thats what i thought :(Quote:
Originally Posted by [timko]
anyways, i re-found afudos just to see where i got it from. its from south africa :D
thats what i thought :(Quote:
Originally Posted by [timko]
anyways, i re-found afudos just to see where i got it from. its from south africa :D
Anyone got some voltage settings they are using? I will post mine up soon, but I am still trying to get every last bit outta this board. I would really like to get 475 stable, which is getting closer.
i posted all my settings a few pages back. this is my baseline 100% prime stable though i think i can go faster or drop some volts as it is not completely fine tuned.Quote:
Originally Posted by ChaosMinionX
try re-flashing. put everything back to stock settings, which means no oc and stock volts. if that does not work then try moving your ram over to the other slotsQuote:
Originally Posted by Titus
What voltages though?Quote:
Originally Posted by ZenEffect
*edit*Quote:
Originally Posted by ChaosMinionX
guess i didnt take pics of the volts
gimme a min as im at work and dying for a cig... ill post them in 10 min
Where can i find bios 0217 ?
Quick Q: Blue or White Dimm slots for the best OC-ability:Vdimm and stability?
well, after a bit of tweaking im relativley happy; howver i think i can get a little bit more oudda my hardware...
http://img152.imageshack.us/img152/2...chemem2pd7.png
here are my settings...
http://img85.imageshack.us/img85/346/cimg1245ts7.jpg
http://img247.imageshack.us/img247/403/cimg1246pq5.jpg
http://img187.imageshack.us/img187/5221/cimg1247zv6.jpg
anyone have suggestions on how i can improve from here????
depends on mobo test them bothQuote:
Originally Posted by XtremeTiramisu
If you set everything to Stock Speed will it post?Quote:
Originally Posted by miptzi
They say the White slots, I have tested both blue and white and imo there is little difference if any at all. ppl see what they want toQuote:
Originally Posted by XtremeTiramisu
CPU Voltage : 1.475
CPU PLL Voltage :1.6
North Bridge Voltage :1.51
DRAM Voltage : 2.26
FSB Termination Voltage : 1.51
South Bridge Voltage : 1.1
Loadline Calibration : enabled
CPU GTL Reference : .67
North Bridge GTL Reference : .67
DDR2 Channel A REF Voltage : auto
DDR2 Channel B REF Voltage : auto
DDR2 Controller REF Voltage : DDR2_REF
SB 1.5V Voltage : 1.5
took the template from the maximus thread but whatever
@ericab
play with the transaction booster, i was able to get pl5 out of my ram *set as 6 but pull ins are enabled to make it 5*
everything is at stock and it still happens every few re-bootsQuote:
Originally Posted by ZenEffect
could my voltages be too high?...I have all the voltages set to 'Auto' in the BIOS but according to PC Probe my Vcore is 1.20, NB= 48C (1.36V), SB= 44C (1.07V)
what should I set my NB, SB, CPU and CPU PLL voltages to for optimal performance at stock settings?
zen, i tried playing with the booster..... ANYTHING less then what its already at, is an automatic DET RAM~ :(Quote:
@ericab
play with the transaction booster, i was able to get pl5 out of my ram *set as 6 but pull ins are enabled to make it 5*
btw my ram is Crucial Ballistix PC6400....
here are my voltages also.
CPU Voltage : 1.3625
CPU PLL Voltage :1.6
North Bridge Voltage :1.45
DRAM Voltage : 2.20
FSB Termination Voltage : 1.36
South Bridge Voltage : 1.075
Loadline Calibration : enabled
CPU GTL Reference : auto (for now)
North Bridge GTL Reference : auto (for now)
DDR2 Channel A REF Voltage : auto
DDR2 Channel B REF Voltage : auto
DDR2 Controller REF Voltage : DDR2_REF
SB 1.5V Voltage : 1.5
try your fsb strap to 400. i cant enable transaction booster any other way. plus with the fsb strap to 400 i noticed i can run lower nb volts as well.Quote:
Originally Posted by ericab
Same here , I'm so :banana::banana::banana::banana:ing sick of that Det Ram. Had is sorted on the MF now its back and hard as hell to sort out.
If I run Trans Booster on anything but Auto I get the hang.
Yeah, you guys run lower NB voltage, I cant seem to get 8GB any lower than 1.61v-1.63v
Thanks for the info, I will see what I can do with it.
@Grnfinger try booster manual with dram static control disabled..
I will give it a shot
i mean to say flash it at all stock.Quote:
Originally Posted by Titus
key things i noticed to get trans booster to work *for me* were
i HAVE to be at cas4 for pl below 7
i HAVE to set the fsb strap to 400
if i manually set pl to 5 i get system hang
if i manually set pl to 6 and do pull ins for pl of 5, it works.
now imma go eat some pizza
My bios settings.
No luck still get the hangQuote:
Originally Posted by giorgos th.
Running ram @ 5-5-5-15-3-35-6-3
Dram Static = Auto
Clock Twister =Stronger
Trans Booster =Auto
http://i237.photobucket.com/albums/f...ger/RF_Ram.png
Not bad at all but I would like to play with the setting. Anything but Auto and it wont boot
what fsb strap are you using? experiment with different straps to get it to work, thats what i did.Quote:
Originally Posted by Grnfinger