Water Cooled Case Gallery

Damn conman, thats nice and clean

http://countermalucos.com.sapo.pt/interior%201.jpg
http://countermalucos.com.sapo.pt/interior%202.jpg
http://countermalucos.com.sapo.pt/interior%205.jpg

some more pics:toast:

Quote:

---

Originally Posted by jrw

What case is that Sent? Looks nice.

---

Its a Yeong-Yang Minicube :toast:

What are you using to Block your TLine Samuel?

who?? me?? LOL i am Manuel ihih

well i am using a acessorie that i have found on a garden-bricolage/shop.
i do not now how to say the correct name in english:slapass:

ok first of! dont laugh!
its a cheap, too small, and :banana::banana::banana::banana:ty q-tec... and a cheap old watercooling witch im
changing over time. it is a original waterchill! but i have changed the fan and radiator to a yate an procore heatercore.
i only have 2 fans. the yate and the 120mm in the fsp power.
i have a new power on the way btw. (mist 500w, dead silent)
so... i think my next change will be a new cpu block!
and im planning on building a case of wood. it will be alot bigger!
http://www.xtremesystems.org/forums/...4&d=1143826809
http://www.xtremesystems.org/forums/...5&d=1143826809

and i need aplause or something for getting a 8mm id\11mm od on a 1\2 fittings:clap:
http://www.xtremesystems.org/forums/...6&d=1143826809

here is my system. disregard the wiring, no one can see it because my case technically shouldnt even have a window in it but i cut two custom ones.

http://i58.photobucket.com/albums/g2...terpicture.jpg

http://i58.photobucket.com/albums/g2...Picture001.jpg

http://i58.photobucket.com/albums/g2...Picture002.jpg

http://i58.photobucket.com/albums/g2...r651/tower.jpg

yes, i realize that the cuts are crappy... i used a cutting wheel and didnt have a lot of time to fix everything up. but i really dont care. function > form

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad

Quote:

---

Originally Posted by johnanderson

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad

---

only take a metal-file and 1 hour and every cut seems perfect, the easiest way:p:

my one :banana:

http://img380.imageshack.us/img380/7...01069fq.th.jpg

http://img127.imageshack.us/img127/5...9medium1un.jpg

http://img153.imageshack.us/img153/6...emedium5cp.jpg

ooo. now thats a fancy nightclub of a box you got there bullit :D. I like it. you should ahve the uv lights sound sensitive.

Quote:

---

Originally Posted by johnanderson

viper650- you should go to mcmaster.com and order some Push-on Edge Trim to make those cuts look better. either that or electrical tape, which ive used and actually doesnt look half bad

---

ive thought about the electrical tape, but im honestly just too lazy to do it. i will soon enough and thanks for the link. ive been wondering where to get the trim

Not as purdy as some of the others.

Quote:

---

Originally Posted by REDKEN

OK here goes!
After a looong time of researching and preparation (1 year on/off researching. 3 month final preparation. 1 month modding and assembly)(yes! I took my sweet, sweet time ;) ) I finally finished my first watercooling setup :) First I would like to thank ALL the people that helped me directly and in-directly to get my rig up and running from here and other forums as well :cool:
All relevant watercooling parts:

- White Water
- MCW20
- MCW50
- 1/2 Clearflex
- 2-342 heater core (2" shroud on both sides)
- 4 Panaflos 120mm L1A push/pull (1 extra for burners)
- Iwaki MD-15RLT (shrouded)
- Lian-Li Pc 70 case (very moded)
- Rest in my sig...

http://img10.imageshack.us/img10/593/2324.jpg
http://img10.imageshack.us/img10/1322/2323.jpg

---

You did an extremely nice job of routing your tubing. You took your time and it shows.

Hello everybody. This looks like a great forum with a lot of info. Here is my current rig. I have started purchasing components to upgrade to PCI-E. I will post new photos when that is complete.

Quote:

---

Originally Posted by Hansfragger

Hello everybody. This looks like a great forum with a lot of info. Here is my current rig. I have started purchasing components to upgrade to PCI-E. I will post new photos when that is complete.

---

Looks nice! :up:

EDIT* pics dont work ON MY MAC AT WORK

saw it at home and yea good god man, switch the ports around on the block...

work fine.

thought so maybe his settings are different or perhaps try a different browser? :toast:

sorry to go off topic but does anyone have a pic of that water block that was on a forklift truck and weighed like half a Ton ?
I can't find it anywhere

Grinch for the love of god you ahve the inlet and outlet on the Storm confused.. I even put a special note in several of my guides about that for the storm.. sheehs.. when will ppl start reading..its also in the directions for the storm!

hahaha :clap:

:rotf:

very nice one bullit :D
it iis a very funny case, and i think it is just perfect ou entao boa cmo marisco:D

lol. i just noticed it IS reversed. I looked at the pics several times too. better get that fixed quickly

Dyslexic System...

hehehhe oh no!

Just got her setup - Still need to do cable management. Thinking of getting another PA160.1 in the bottom (Maybe something else...suggestions) to feed the GPU's and maybe a Chipset block to bring noise down. Do you guys think the Lang D5 will do all this or will i be in need of an upgrade......????


http://img.photobucket.com/albums/v6...g/IMG_0016.jpg

http://img.photobucket.com/albums/v6...g/IMG_0002.jpg

http://img.photobucket.com/albums/v6...g/IMG_0005.jpg

http://img.photobucket.com/albums/v6...g/IMG_0001.jpg

http://img.photobucket.com/albums/v6...g/IMG_0007.jpg

Enjoy

Topboy

A 50Z will give better temps with a PA160, because of its much lower heat dump.

If you must cool the NB, get the MCW30 or an Eddy_EK, everything else ive seen is much too restrictive. Not like a NB needs much cooling anyway.

Either pump should do Storm + 2x Maze 4 + MCW30 ok... you can upgrade to 2x 50Z or an iwaki if you want, but if youre that much after performance then i have to question why you want to harm your loop's performance with a NB block in the 1st place.

If silence matters that much to you, just slap another PA160 and the MCWW30 and be done with it, dropping in a bigger pump to counteract the nb block restriction is a bit like saving your breath to cool your soup ;)

for a silent pump go with a Laing DDC- and get a plexi top-

Looking good, but dude, cable management!

Quote:

---

Originally Posted by Mankz_91

for a silent pump go with a Laing DDC- and get a plexi top-

Looking good, but dude, cable management!

---

LOL...Yeah tell me about it and thats what i do as part of my job...HP Server rack building.

I allways throw things in.....then tweak after....Cable Man is allways last to get done.

OK so NB cooler is out....but i do want to throw another Rad in so i can cool the second GPU down.

Been watching the temps and when in this series... RAD -> Pump -> CPU -> GPU1 -> GPU2 -> RES....I am getting a difference under idle and load of 4 to 6C higher on GPU2.

So my idea is to feed the GPU2 with its own RAD.

How will this affect flow with the D5 in or should i uprate pump. Need to be able to buy in the UK.

Thanks

Topboy

nice rig topboy......what camera are u using to make those beautiful pics?

Quote:

---

Originally Posted by danstar25

nice rig topboy......what camera are u using to make those beautiful pics?

---

My other new toy....Canon EOS 30D SLR with EFS 17-85 Lens :D

Review here :

http://www.dpreview.com/reviews/canoneos30d/

Topboy

My first WC.

Pump: Laing DDC 1T
CPU: PowerX rev.2
GPU: Abadon PRO
Radiator: BIX2

Innovatek, Camozzi, and reservoir.

http://img439.imageshack.us/img439/4471/16ys.jpg

http://img328.imageshack.us/img328/3200/23dn.jpg

http://img328.imageshack.us/img328/7018/16kb.jpg

http://img328.imageshack.us/img328/3255/32at1.jpg

@itor Vga and DM-11 cpu block
@itor custom radiator



http://img148.imageshack.us/img148/1...nano0091re.jpg
http://img148.imageshack.us/img148/4...7small25zy.jpg
http://img487.imageshack.us/img487/8...14small6fu.jpg

Se ve muy bien mi amigo! :D

That looks great my friend! :D

:cool: Here are a few pics of my daily driver...

davidian, u got a link to that cpu waterblock of yours? i think it looks sexay :banana:

Quote:

---

Originally Posted by OCme

Se ve muy bien mi amigo! :D

That looks great my friend! :D

---

LOL, how are you friend!

Nice rig you have there, I love the pc70 in black, my little pc65 is, well, too little :(

Quote:

---

Originally Posted by sTaBZz

davidian, u got a link to that cpu waterblock of yours? i think it looks sexay :banana:

---

PowerX is a limited series waterblock from Poland.

It is currently unavailable.

But, look at maker's page:
click

Quote:

---

Originally Posted by Ssilencer

LOL, how are you friend!

Nice rig you have there, I love the pc70 in black, my little pc65 is, well, too little :(

---

Bien,bien amigo y tu???... me gusta tu caja. Mi caja pasada fui un Lian-li PC65 tambien...

I'm doing well my friend, and you???... I like your case. My last case was a Lian-li PC65 also...

Veo que estas usando una 50z a 13,8v que tanto mejora? no acorta la vida util?
Abandonaste el phase change?
I see you are using a 50z@13.8v, is that not risky for the pump?
Missed you from the vapor forum

13.8v is fine for it... gives it the best performance. though it probably wont last as long as it will @ 12v, but *shrug*. It'll give you nearly the same temps as an MD-20 like that...

IIRC I saw sometime ago a graph comparing the pump at 12 and at 13.8v, can anyone post that graph?

This thread?

http://forums.procooling.com/vbb/showthread.php?t=10825

Quote:

---

Originally Posted by MaxxxRacer

Grinch for the love of god you ahve the inlet and outlet on the Storm confused.. I even put a special note in several of my guides about that for the storm.. sheehs.. when will ppl start reading..its also in the directions for the storm!

---

DOH.....will have that fixed this weekend...also changing a couple parts as well...got a thermocill PA120.2 coming as well as some 1/2" tygon tubing

those are sexy rigs!

http://img107.imageshack.us/img107/7...00097bv.th.jpg

- Above the normal look on my Guitar And PC sanctuary

http://img106.imageshack.us/img106/9...00123xs.th.jpg

- "Must Have" nightly mode

http://img140.imageshack.us/img140/1...00102mu.th.jpg

- Extra Radiator and reserator with 120mm Fan,

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg



http://img134.imageshack.us/img134/5540/dscn74580ju.jpg

http://img101.imageshack.us/img101/9...emedium5pq.jpg

Quote:

---

Originally Posted by bullit

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg

---

Which rad grill are you using?
RadGrillZ?
/Thomas

AC Ryan...you can see it here.

http://www.acryan.com/_radgrillz/index.shtml

first w/c set up

http://img91.imageshack.us/img91/322...03554dt.th.jpg http://img520.imageshack.us/img520/595/110yl.th.jpg http://img520.imageshack.us/img520/1470/53cs.th.jpg http://img520.imageshack.us/img520/9816/38wb.th.jpg http://img41.imageshack.us/img41/3417/147wl.th.jpg

radiator ford transit 87 modded 1/2'' ,
hydor l20 (700 l/h) modded 1/2'',
blocks and tank are hand made by eleven (11)
cpu block 11 universal
gpu block 11 universal
res by 11

http://img.photobucket.com/albums/v4...r/DSC01500.jpg
http://img.photobucket.com/albums/v4...r/DSC01496.jpg
http://img.photobucket.com/albums/v4...r/DSC01501.jpg

Quote:

---

Originally Posted by bullit

A little update:

http://img134.imageshack.us/img134/659/dscn74536bd.jpg



http://img134.imageshack.us/img134/5540/dscn74580ju.jpg

http://img101.imageshack.us/img101/9...emedium5pq.jpg

---

What DVD Burner is that bullit?

Quote:

---

Originally Posted by damstr

http://img.photobucket.com/albums/v4...r/DSC01500.jpg

---

Could you post some inside pics?

Quote:

---

Originally Posted by vkbms

Could you post some inside pics?

---

curiosone :D :D :D

mo vedi che te combino.... :banana:


I'll have some interesting project.... :D

not exactly a case but..
http://img205.imageshack.us/img205/2...r0036zj.th.jpg
http://img205.imageshack.us/img205/5...r0040gd.th.jpg
gonna get some wormdrives or mabe some pi-thons soon, those plastic clamps are driving me nuts

My new setup:

http://img216.imageshack.us/img216/4449/pic0294si.jpg

http://img224.imageshack.us/img224/7241/pic0301ls.jpg

http://img268.imageshack.us/img268/1903/sideview9ep.jpg

http://img224.imageshack.us/img224/4375/pic0319ci.jpg

http://img146.imageshack.us/img146/6093/pic0270ps.jpg

excuse me, the mcp655/ dangerden d5 can work also in orizontal without problems?

Quote:

---

Originally Posted by FourDoors

excuse me, the mcp655/ dangerden d5 can work also in orizontal without problems?

---

Yes, but inlet shouldn't be below pump

Quote:

---

Originally Posted by maratus

Yes, but inlet shouldn't be below pump

---

Exactly. Any position is ok, except the inlet below the pump. :)

sure.
thank you very much.

Hi from Italy:)

Quote:

---

Originally Posted by EnJoY

What DVD Burner is that bullit?

---

It´s a Pioneer 109 XL

Quote:

---

Originally Posted by FourDoors

sure.
thank you very much.

Hi from Italy:)

---

ciao ALE
tino;)

Quote:

---

Originally Posted by pilota

ciao ALE
tino;)

---

ciao tino, invasione italiana :toast:

ciao ragazzi!:D

Quote:

---

Originally Posted by bullit

It´s a Pioneer 109 XL

---

Is that a custom faceplate I see on it in your pictures or just a special version of it?

Check this out...http://www.pioneerelectronics.com/pn...etailComponent

or this


http://www.cdrlabs.com/reviews/index...&page=Features

or this with the black front lik mine,i´m afraid no longer available this burner with a Lian li face.

http://www.burnworld.com/dvd-burner/...r-a09xlbbk.htm

Quote:

---

Originally Posted by vkbms

Could you post some inside pics?

---

sorry, here you go:
http://img.photobucket.com/albums/v4...r/IMG_0181.jpg

some nice rigs in this thread...


finished my build last week. i just got some triple blade delta fans to put on my thermochill rad on top and will be changing the sleeve color to black instead of green. other than that its all done.

thanks damstr.....
i'll upload my pics soon :)

Hey,

okay I've made some changes. Here we go...

http://www.forumdeluxx.de/gallery/up...009/Kiste1.JPG

http://www.forumdeluxx.de/gallery/up...009/Kiste2.JPG

http://www.forumdeluxx.de/gallery/up...009/Kiste3.JPG

http://www.forumdeluxx.de/gallery/up...009/Kiste4.JPG

http://www.forumdeluxx.de/gallery/up...009/Kiste5.JPG

http://www.forumdeluxx.de/gallery/up...009/Kiste6.JPG

here it is, specs in sig, sorry for the bad pics (cell phone camera)
http://img145.imageshack.us/img145/6541/dsc002118vk.jpghttp://img252.imageshack.us/img252/2141/dsc002069ys.jpg
http://img252.imageshack.us/img252/983/dsc002098pa.jpghttp://img252.imageshack.us/img252/3739/dsc002108gf.jpg

Aldy402 what is that for orange fan you and many others use?

Shakermaker does you really need a passive "rad" AND a trippel?

Quote:

---

Originally Posted by Hypno Toad

Aldy402 what is that for orange fan you and many others use?

Shakermaker does you really need a passive "rad" AND a trippel?

---

its a cooler master uv reactive 120mm fan, i use it to cool the hot ballistix ram

Well I've tried to get really good temps and so I ordered an Alphacool CORA 442 passive rad too. The temps are quite impressive now and thats what I wanted.
But I'm looking forward to replace my DDC+ with a D5.

Why? The DDC+ is the better pump... more head, less heat dump, quieter...

Alphacool has new Revision od the D5. So I'd like to test it.
So we will see which pump is the better one, but thanks for your advise.

Oh, the vario. Well, i guess itll be interesting to see what gives you the best temps, but even if they managed ti give it the same head as a DDC+ with top inlet, i dont see how they can solve the rather high heat dump.

I mean, if its like 5-6W higher than the old D5 itll be nearly as high as an Iwaki RD-30, and thats got 33ft head.

Keep us updated.

Shakermaker, adding another rad will decrease your performance.. your system is already insanely restrictive and adding more equipment to it wont help you.

btw, you ned to add ALOT of corrosion inhibitor to your loop if you havnt already done so. You have VERY large surfaces of aluminum and copper intermingling and it will end poorly if you dont prepare for it.

Thanks creidiki.
I'll check it out.
Radical_53 is a friend of mine and together we are going to test some pumps. After that we will have some nice results and based on that I will come to a conclusion.

@Darth Water
I use Water Wetter and I have no problems with corrosion. But thanks for your comment.

Maybe you could swap the passive rad for another active one... just a thought. That would also shorten your tubing which looks quite long here and there... maybe there's some room left for optimization.
Still I like the style, looks very clean with the matching silver components and such.

Quote:

---

Originally Posted by Radical_53

Still I like the style, looks very clean with the matching silver components and such.

---

I agree. At least it looks cool! :)

Quote:

---

Originally Posted by Shakermaker

Well I've tried to get really good temps and so I ordered an Alphacool CORA 442 passive rad too. The temps are quite impressive now and thats what I wanted.
But I'm looking forward to replace my DDC+ with a D5.

---

I suggest you just ADD another DDC+ instead of replace. You are seriously at the limit in terms of pumping power with all those hardware. Adding another one will push this pump or the D5 over its limits. You need TWO pumps to get good temps. Use Pentosin since ur mixing all kinds of metal.

finished rig...at least until i get my 165 i ordered from monarch the other day...

Quote:

---

Originally Posted by haste

finished rig...at least until i get my 165 i ordered from monarch the other day...

---

Looks very nice! :up:

This is my first attempt at water cooling. :toast:

http://img279.imageshack.us/img279/4...9medium5ws.jpg

http://img134.imageshack.us/img134/2...0medium8rt.jpg

http://img279.imageshack.us/img279/8...1medium9ib.jpg

http://img134.imageshack.us/img134/6...2medium9rv.jpg

http://img279.imageshack.us/img279/3...3medium7ds.jpg

http://img279.imageshack.us/img279/7...4medium9cf.jpg

http://img134.imageshack.us/img134/8...5medium6nr.jpg

http://img134.imageshack.us/img134/2...6medium2oe.jpg

Very nice setup there SIGfever, I have that same case, i think they look great :D

Damn :eek: thank god for Tygon, eh?

Here is my current setup, will update when Maze4 GPU top comes in from DD.

http://www.clandfa.clanservers.com/h2opic.JPG

This is my first post here @ XS :D

This was my old system, housed in an Yeong Yang 0420. I sold it when I was done with watercooling, then got back to air. Finally water started crawling up my sleeve again & I'm back on water haha!

http://www.xs4all.nl/~ramdinrs/System/System.jpg

This is my new system

http://www.xs4all.nl/~ramdinrs/System/Img_1626.jpg

gone post pics that i have at this momment ;)
setup running on a lan
http://i3.photobucket.com/albums/y90...eelding020.jpg
the full tower normal what it must be
http://i3.photobucket.com/albums/y90...r/DSC07309.jpg
bloks for my x1900xtx ready , but its in rma now ;)
http://i3.photobucket.com/albums/y90...r/IMG_0820.jpg
if u have something to ask shoot me :p

http://img107.imageshack.us/img107/698/img04536on.jpg

http://img107.imageshack.us/img107/8961/img04562cm.jpg

http://img107.imageshack.us/img107/1314/img04601ng.jpg

http://img46.imageshack.us/img46/8632/img04683wh.jpg

http://img46.imageshack.us/img46/2434/img04639gg.jpg

http://img46.imageshack.us/img46/6066/img04619rq.jpg

http://img46.imageshack.us/img46/1655/img04708nb.jpg

WB made in VN :D

http://img235.imageshack.us/img235/699/dsc03452a6iu.jpg

http://img73.imageshack.us/img73/6779/dsc03478a3bg.jpg

http://img73.imageshack.us/img73/2171/dsc03479a5ag.jpg

Little update here. :)

Changed to a Laing DDC, from a Eheim 1046 and removed the second hdd case.

http://213.202.211.105/gravedigga/pc.../ohneblitz.jpg

Quote:

---

Originally Posted by funkflix

Little update here. :)

Changed to a Laing DDC, from a Eheim 1046 and removed the second hdd case.

http://213.202.211.105/gravedigga/pc.../ohneblitz.jpg

---

were's the friggin radiator?

Just a klick on my signature! :D

1 x Evo 240 and 1 x HTF3 Dual.

This is my machine...