WELL.......NOW guess what THIS does....Warning 56K / photos...

Printable View

Show 100 post(s) from this thread on one page

07-17-2006, 01:19 AM
nop

sweet hipro :slobber: :slobber:

btw, do you know if the maxi works with asus p5wdh? I understand it'll work with every mobo,am I right?
07-17-2006, 01:22 AM
hipro5

Quote:

Originally Posted by nop

sweet hipro :slobber: :slobber:

btw, do you know if the maxi works with asus p5wdh? I understand it'll work with every mobo,am I right?

Not with every mobo......we have to test it first so as to be sure.....;)

Though if not, it's VERY easy to "make" it work with it.....;)
07-17-2006, 01:33 AM
nop

Quote:

Originally Posted by hipro5

Though if not, it's VERY easy to "make" it work with it.....;)

unsolder the coil ? :D
07-17-2006, 01:35 AM
hipro5

Quote:

Originally Posted by nop

unsolder the coil ? :D

;) :)
07-17-2006, 02:54 AM
Comp-Freak

Quote:

Originally Posted by hipro5

EDIT: I would like to add - generaly speaking - that there is NO MOTHERBOARD out there that could work OVERCLOCKED with 4 x 1GB dimms at high frequencies.....One reason is that the IMC or the Northbridge can't handle that - accualy they could do better - AND the second reason and the MOST serius, is that when they design the motherboards, they add tiny Mos-Fets on the output of the Vdimm voltage (about 40Watts -peak 80W- )......By adding 4 x 1GB modules you're OK UNLESS you're not going to overclock them by MUCH.....The modules might have a LOT of pottential to overclocking BUT the Vdimm of the mobos just CAN'T handle the load and they fail......Of caurce the user thinks that the modules can't go higher......BEEPPPP...Wrong......They can go higher that that BUT they've got NO more power to do so.......;) Motherboard's Vdimm circuit fails to feed them, so the Ram modules fail too......;)
You can SIMPLY mod your mobo so as to work WITH the DDR Maximizer and with 4 X 1GB modules ALSO.....By this way, there will be no reason not to find the max of your 4 x 1GB modules......The Maxi could provide you clean and stable Vdimm up to REAL 130Watts of power and 160Watts peak......:D ;)

Most motherboards only have 4 mem slots, that means that if you want to use the maximizer with 4x1GB you need to solder it directly to the motherbord's PCB I suppose?
07-17-2006, 03:58 AM
SMa

Quote:

Originally Posted by hipro5

You can unsolder the coil of the Vdimm and then you're free to add the Maximizer without any fear at all.....Simple as that and you'll burn nothing on the mobo by this way.....;) .....and afterwords if you want to use the mobo without the Maxi, you resolder back this coil and you're ready......No harm at all.....:)

EDIT: I would like to add - generaly speaking - that there is NO MOTHERBOARD out there that could work OVERCLOCKED with 4 x 1GB dimms at high frequencies.....One reason is that the IMC or the Northbridge can't handle that - accualy they could do better - AND the second reason and the MOST serius, is that when they design the motherboards, they add tiny Mos-Fets on the output of the Vdimm voltage (about 40Watts -peak 80W- )......By adding 4 x 1GB modules you're OK UNLESS you're not going to overclock them by MUCH.....The modules might have a LOT of pottential to overclocking BUT the Vdimm of the mobos just CAN'T handle the load and they fail......Of caurce the user thinks that the modules can't go higher......BEEPPPP...Wrong......They can go higher that that BUT they've got NO more power to do so.......;) Motherboard's Vdimm circuit fails to feed them, so the Ram modules fail too......;)
You can SIMPLY mod your mobo so as to work WITH the DDR Maximizer and with 4 X 1GB modules ALSO.....By this way, there will be no reason not to find the max of your 4 x 1GB modules......The Maxi could provide you clean and stable Vdimm up to REAL 130Watts of power and 160Watts peak......:D ;)

Only 160W peaks?
j/k ;) looks very nice

What do you mean with "coil"?
07-17-2006, 04:22 AM
blander

Quote:

Originally Posted by SMa

Only 160W peaks?
j/k ;) looks very nice

What do you mean with "coil"?

i think he means the inductor
07-17-2006, 05:02 AM
eddieate

Beautiful work there, Are these going to be avalible in the UK?
cheers, Ed :)
07-17-2006, 05:05 AM
SMa

see previous page

Quote:

Originally Posted by hipro5

Thank you guys.....:)

Already in shops here in Hellas.....

BANNER of it....from Multirama.gr....

Extremeshop......

VERY soon to Belgium, Germany, Finland, Potugal, Boulgaria, UK....etc.....;)

ASKING for resellers in FRANCE......:)
07-17-2006, 05:59 AM
k|ngp|n

Good things come to those who wait huh George? :D
Put me on the list for one bro.
07-17-2006, 06:37 AM
hipro5

Quote:

Originally Posted by Comp-Freak

Most motherboards only have 4 mem slots, that means that if you want to use the maximizer with 4x1GB you need to solder it directly to the motherbord's PCB I suppose?

Exactly.....:)
07-17-2006, 07:19 AM
Johnny Bravo

Excellent, can't wait for this, you gonna have enough units to cope with demand George?!
07-17-2006, 07:56 AM
hipro5

We've built 300 units of them and we'll see.....:)
07-17-2006, 08:57 AM
Jort

lol 300:D

good luck with the sale's george, finaly people can buy what they wanted for a few years;)

grtz:)
07-17-2006, 10:46 AM
eddieate

Quote:

Originally Posted by SMa

see previous page

Whoops, I searched for 'UK' in the thread, didn't come back with anything though:shrug:
Ed.
07-18-2006, 02:30 PM
skycrane

Damn, cant get one till the 20th

Jeeze Hippro, i cant belive your making me wait 2 more days :D

great job, now i just hope my vx4400 will handle all the power i intende to send to it ......;)
07-20-2006, 03:31 AM
hipro5

Hello......You can find them in these sites for the time been.....dealing with UK, Finland, Austria and Germany for more resellers......

PORUGAL

GREECE

GREECE

BULGARIA

ASKINKG for resellers in ITALY and FRANCE.....:)
07-20-2006, 04:56 AM
kiwi

Who are resellers in Germany and UK? :)
07-20-2006, 06:49 AM
hipro5

Quote:

Originally Posted by kiwi

Who are resellers in Germany and UK? :)

Can't say for the time been..........At least until we do our deals.......;)

UPDATE.......Our paperwork is ready for exporting Worldwide.....Stay tuned for resellers in USA, Canada, etc.......;)
07-20-2006, 03:43 PM
gotheb1ues

need a reseller in australia
07-20-2006, 04:56 PM
party animal

sweet, reseller in USA coming soon :) Nice job Hipro!
07-20-2006, 07:06 PM
3oh6

Quote:

Originally Posted by hipro5

UPDATE.......Our paperwork is ready for exporting Worldwide.....Stay tuned for resellers in USA, Canada, etc.......;)

that last line with Canada in it is all I was waiting to hear. to say this project was ambitious is quite the understatement but to see it come through in the manner that it has with a fully manufactured product and worldwide release is simply outstanding.

i look forward to the day that i can spend my money on a Hipro unit ;)
07-20-2006, 11:56 PM
hipro5

I would like to say a BIG THANKS to YOU guys that have supported me all this time.....I promise you that I won't let you down with this or with the upcoming project of ours....I will also be here to help you and support you as much as I can.....:) :toast:
07-21-2006, 12:08 AM
Movieman

Quote:

Originally Posted by hipro5

I would like to say a BIG THANKS to YOU guys that have supported me all this time.....I promise you that I won't let you down with this or with the upcoming project of ours....I will also be here to help you and support you as much as I can.....:) :toast:

I think you got it backwards Hipro, it's WE that owe you a BIG THANKS for what you have taught to all of us!:clap:
07-21-2006, 12:11 AM
\Karting_freak

Qft!
07-22-2006, 01:14 PM
berk

I'm looking forward to supporting your business...and getting some great clocks :D....good luck!!! :)
07-22-2006, 02:14 PM
hipro5

Thank you guys......:) :toast:

BTW.....Here is our site......still "fixing" it though.....:)

http://www.hipro-tech.com/

.
07-22-2006, 02:25 PM
oshua

Great looking site. I am sure there will be many great testimonals soon.
07-23-2006, 12:05 AM
SMa

So is it available now?
Launch date was 3 days ago if I remember well :D
07-23-2006, 05:48 AM
Johnny Bravo

cant wait for the UK release George!
08-02-2006, 12:55 AM
Kin Hell

Quote:

Originally Posted by hipro5

I would like to say a BIG THANKS to YOU guys that have supported me all this time.....I promise you that I won't let you down with this or with the upcoming project of ours....I will also be here to help you and support you as much as I can.....:) :toast:

George,
You don't have to make promises. Most of the guys that use this forum would have been willing to wait a whole pile longer. It's a shame your Love for your work has been hampered by all the Bull Sh*t in the Industry.
I am sure your business will prosper real soon & wish you all the very best as I'm sure every reader of this forum would also extend to you.
Nice one! :clap:
08-13-2006, 11:47 PM
sierra_bound

http://forums.vr-zone.com/showthread.php?t=86519

http://resources.vr-zone.com.sg/Shamino/hipmax/11.jpg
08-14-2006, 11:02 AM
Revv23

so any way to get these in a merica?
08-15-2006, 02:33 AM
SMa

And for Belgium?
08-15-2006, 03:18 AM
perry_78

Nice work on the design and packaging!

Most people leave that out as unimportant, but yours is a nice design.

Any chance to get one in Denmark?
08-29-2006, 05:03 AM
[timko]

Uk and Ireland customers...

DDR Maximizer V1.2 DDR2 Version (Black)

http://www.memory-configurator.com/p...ck_/index.html

At the time of posting, prices are...

123.42 GBP inc tax

Or

181.50 Euro inc tax

Available on 7th Sept.
08-29-2006, 07:50 AM
Ice-Hammer

http://www.arbeitslosenspiel.de/beg.php?id=1697
08-30-2006, 12:56 AM
SMa

Quote:

Originally Posted by [timko]

Uk and Ireland customers...

DDR Maximizer V1.2 DDR2 Version (Black)

http://www.memory-configurator.com/p...ck_/index.html

At the time of posting, prices are...

123.42 GBP inc tax

Or

181.50 Euro inc tax

Available on 7th Sept.

That's quite expensive.
Entity_Razer asks €165 for the DDR version, I hope DDR2 version will be available soon.
09-05-2006, 01:37 AM
hipro5

Hi there guys......:)

Thing is that I don't get e-mails about any updates of the threads here at XS and I can't follow all of the threads....:(

Prices will defer from country to country depending in a lot of things....VAT of each country, shipping charges, fees of each country, etc....:)

Some updates for now that I found some time to post......:)

This is the DDR2 PCB.....
It's made of epoxy material(of caurse), double sided, with golden fingers, golden logo,etc and golden edges as well.....Colour is black/gold.....Thickness of the cooper lines is 2 o.z. - doubled than usual - (for whom who knows about these) for handling more current (power).....:)

There you go.....

Front side...

http://www.thelab.gr/images/Hipro5/M..._PCB_1_jpg.jpg

http://www.thelab.gr/images/Hipro5/M..._PCB_3_jpg.jpg

Back side.....

http://www.thelab.gr/images/Hipro5/M..._PCB_2_jpg.jpg
09-05-2006, 02:33 AM
Drow

@hipro5

Nice work!:up: :clap:
When will it be available and where?
09-05-2006, 02:36 AM
celemine1Gig

Outstanding work, as always! :) Looks really awesome.
09-05-2006, 03:08 AM
SMa

Looks good :D
09-05-2006, 04:10 AM
hipro5

The photos looks too poor if someone looks it in real.....:)

For the time been you can find it here:

http://www.hipro-tech.com/resellers.html

If you take a good look in this design, I didn't place all of the "fingers" on the PCB......By "fingers" we mean the tiny "pads" that come in contact with the slot's ones for the VDD, VDDQ, Data, etc.....I've placed only the ones for the VDD, VDDQ and the VSS(ground) so as to avoid capacity between them which is not that good at than high frequency nowadays ram modules work..... ;)

.
09-05-2006, 04:12 AM
Waus-mod

Hipro..

IF u want i can hook up some shops here in holland if u want!
09-05-2006, 04:30 AM
hipro5

Quote:

Originally Posted by Waus-mod

Hipro..

IF u want i can hook up some shops here in holland if u want!

That'll be good and helpfull.....;) :D :toast:
09-05-2006, 08:36 AM
Revv23

Hi-pro i hope you are doing well, these really are terrific devices, i cant wait to get one... (its a financial situation)

Ive got lots of high volt memory just waiting for it.
09-10-2006, 01:51 AM
SMa

Does the Maximizer work on P5B (Deluxe) and P5W DH?
09-10-2006, 09:23 PM
hipro5

Quote:

Originally Posted by SMa

Does the Maximizer work on P5B (Deluxe) and P5W DH?

As for the P5WDH Deluxe, I've worked with it by unsolderind the coil that feeds the ram modules....One thing to say is that by moding it so as to achive 2.75Vdimm by it's onboard circuit and feed my Fatbodies, I reached 413MHz with Cas 3-2-2-1 and tight timings....
Pluging the Maxi on it (after I have unsoldered the output Vdimm coil of it) , I managed to reach with my Fatbodies up to 424MHz 3D benchable, with the same latencies as before......To be honnest, this was made me proud of my shelf...... :)

As for the P5B Deluxe, I haven't test it on it yet.....:)
09-10-2006, 09:51 PM
[cTx]Philosophy

Im glad to see Hipro has all things working in his favor finally..
Gratz on a great product and I hope you the best of luck in your ventures from here forth..
Its gonna be good to see how many ppl from XS who stood by you from the initial first talks of the product to the release put these babies to good use..
09-10-2006, 10:21 PM
Unseen

Quote:

Originally Posted by hipro5

As for the P5B Deluxe, I haven't test it on it yet.....:)

i will :)
09-24-2006, 08:44 AM
esdee

envy my personal Maximizer!

Thanks George :D
edit : as you can see from the full size image it has my name on it :D
http://img124.imageshack.us/img124/9...maxiin3.th.jpg
09-25-2006, 02:31 AM
Cranox

My friend got a Epox 9NDA3+ , is it compatible ?
09-27-2006, 11:54 AM
exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.
09-27-2006, 04:21 PM
GoriLLakoS

My sexy maximizer is here too..:D

Thanks George...:toast:

http://www.thelab.gr/attachment.php?s=&postid=445143

http://www.thelab.gr/attachment.php?s=&postid=445144
09-27-2006, 04:26 PM
Revv23

Sexy, where is mine? :D

Hehe got 2.75 running through my DDR2 right now but i just know i can get more mhz with a mzximizer...
09-27-2006, 04:28 PM
funkflix

I need one of this sexy beasts too! :toast:
09-27-2006, 04:45 PM
[XC] moddolicous

Quote:

Originally Posted by exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.

Kingpin has a thread in the xtreme OC section where he is putting 3.0v through his DDR2 with this and he has some pretty good results to show for it:
http://www.xtremesystems.org/forums/...d.php?t=115383
09-27-2006, 09:48 PM
hipro5

Quote:

Originally Posted by Cranox

My friend got a Epox 9NDA3+ , is it compatible ?

OFF Topic: THANK God (and FUGGER), I'm starting to receive e-mail notifications again...... :D

Now.....as for the Epox 9NDA3+ you're talking, we haven't test it yet so as to figure out if it is compatible....Do you have any pictures of it and espessialy around the Ram slots?....:)
09-27-2006, 09:50 PM
hipro5

Quote:

Originally Posted by exhausted mule

i'm considering the purchase of a ddr-2 module.

curious what are the responses and experiences of those who have bought one and pushes some sticks with one.

chances are i'll still buy it however, i'd like to hear some experiences for comparison.

There will be here soon I think....:)
09-27-2006, 09:56 PM
hipro5

BTW I JUST show our first review of it.....Though it is in French and I don't understand a word - except of the "electronical language" of it - I MUST admit that it's one of the most beautifull reviews I've ever seen......!....NOT because it's my "baby" reviewing BUT because of the "professionalism" these guys have......
Which company out there would deny to send them stuff for reviews?....I think NONE
....;) :)

Here's the link: http://www.cooling-masters.com./articles-40-0.html

.
09-28-2006, 01:09 AM
Tyrou

thanks a lot for the kind words hipro, your assistance in completing this review has been very helpful to me :)

by the way, I'm in the process of making the english version, so in a few days, you will be able to read everything ;)
09-28-2006, 02:30 AM
Cranox

Here are some pictures i found Hipro5 , if u need more/better pictures then i ask my m8 to take some.

http://cranox.com//Reviews/Epox9nda3...-9NDA3-big.jpg
http://cranox.com//Reviews/Epox9nda3...Ram%20area.jpg
09-28-2006, 02:44 AM
hipro5

Quote:

Originally Posted by Cranox

Here are some pictures i found Hipro5 , if u need more/better pictures then i ask my m8 to take some.

http://cranox.com//Reviews/Epox9nda3...-9NDA3-big.jpg
http://cranox.com//Reviews/Epox9nda3...Ram%20area.jpg

The easiest thing he can do is to remove/unsolder the coil I yellowcircled into photo OR lift it's one side up by unsoldering it and then plug the DDR PCB....... :)

http://www.thelab.gr/images/Hipro5/M...NDA3-small.jpg

In case he doesn't/can't unsolder it, he has to send us some measurments with a multimeter in some spots I could point out so as to see if it's OK or not.....:)
09-28-2006, 02:49 AM
hipro5

Quote:

Originally Posted by Tyrou

thanks a lot for the kind words hipro, your assistance in completing this review has been very helpful to me :)

by the way, I'm in the process of making the english version, so in a few days, you will be able to read everything ;)

I thank you Tyrou for the perfect review.....It's very well detailed and I kinda like it...:) :toast:

Looking forward to.....:)
09-28-2006, 04:08 AM
Rubiconx3

Wow isnt that thing nifty
09-28-2006, 02:04 PM
Cranox

Quote:

Originally Posted by hipro5

The easiest thing he can do is to remove/unsolder the coil I yellowcircled into photo OR lift it's one side up by unsoldering it and then plug the DDR PCB....... :)

http://www.thelab.gr/images/Hipro5/M...NDA3-small.jpg

In case he doesn't/can't unsolder it, he has to send us some measurments with a multimeter in some spots I could point out so as to see if it's OK or not.....:)

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?
09-28-2006, 02:14 PM
hipro5

Quote:

Originally Posted by Cranox

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?

Nothing.....Simple the motherboard will not post due to miss of the Vdimm.......You can't harm it in this way......and yes this way is 100% safe.....;)

EDIT: @ Tyrou > how the heck did you manage to take SO CLEAR shots of the whole Maxi?........What's the secret of it?.....How did you make a "white backround" behind everything/every part - EVEN at screws......?..... :D
09-28-2006, 02:23 PM
phelan1777

okay so I will be the typical ignorant consumer american for a minute and ask.

How much and where from?:D
09-28-2006, 02:39 PM
hipro5

Quote:

Originally Posted by phelan1777

okay so I will be the typical ignorant consumer american for a minute and ask.

How much and where from?:D

I think that very soon will be available in US too......;) :D
09-28-2006, 02:47 PM
phelan1777

Quote:

Originally Posted by hipro5

I think that very soon will be available in US too......;) :D

well if the price is reasonable / performance then I may get one, just to see what I can get for an OC out of it, but I am not Xtreme like most of the fanatics here, so just getting a stable decent OC would be fine with me. Though if this unit helps with stability then hell yeah I will get one.

Thank you for the work you have done and the device you have provided for the OC-ing community.
09-28-2006, 04:28 PM
wittekakker

Quote:

Originally Posted by Cranox

Aha , removing the coil is just to be on the safe side with the maximizer if i understand right. ( this is 100% safe ? )
What should happend if he unsolderd the coil and the maximizer is not plugged in ?

I think it has the same Power Circuit like our GeForce6600 cards for the contest. The coil is the only thing that is between the Vcore (GPU) and power mosfets. No coil, no voltage :) Removing it makes it safe to use the Maximizer because then no voltage can flow back to places we don't want it to flow to. Well, I guess so, right Hipro?
09-28-2006, 05:04 PM
punisher69

i read through the thread but i couldnt confirm a us/can price for your product hipro. i am wondering how much you are charging for your product.
09-28-2006, 05:16 PM
phelan1777

Quote:

Originally Posted by hipro5

I think that very soon will be available in US too......;) :D

PUNISHER /\
09-28-2006, 08:13 PM
hipro5

Quote:

Originally Posted by wittekakker

I think it has the same Power Circuit like our GeForce6600 cards for the contest. The coil is the only thing that is between the Vcore (GPU) and power mosfets. No coil, no voltage :) Removing it makes it safe to use the Maximizer because then no voltage can flow back to places we don't want it to flow to. Well, I guess so, right Hipro?

Right....;) :)
09-28-2006, 10:58 PM
SMa

hipro, when may we expect a delivery for Belgium?
09-28-2006, 11:29 PM
hipro5

Quote:

Originally Posted by SMa

hipro, when may we expect a delivery for Belgium?

Soon too....Belgium, Germany and Austria......;)
09-29-2006, 05:56 AM
Revv23

Congratulations on that review Hipro, you should be proud, it get the same mhz at almost .2v lower thanks to its stable power delivery!
09-29-2006, 10:56 AM
SMa

Quote:

Originally Posted by hipro5

Soon too....Belgium, Germany and Austria......;)

And when is soon?
I'm really longing for this wonderfull product :p
I've been waiting for +10 days now, since payment.
09-29-2006, 12:22 PM
hipro5

Quote:

Originally Posted by SMa

And when is soon?
I'm really longing for this wonderfull product :p
I've been waiting for +10 days now, since payment.

Which payment?.......:confused:
09-29-2006, 12:23 PM
hipro5

Quote:

Originally Posted by Revv23

Congratulations on that review Hipro, you should be proud, it get the same mhz at almost .2v lower thanks to its stable power delivery!

Yes, as a matter of fact I was "touched" when I show it.....:)
10-17-2006, 12:58 PM
Breathless

chants : USA! USA! USA!:fact:
10-17-2006, 01:54 PM
dolane

Quote:

Originally Posted by hipro5

Soon too....Belgium, Germany and Austria......;)

don't know if it can help but :

in belgium , and even in france , the best shop i know for overclock and performance computer is compumsa.be

i know they are interested in overclocking and new products so you should contact them ... ;)

sorry if it was already posted :slapass:
10-17-2006, 10:21 PM
hipro5

Quote:

Originally Posted by Breathless

chants : USA! USA! USA!:fact:

We're dealing...;)

Quote:

Originally Posted by dolane

don't know if it can help but :

in belgium , and even in france , the best shop i know for overclock and performance computer is compumsa.be

i know they are interested in overclocking and new products so you should contact them ... ;)

sorry if it was already posted :slapass:

Thanks M8......I'll drop them an e-mail......:)
10-19-2006, 07:01 AM
billdavis

can you put some up on ebay for buy it now
________
Iolite portable vaporizer
10-19-2006, 07:09 AM
hipro5

Quote:

Originally Posted by billdavis

can you put some up on ebay for buy it now

Just wait a bit......US reseller found.....I'll upload a link as soon as it's ready......;)
10-19-2006, 07:15 AM
billdavis

does it support ddr 3 for the near future
________
Life Saber
10-19-2006, 07:33 AM
2fink

Quote:

Originally Posted by billdavis

does it support ddr 3 for the near future

yes, it does!
10-20-2006, 01:10 PM
hipro5

USA.......here I come......:D :toast:

HIT ME HARD.....

....HIT ME HARDER...... :D

.
10-20-2006, 01:17 PM
Charles Wirth

Awesome work, huge push coming on my end too.

I thought you were coming to the US.
10-20-2006, 01:19 PM
hipro5

Quote:

Originally Posted by FUGGER

Awesome work, huge push coming on my end too.

I thought you were coming to the US.

:D :toast:
10-20-2006, 01:19 PM
Movieman

Quote:

Originally Posted by hipro5

USA.......here I come......:D :toast:

HIT ME HARD.....

....HIT ME HARDER...... :D

.

BUMP! OOPS!:eek: Did I do that?:p:
Sorry, had to! Good to see you in the US George and Congrats to Tank Guys for being smart enough to see the posibilities.:clap:
10-20-2006, 01:23 PM
Revv23

Quote:

Originally Posted by hipro5

USA.......here I come......:D :toast:

HIT ME HARD.....

....HIT ME HARDER...... :D

.

Jesus, already sold out!!! :( :( :(

I have my wallet out and everything, i dont think ill ever get one. :(
10-20-2006, 01:36 PM
hipro5

Quote:

Originally Posted by Movieman

BUMP! OOPS!:eek: Did I do that?:p:
Sorry, had to! Good to see you in the US George and Congrats to Tank Guys for being smart enough to see the posibilities.:clap:

Thanks my friend.....:) :toast:

Quote:

Originally Posted by Revv23

Jesus, already sold out!!! :( :( :(

I have my wallet out and everything, i dont think ill ever get one. :(

You'll get one don't worry.....:D
10-20-2006, 03:39 PM
Nosfer@tu

NOW START FRYING RAM FFS :D

HAHA

I hope you get RICH from this Hipro5, You deserv it if anybody does :D
Damm I hope you get PAID :D
10-20-2006, 03:49 PM
Rol-Co

thanks hipro,......just in time overhere ;)

http://82.173.172.10/Rol-Co/maxi.jpg

http://82.173.172.10/Rol-Co/maxinaam.jpg

lets see what it does to my 8500hz's :D
10-21-2006, 01:08 AM
hipro5

Quote:

Originally Posted by Nosfer@tu

NOW START FRYING RAM FFS :D

HAHA

I hope you get RICH from this Hipro5, You deserv it if anybody does :D
Damm I hope you get PAID :D

Unfortunatelly the DDR Maximizer doesn't "leave" us much profet......We hope our 2nd project will, which will show up before XMAS......;)
10-21-2006, 01:13 AM
hipro5

Quote:

Originally Posted by Rol-Co

thanks hipro,......just in time overhere ;)
lets see what it does to my 8500hz's :D

:D :toast:

I hope that you know what to do with the P5WDH if you work with it....IF not, PM me......;)
10-21-2006, 09:35 AM
Rol-Co

Quote:

Originally Posted by hipro5

:D :toast:

I hope that you know what to do with the P5WDH if you work with it....IF not, PM me......;)

soldering out the coil you mean??, yep i know, but that board is modded, so no need
wil be using on p5b dlx and biostar t , is that possible?
10-21-2006, 09:53 AM
2fink

Quote:

Originally Posted by hipro5

We hope our 2nd project will, which will show up before XMAS......;)

any informations about this "project"?
10-21-2006, 10:26 AM
hipro5

Quote:

Originally Posted by Rol-Co

soldering out the coil you mean??, yep i know, but that board is modded, so no need
wil be using on p5b dlx and biostar t , is that possible?

On p5b deluxe seems to be ok (from 4+ users so on).........on Biostar don't know.......upload a picture arround the DDR slots so as to see it....... ;)

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 12:34 PM.

XtremeSystems