Is auto default to 2T Command fixed on this? The former two boards (A8N-SLI Deluxe and Premium) both revert to 2T when you set memory timing to Auto. Another question, will there be a Premium version of this board out soon or later?
Printable View
Is auto default to 2T Command fixed on this? The former two boards (A8N-SLI Deluxe and Premium) both revert to 2T when you set memory timing to Auto. Another question, will there be a Premium version of this board out soon or later?
X-Fi sound card sounds interesting. Makes sense to buy one if I bought a 32" LCD for this bad@$$ rig last week.
Had some fun installing the chill control on the BB modded LS yesterday lol. Then had to fine tune the unit a bit. Now I am waiting for the gfx card which sadly is still not avail anywehre. Hopefully the Egg should have it the 26th. Then I guess I will go with BFG because XFX eta is 12/15 for the EGg but BFG is 11/26
So ben is the A8N32 a keeper for you or what? What are your impressions about the mb now?
Might want to give the asus crossfire a try once its out but it is a mainstream mb and i dont think deluxe will be out much sooner than mastercard will be
grrrr, mine isn't stock at stock speeds :( time to memtest each stick i guess :( damn dfi board eats ram all day long....
Quote:
Originally Posted by CrashOv3r1De
bottom line...Asus is a keeper! as I need a rock solid multimedia and gaming machine, and this board give me that piece of mind as I'm not worrying about my expensive hardware as much when they're on it, and I really hated it when the dang pc just reboot itself while I was about to mow down the enemy or going at it with those bunny hopper! :lol: But eventually I'll get the Expert to replace my ultra-d as spare and use it for benchmark purposes.
As for the X-Fi....it's the best soundcard Creative ever made, the DAC on these cards is the exact same one that Marantz use on their high end receivers, excellent sound quality, and very clean driver/console to boot. Unlike their previous SoundBlaster Live junk bloated with useless softwares and loads of memory hog drivers.
Yeah! Asus For The Win!
Got the mobo yesterday, installed everything this evening. I got my X2 3800+ stable @ 2800 mhz! This mobo is very OC friendly imho . . . :cool:
@Vcore questions: max vcore is 1,56.. (dunno exactly) . . . so it's true: dual core CPU's have a lower max vcore.
http://valid.x86-secret.com/cache/52629.png
Some pics:
http://img400.imageshack.us/img400/5...01880ts.th.jpg
http://img400.imageshack.us/img400/8...01892dw.th.jpg
http://img400.imageshack.us/img400/5...01996wi.th.jpg
http://img400.imageshack.us/img400/8...02001ur.th.jpg
BTW, the socket is turned 90 degrees:
http://img442.imageshack.us/img442/7...ukoeler0dx.jpg
That sucks imho, my Freezer is not in a good position now :confused:
In regards to a Premium version, there is a Wifi version that is coming out shortly w/ a wifi chip(no pci card) on board. I can't think what else they could do to the board to make it a premium. And if one did come out, it wouldn't be a for a long time out.Quote:
Originally Posted by jcniest5
Always manually set your memory timings, then the auto 2T default is a moot point.
Got one on order, ETA next week, my lanparty was starting to do my head in for day to day useage, can anyone confirm if the Zalman 7700 can clear the Ram slots? I'd guess so given that the xp120 can, but I'm not sure of the differences exactly.
Really looking forward to a more stable system, thanks for the excellent info you've put throughout this thread btw Ben, Asus should give you a back hander cos you've sold the board to me to a large extent!
my XP90 fits very nicely
:woot: NICE going.Quote:
Originally Posted by All_Star
is anyone running this board with dual gtxs and a sound card ??
ben805 i was wondering how you like the mushkin memory and how well it overclocks? My ocz pc-4800 elite edition tccd has all kinds of issues. I think my old dfi might have killed it, so i am looking for some new 2x1gig. My 3800x2 will do 2700 but with a 10x multiplier i need memory that will do at least ddr 540 to get me there. i don't want anymore ocz as my current set is the 4th set of platinum since march.
All_Star, what is your revision number?
where is the revision number on these boards?
Might the voltage limitation have to do with Max T case? If people could post the max temperature listed for their chip perhaps we could work out if it just defaults based on that.
I'll be running reasonably good water cooling, and i'm debating getting this as I won't be putting it under phase, and 1.58 is a reasonably high voltage to run 24/7, even on water.
My dual core has a stupidly high Max T case however, at 71 degrees, so if that IS the problem, then maybe i'll be able to go much higher.
-Andrew
cronic....i was informed by eric from ocz , that the tccd's up to 4200/533 was ok, but the 600's wouldnt run on that board at the time of testing...maybe a bios revision will help that ....
Quote:
Originally Posted by flashnc
well that would explain why i've been pulling my hair out. i have not tried the beta bios that are out yet. maybe I will try that now and see.
Anybody tested the Peg-Link mode and it's (in)compatability with Coolbits and other graphics oc'ing utilities?
If not, could somebody do me a huge favor and experiment with it? :)
Also, what is the difference between "Normal" and "Disabled"?
Thanks IA
the 805 beta bios is no improvment with the ocz ddr600. well i'll go sit in the corner and hope for a bios that fixs it. On second thought, I think I'll buy some new mushkin redline 2 gig kit. ARE THERE ANY KNOWN ISSUES WITH IT AND THIS MB? This is what I have my eye onQuote:
Originally Posted by flashnc
mushkin eXtreme Performance 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 500 (PC 4000) System Memory - Retail
* Model #: 991493
Any oc results with it?
well someone broke into my car so I will need money to fix the glass and little bits here and there. My loving board will be in the sale section if anyone is interested.
man that sucksQuote:
Originally Posted by situman
Dunno? Can't find it anywhere. . . .Quote:
Originally Posted by jw0rd
My max TCase info:
CPU Information (CPU #1):
Standard CPUID: Family: F, Model: 3, Stepping: 2
Extended CPUID: Family: F, Model: 23, Stepping: 2
CPUID String: 20F32
Processor APIC: 0
Processor: AMD Athlon 64 X2 3800+ (Toledo)
CPU Speed: 2835.10 (315.01 x 9.0)
Revision: JH9-E6
Platform: Socket 939
Startup VCore: 1.350v
Maximum Case Temperature = 67C
Max vcore I can get is 1,6 volt (with overvolting) :mad:
Both 2GB Redline and the OCZ EB use Infineon ICs so they should perform about the same, though these sticks are very tricky to tweak...but this Asus mobo allow me to get them stable to 255 @3-3-2-8 while the Ultra-D I only got them up to 250 @3-3-2-8, these Infineon average about 250~255 and if you're lucky you might get them up to 260 3D stable, it's a different ball game to get these to work as in the past we'd always tried to get them to prime, occt and spi 32m stable but it's the other way around with these, mine passed everything else except 3D at 260 @3-3-2-8 but it's not doing me any good as I can't game at those speed, they're great at crunching numbers and scream like banshee when it comes to SPI 32M. So if you need DDR540 these sticks will not cut it.....the only two persons that could get them that high so far are Charlie and JNav89GT, I'm still playing with mine but if you want you can go to the Bandwidth section and look at Charlie's thread MUSHKIN SMOOKIIINNN. I'd posted my result and sceenies on both DFI and Asus boards.Quote:
Originally Posted by cronic
I'd played with the Peg Link for awhile and found no gain, so I just leave them on Auto....you might get something out of them if you have SLI setup :DQuote:
Originally Posted by Despotes
Quote:
Originally Posted by AndrewK
71'C.....good lord! yes I suspect this motherboard detect either the MaxTcase or Wattage consumption from the cpu and base on some of these information to automatically adjust where to put a cap on the vcore. Different cpu get a different caps I think it's a very smart for Asus to do that to provent people from frying their cpu and motherboard. 1.58~1.60v is quite a lot for air and WC. I can't even use more than 1.68v when I'm running phase change....massive heatload and tax the crap out of my compressor, and then I see people complaining about this board not having enough vcore and they wanted >1.7v :lol: