate Monday or Tuesday to tweaking the hell out of it, use one of the overnights to see if my Geil can do CAS4 @ 900Mhz. Maybe she can with 2.2v. My CPU is on it's edge though, any more and she falls, sadly (Due to heat, and what i can only guess is a crap power supply) Thanks though :)Quote:
Originally Posted by coop
19.xx.xx Entry
E6600 @ 2287mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400
http://img294.imageshack.us/img294/5...teditedbd2.png
:brick: Sucks to hear. Were you trying to subzero cool your northbridge?Quote:
Originally Posted by coop
Thanks coop and stapler....
nice run DJSUB :).... starting to show some nice times.....
tnx fafs :D
i'm still hoping to get better score nxt time :D
giving 2:3 a go on the 965-s
18.xx.xx Entry
E6600 @ 2405mhz
DFI Infinity 965
Team Xtreem 2x512MB PC6400
http://img376.imageshack.us/img376/6...memseterv8.png
Gautam, no, but I use cold water and if I run too long it forms condensation around the NB block. NB chip is painted though and I have fans on it. I think it started during the time I was working on the 12.xx and finally broke down. I checked my rams each as it would only boot with one at first.
Nice run hadji a.
17.xx.xx Entry
E6600 @ 2573mhz
DFI Infinity 965
Team Xtreem 4x512MB PC6400
http://img412.imageshack.us/img412/4...zmemsetqn6.png
11.xx entry..
http://ocidb.com/albums/userpics/10062/normal_11_xx.PNG
closest miss ive had so far.... just couldnt get that lil bit to improve my score....
http://ocidb.com/albums/userpics/100...al_xx12_xx.PNG
Very nice
Updated. Been busy, got rid of one of my DFI NF4 computers and put my QuadGT out to pasture, it is under a Tuniq Tower now. http://img361.imageshack.us/img361/9...0721mh1.th.jpg
Am looking forward to setting up the P5KE.
what?!?! your monster QuadGT isn't going to be 'racing' anymore and has been retired to stud? i thought you were going to sell it to me when you were done benching ;)Quote:
Originally Posted by coop
i'll trade ya my P5B-Dlx (vCORE, vMCH mods & a little bit of sticky stuff around the socket) for it if your interested...LMK.
Just some testings.....with the ASUS Blitz Formula...:)
http://www.hipro-tech.com/images/hip..._618rams_1.png
http://www.hipro-tech.com/images/hip..._618rams_2.png
http://www.hipro-tech.com/images/hip..._618rams_3.png
http://www.hipro-tech.com/images/hip..._618rams_4.png
running ram at that speed helps a lot :D :up: :clap:
Great work!! Tras-2 is the best in Asus Blitz?:rolleyes: hmm,interesting..Quote:
Originally Posted by hipro5
This is with my Tweaked for Super-Pi HDs..... :)
PATA HDs Western Digital 80GB.....One HD for the Windows and one HD for the Page File.... ;)
Sorry Fredyama my friend.... :(
....and yes......ASUS Blitz Formula IS VERY FAST......;)
http://www.hipro-tech.com/images/hip..._618rams_1.png
http://www.hipro-tech.com/images/hip..._618rams_2.png
http://www.hipro-tech.com/images/hip..._618rams_3.png
It seems that the "older" cpuz didn't read the right tRAS in the above picture.....It is 2 and not 5 as it says.....
http://www.hipro-tech.com/images/hip..._618rams_4.png
You got me. :(
I'll get my hands on this board soon too for sure. :D Well...that is given that normal people are allowed to get their hands on it before X38's debut...
Untweaked XP pro sp1. All processes still running.
[QUOTE=hipro5;2324588]
Sorry Fredyama my friend.... :(
No problem hipro5-san because you are not the one:D;)
Congrats on your awesome time:clap: :clap: :clap: :toast:
[QUOTE=fredyama;2327139]:D :rofl:Quote:
Originally Posted by hipro5
Hehe hipro The Blitz is fast, but also the p5k dlx is not bad:D
P5k dlx
e6600@515x7
teamgroup 9600 5:6
Attachment 62082
Quote:
Originally Posted by gandalfone
Heh, heh.........same chipset..... :p:
You work with 2k3 or XP....?
Quote:
Originally Posted by hipro5
:D
Win2k3;)
PS: which max Vcore and Vmem give the blitz??
Thz
Not fast or tweaked ... :D
http://www.xtremesystems.org/forums/...1&d=1185364007
http://img512.imageshack.us/img512/9...3374kr4.th.jpg
3374.3......JMKS...............13.59.297.....7x482 .....602mhz.....4-4-4-4.....4/5...P35
edit:
http://img517.imageshack.us/img517/3...3129fo2.th.jpg
3129......JMKS...............14.59.172.....7x447 .....670mhz.....5-5-4-4.....2/3...P35
2,55V also and it is near end of that RAM - tRFC 35; 30 was unstable ;)
Allendale of course
2,55V RAM
Training with P35 and some fine RAM :)
14.xx entry
http://ocidb.com/albums/userpics/10062/normal_14_57.png
The blitz is pretty fast but the IP35 pro is also not too bad:D ....
http://ocidb.com/albums/userpics/10062/3605.png
Welcome to the new members (and old) making contributions to the thread. Thank you. If your time did not get posted please make another run at a lower core speed or a higher time bracket to be closer to the speeds already posted in that catagory so we can keep the range as narrow as possible.
Asus p5k3 dlx
TeamGroup DDR3 1600
win2k3
Attachment 62470
Finally i've got a decent hw for some low clock challenge...
15'59"@2807.4mhz
http://www.pctuner.info/up/results/_...06mhzsub16.jpg
14'59"@3015.5mhz
http://www.pctuner.info/up/results/_...15mhzsub15.jpg
E6600-P5K DLX-CELL SHOCK 1000C4
p5k3 dlx
teamgroup ddr3 1600
e6600
win2k3
Attachment 62492
update for 13.xx category
cooling : Dry Ice
CPU : E6700 L633A549 #7
Mobo : ASUS P5K
Mem : Team Xteem PC2-8500 C4
MAXMEM=600
rig is here
http://homepage2.nifty.com/NewBeetle/12xx_12m52s468.png
:eek:
That is just not fair! :lol:
Excellent time NewBeetle-san, you are the master of CPU and FSB clocks. :toast:
Hi, Gautam-san. :)Quote:
Originally Posted by Gautam
I think so, too!!! :p:
I want a CPU that works by FSB600 as for the normal temperature. :D
DEWA DEWA ～
NewBeetle
Wow chris.....great time with that Mhz!!!! Yours O.S. is the best for me;)
Thx,i think it's a good os like your but not the best :)Quote:
Originally Posted by gandalfone
Quote:
Originally Posted by C.h.r.i.s
mmm....ok...the scores are here, you con see that. what's the best chris??:D ;)
Have you tried 15' & 14' with the same settings and timings?Quote:
Originally Posted by gandalfone
Quote:
Originally Posted by NewBeetle
Very great time Newbeetle-san, fast as Skyline:D :up:
Maybe 3540Mhz enough for sub 13min?
3600 * [12*60+52.468] / [13*60] = ~3565MHz => it can be lowest sub13, faster than that DDR3 runs :yepp: - in fact just miliseconds different than gandalfone DDR3 result ;) - clock for clock that runs are almost identical :)Quote:
Originally Posted by over@locker886
3540MHz (or lower ;)) possible with DDR3 590x6 2:3 :D
I'm here. Some distractions of late. I will update times on 8/7, S2G. I have been able to play with p5k finally and am working on sub 13. So far 13.01 @ 3612. No vmods right now and I can't get mem down to cas4 over 600. From the post above I could of picked a better catagory. Very nice runs.
http://img467.imageshack.us/img467/1...3612tp1.th.jpg
p5k
e6600 @ air
crucial ballistix 8500
13'59"@3281.8mhz
http://www.pctuner.info/up/results/_..._13.59.750.JPG
^^ nevermind your 'orrible' english. Your screen gets your message across very well. Good time.
As for me, the sub 13@ 3600 or less is still not to be. I was able to fix up a 'clip on' vddr mod. The best I've got so far. I shorted my board starting it, and had to go by a new one. http://img207.imageshack.us/img207/8804/1259812cl0.jpg
WOOT WOOT frick frack forking WOOT
Finally got there. Retail 0201 bios
My Crucial 8500's (2.82v) :D
MaxMEM=580 waza=1gb PageFile=512mb
It seems to be able to "breathe" better with looser timings. Much better.
lol, about time. :p:
^^ thank you :) got another one.
pagefile 1023 maxmem 600 2.70vdimm 1gb waz
http://img292.imageshack.us/img292/6/1257375wb5.jpg
Stock cooling
P5k-e/wifi
Vdimm mod
:)
^^ that is the same board/mod I'm using but with water cooling. http://img170.imageshack.us/img170/4678/1459937bky5.jpg
Nice run guys... congrats coop on breaking 13m :) ...
quick test with P35
http://img487.imageshack.us/img487/9...in2250sqc9.jpg
^^ Damn nice fsb.
Thanks, Vapo LS was on CPU:DQuote:
Originally Posted by coop
here's a tweaked run with my e6850 :D
p5k vanilla ballistix 8500
http://img130.imageshack.us/img130/7...oodnessgv0.png
You've wandered into my turf now. . ;)
M/B Asus Blitz Formula (no mod)
Vcore 1,72Volt
CPU Cooling ln2 (-100) on Gorillakos POT rev.1.03
CPU Core2 E6700 (L633A549)-(Thanks Tanaka-san)
Memory TeamXtreem 1200 C5 (2,66Volt)
VFSB 1.4Volt
NB 1.55Volt
SB 1.175Volt
CPU PLL AUTO
OS: WIN XP32
Copy-waza 1GB
MaxMem 640MB
http://i164.photobucket.com/albums/u...2-51-5_gpr.jpg
Sorry my friend Tanaka-san and Hipro-san.
I am sure the next one of you, will be better....:up:
:clap:
M/B Asus Blitz Formula (Vcore mod only) (tsan's)
Vcore 1,78Volt
CPU Cooling ln2 (-100) on Gorillakos POT rev.1.03
CPU Core2 E6700 (L633A549)
Memory TeamXtreem 1200 C5 (2,71Volt)
VFSB 1.48Volt
NB 1.64Volt
SB 1.2Volt
CPU PLL 2Volt (max bios)
OS: WIN XP32
Copy-waza 1GB
MaxMem 640MB
http://i164.photobucket.com/albums/u..._12-51-078.jpg
Mine first in benching life 32M :p: Not tweaked, only waza and maxmem 500. Mem can do the same clocks with level 7 but not much time to next run.
Blitz Formula
Ballistix 800
Dual stage cascade
FSB wall at 540MHz :rofl:
Result on strap 333MHz.
http://images23.fotosik.pl/78/afbfa5813c88d5b6.jpg
Martin :)
DDR3 PURE POWER...... :D :p:
ASUS Blitz Extreme.....CellShock DDR3 PC14400 Ram Modules.....:)
http://www.hipro-tech.com/images/hip...1029rams_1.png
http://www.hipro-tech.com/images/hip...1029rams_2.png
http://www.hipro-tech.com/images/hip...1029rams_3.png
woah man that destroyed nearly everything :D
vdimm used ?
Respect to my teacher…..:clap:
Now THIS is how DDR3 is meant to be run. :clap:
Thanks guys..... :D
Vdimm and compare = HERE....... :)
here are a few results from me, really sucky cpu clock, but im just testing some tweaks and subtimings,
im going to change to x6800 tomorrow and run with fsb500 and mem over 600 and hope for a good time :D
here it is a 3ghz 32M time with low FSB
VMEM: 2.55v
http://aycu06.webshots.com/image/258...5778600_rs.jpg
i have one more result with higher FSB and another CPU
http://aycu35.webshots.com/image/281...7621681_rs.jpg
Finally we got memory which can work divided :) (2:3), not only synchro (514x7). Results:
http://img215.imageshack.us/img215/3...038copynx8.png
http://img76.imageshack.us/img76/466...043copyzk1.png
HI everyone , i am a new member here
I want to share my result to you
12m 06s @ SuperPI 32M @ 4GHz
Thanks OnePagebook , Everything about SuperPi Tweak , i learned from Him
http://xs319.xs.to/xs319/07380/4G.JPG
11.xx Entry
4050MHz、11m 57s
http://xs119.xs.to/xs119/07380/4050.JPG
Another entry with help from OPB.
http://bandwidth.se/imgs/nouser/3ghz14m5974d9dfae8.jpg
Finally broke sub 12min at <4000Mhz !
11m 59.656s @3996.7Mhz = 2864259.04 efficency :)
Used Maxmem = 615 with my custom fresh WinXP Pro SP2 nLite install :D
http://fileshosts.com/intel/DFI/DFI_...s_maxme615.png
http://fileshosts.com/intel/DFI/DFI_...-bandwidth.png
Finally I think it's time for you to move to DDR3...... ;) :p:Quote:
Originally Posted by eva2000
not much use right now when my DDR3 Blitz Extreme is limited to 485-493FSB for cpus that can do 530FSB on Blitz Formula/Commando heheQuote:
Originally Posted by hipro5
DDR3 needs high FSB capable cpus to really shine!
i thought i had my 32M SPi OS down to be as good as anyone but clearly i have a good couple seconds worth of work to do. time to start from scratch and try to find those last couple of seconds. my hats off to BA and gandalfone. all three of us with the same setups pretty much but they are clearly better than me at this point :up:
E6600 (L629B383) 7 x 510 (boot from bios)
Thermalright Ultra-120 (CPU cooling)
Asus P5K3-Dlx (stock cooling, thermal paste hasn't even been changed)
Crucial Ballistix PC3-12800 2x1GB - the star of the show
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
Win2K3 SP1 (custom nLite'nd job)
realtime / core 1
maxmem = 615
copywazza = 750MB (single folder w/750x1MB files in individual folders) from C:\ > Z:\ - Z:\ > C:\ - C:\ > Z:\
eram 2.11 (Z:\) - about 1GB in size running SPi
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = Custom (Init - 512MB Max - 512MB)
plenty of services disabled but not all
reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)
3570.0MHz SPi 32M = 12m 59.984s
click for full size including memset...
http://img.photobucket.com/albums/v2...5x_32m-1sm.png
Just when I caught up to your previous 12m 53.9xx run lol
System:
- Intel Core 2 Duo E6600 L709A958
- Corsair Nautilus 500 H20
- Asus P5K3 Deluxe 0604 official bios
- 128MB Gainward FX5200 PCI
- 2x1GB Crucial Ballistix PC3-12800 DDR3-1600 8-8-8-20 at 1.8v rated dual channel kit
- 74GB WD Raptor 8MB
- LiteOn 165H DVD Burner
- Sony FDD
- 1KW PCP%C SLI PSU
- WinXP Pro SP2 Luna Royale Blue themed with nLite + RyanVM updates
7x514FSB 3:5 856Mhz 7-6-5-15 1T at 2.00v bios set
I finally broke the sub 13min Super Pi 32M barrier at <3600Mhz and when I mean broke, I mean I slashed 8.25 seconds of my previous personal time of 13min 02.094s! :D
I needed 2.0v vdimm as 1.95v vdimm resulted in memtest86+ v1.70 errors (4 errors at test #5 looping).
How's 12m 53.844s for 32M with WinXP Pro SP2 fully updated with no maxmem tweaks at all!
http://fileshosts.com/intel/Asus/P5K...844ms_full.png
http://fileshosts.com/intel/Asus/P5K..._bandwidth.png
Now I wonder if I can go sub 12m 50s for 32M at <3600Mhz ? :)
For now set RAS to CAS Write delay in memset from 6 to 3 and squeezed out 0.906 seconds faster 32M time :D
http://fileshosts.com/intel/Asus/P5K...8ms_memset.png
You see!.....I told you to go to DDR3..... ;) :D :p:Quote:
Originally Posted by eva2000
now do it properly and go for 509*7 under 13m...you should be mighty close if not already there. i expect an update in 12min 59sec ;)Quote:
Originally Posted by eva2000
yeah DDR3 helped for sure :DQuote:
Originally Posted by hipro5
something to aim for I guess :DQuote:
Originally Posted by 3oh6
nice work george
dusted off the phase this afternoon and went straight for the sub 11min category. there is still plenty of time left to shave off with this setup. i couldn't get 550*8 to run with the 3:5 ratio (200 strap) for 913MHz so i had to settle for the 5:8 (333 strap) and 875MHz. on top of that...my P5K3-Dlx won't be running 550FSB PL7 until it receives some 'help' so PL8 would have to do for now. be sure that i will be back in this category after some mods at PL7 ;)
E6600 (L629B383) 8 x 547 (boot from bios)
Chilly1 SS (CPU cooling)
Asus P5K3-Dlx (stock cooling, thermal paste hasn't even been changed)
Crucial Ballistix PC3-12800 2x1GB - the star of the show
Biostar 8600GTS 512MB
Seagate 7200.9 80GB SATA2 (20GB partition for OS/programs/page file)
Silverstone Zeus ST56ZF 560W
Win2K3 SP1 (custom nLite'nd job)
realtime / core 1
maxmem = 615
copywazza = 1GB (single folder w/10XXx1MB files in individual folders) from C:\ > Z:\ - Z:\ > C:\ - C:\ > Z:\
eram 2.11 (Z:\) - about 1.1GB in size running SPi
visual effects all off
memory usage = "System cache"
processor scheduling = "Programs"
page file = Custom (Init - 1024MB Max - 1024MB)
plenty of services disabled but not all
reg tweaks:
"EnableSuperfetch"=dword:00000001
"DisablePagingExecutive"=dword:00000001
"LargeSystemCache"=dword:00000001
"ClearPageFileAtShutdown"=dword:00000001
(there may be a couple more of the NTFS reg tweaks in there as well)
4375.6MHz SPi 32M = 10m 59.422s
click for full size including memset...
http://img.photobucket.com/albums/v2...5x_32m-1sm.png
I did vmch mod, maybe it will help for higher Mhz with PL7 ,but not:(Quote:
Originally Posted by 3oh6
Great job:up:
was just studying Gautam's runs and it is very interesting to see how big the CPU MHz gaps start to emerge as you push into categories past sub 13m :)
http://img231.imageshack.us/img231/4...oard011rn3.png
we are talking about ~550-580MHz difference for 9.xx category and probably 650Mhz for 8.xx category :shocked: wow
it would be so nice if someone smarter or less lazy than me could figure out the efficiency formula that has no bias :( so we can compare relative performance on any clock
improved my 12.xx time a little :) :D
http://img406.imageshack.us/img406/3...1750mhzsm8.png
i am VERY CLOSE to a nice 9.xx category entry :D (CPU FSB is preventing me from clocking higher so i will have to tweak out those last few seconds :D)
http://img403.imageshack.us/img403/5...i171vsshj5.png
Good stuff dinos :D
my fastest sub 12min time to date @3959.9Mhz :D
http://fileshosts.com/intel/Asus/P5K...1m59s906ms.png
nice going there george
i will give you a run for your money on Gigabyte with 650+ on RAM for 11.xx category :D
Yep, since its inverse proportional, you'll always need more and more MHz for the same absolute time difference. I don't think there's any way to have such a formula. We can compare efficiencies at a given set multiplier/ratio/timings, but once those variables are changed, the efficiency will as well. When I was doing those runs I usually eyeballed efficiencies at the next multiplier step by adding the difference in performance product between the previous two, but that turns out to be too optimistic and is better for nothing but a rough rough estimate.Quote:
Originally Posted by dinos22
You guys are all making me damned jealous, nice to see all this action going on. Love seeing 3ho6 right at the 59.984 mark for 12.xx--that's the sign of a totally squeezed setup. :D I wish I had the time to do 32m runs on P35, you'd crap if you saw the kind of mem speeds I was seeing. :p: DDR3 is def where its at now tho...keep defending DDR2's honor nonetheless dinos. ;)
hello, i'm newbie here..this is my result
http://i242.photobucket.com/albums/f...556/32M15m.png
http://valid.x86-secret.com/show_oc.php?id=251660
Hey Gautam,Quote:
Originally Posted by Gautam
Give us a taste of what rediculous memspeeds you're looking at atm, please?
http://img209.imageshack.us/img209/9...9m56984zk8.png
Here's my humble contribution for the 9.xx club. Did it this afternoon while testing the cascade. Guess it could be faster; but it's not a too bad one actually. :)
Was looking at is appropriate...all I have saved from about a month ago is this. :-/ Bear in mind that 05 is quite a bit harder to pass than 32M, I was around 675 5-5-4 and 660 give or take 5-4-4 but both of them were lacking in perf so I didn't bother with them and didn't take screenies...now that I think about it it would've looked nice. :p: 1M was around 700 5-5-5 in dual channel. Of course voltage was about 2.8v for everything. Right now I have nothing but a couple of sets of ram, a video card, a hard drive and a psu. No CPU or mobo. :DQuote:
Originally Posted by Zeus
Very nice my friend, seems like 5075MHz or so could've done the job. :toast:Quote:
Originally Posted by before
determined here to open up a 8.xx category
fingers crossed if everything works out to plan on Atomic Live our team will have a nice little time for some droolage action....my E6700 can do the clocks we need :D:D:D:D:D:D: :eek: :D:up:, got plenty of capable mobos and RAM so just luck necessary now
more to come soon fellas :up:
What do you reckon it takes on your E6700? At least 5.5GHz i'd say with 600 on the rams or am i wrong?