Printable View
..and here is the screenshot, it was 2921MHz :rolleyes:Quote:
Originally Posted by Dani
2921MHz SP32M with Zalman 7700CU
BTW, I set 0517BDEW with Zalman, firs boot ever with that chip straight into StressPrime2004 @ 2823MHz 1.64V, 31min has gone, lets do 24h :slapass:
Dani, awesome results :toast:
where's sobol, we need an update
Thanks Absolute_0 :)
0517BDEW with Zalman 2823MHz 1.64Vcore now for ~17h StressPrime2004 :D
So which stepping is the magic one? I've seen very good results with 0517 LBBLE cpus and the *PMW stepped ones do as before, rock!
my first venice
AMD64 3200+ 512k cache (Venice)
ADA32000DAA4BP
LBBLE 0518APDW
System
3200+ 0518 APDW water cooled
DFI NF4 SLI-D 310 official
2x eVGA 6800U PCI-E SLI 76.10
120GB WD 1200JB
650W Silverstone SLI PSU
WinXP Pro SP2
NF4 6.53 remix chipset drivers
http://www.fileshosts.com/DFI/NF4_SL...ime95_1_tn.jpg
http://www.fileshosts.com/DFI/NF4_SL...ime95_1_tn.jpg
http://www.fileshosts.com/DFI/NF4_SL...rpi-32m_tn.jpg
http://www.fileshosts.com/DFI/NF4_SL...0_22607_tn.jpg
Suicide run
http://www.fileshosts.com/DFI/NF4_SL...erpi-1m_tn.jpg
Absolute_0 im not updateing coz there isnt much to update. Im waiting for OEM to show on market or cpu from 0518 week. But there's not much info's about 0518 , as much as i seen 0518 aint good week same as 0516 wasnt ( with some exludes ). I can advice to buy if you have chance relly quick 0515 or 0517.
Greetz
LBBLE 0517 DPMW, 2.6GHz @ 1.4x1.04v (sensor display = 1.408v), 2.7GHz might work at 1.6v+ but I can't keep it cool enough with that much voltage. 2.7 is NOT stable at 1.55v though. :slapass:Quote:
Originally Posted by NiCKE^
try 2.7 with stock vcore.. the 0517 DPMW looks the best now at the moment
my LBBLE 0517 DPMW
stable as rock
2700 at 1.4v bios (sp2004 9hours// 3dmark2001se//32mb superpi)
2800 at 1.5v bios (sp2004 9hours//3dmark 2001se//32mb superpi)
:D
:woot: :woot: :woot:
How many hours Priming is "stable as rock" or did you just run SP1M :stick:Quote:
Originally Posted by TEDY
almost 9 hours while i was at work :)
My Venice 3000+ LBBLE 0516CPBW is not good.
pass 3d mark05,super PI 32MB,fold,game......but can't pass Prime :(
Thats not bad, i dont see many here that post prime over 2.7.
same 3200+ 0518 APDW trying low vcore
http://www.fileshosts.com/DFI/NF4_SL...ime95_1_tn.jpg
this thread should be stickied
GUFY, your 32M SPI result is terrible.... what's that, @100 divider for the mem? runnin 2.7GHz and a score of 40m+ is quite bad....
32M SPI means nothing for stability? yeah, right.... sure.... :rolleyes:
TodB : that's correct...
i can 32mb SPI at 320*9 very easily, while prime reboots my PC...
Overall i can bench/prime/play/spi -> 315*9 at 1.55v (1.5v cpu-z) easily :)
Gufy said that super pi 32mb pass means nothing for stability .....which is true
edit:LOL!! Tedy 1 sec :D
0517BPDW Venice 3200+
- StressPrime2004 stable for 21h 2853MHz 1.64V Zalman 7700CU
After 24h I test 2.9GHz 1.64V :stick:
Hi all,
I need some help....
Ive got a Asus A8N Sli - Non Delux
Today i had shipped to me a lovley new 3000 venice, along with a A64 Freezer :)
The stepping is; LBBLE 0517 APQW
I understand that one user on here acheived 2.8/2.9ghz with this chip, however it was watercooled. I ran the same vcore as the guy (1.45vcore) and started to clock, went from 200 to 240, in 20 fsb increments. I reached 250 and ran super pi (aswell as @ 220 and 240) Super Pi came up with an error 'not exact in round' So im assuming it meant it wasnt stable.
Details;
Ram @ 2.85v, loose timings (3-4-4-8) Ram is OCZ 1GB 4400 Perfomance Series
cpu @ 1.45v
HT @ 3
Divider - 1:1
I need some help from the xperts ;)
Cheers :toast:
Gangstar :)
Run your ram on the 150 or 133 divider to rule out the ram. Then if still not able to pass super-pi up the vcore.
Some preliminary results:
3200 LBBLE 0516DPHW
Burning in ATM at 2.7 GHz, 1.675V using CPU Burn-in, error checking turned off. Surprisingly, temps just about hit 42 C. This is a bit off isn't it? With my 3500 NC, I would see temps of upto 52 C, 1.65 VCore. Surely something is wrong.
I will drop the VCore later tonight. Also, I could get to 2.55 at 1.4V (stock) and 2.65 (1.625V). All of these are Super Pi 32M stable. RAM was manually set to about 185MHz (2.5-4-4-10).
After snooping around these forums, hehe.. noticed there is a 1T issue, put the memory to 2T and currently at 290FSB * 9 = 2.6ghz :) @ 1.45Vcore. Super Pi 1Mb Stable, will do 32mb later on. :)
Hmm, wondering if someone can help. I got a 0517DPJW 3000+, and Epox EP-9NDA3J. I turned down the multiplier to 5x, and ram to 100. My HTT/FSB goes all the way up to 355 no problem. When I put the multi back up to 9x, I can only turn up the FSB to 280, for an oc of 2520. This is regardless of vcore, stock or +2.0v. If I even go to 285, bios, cpuid, everything reads as 9x200 = 1800. At that point anything higher, even 300fsb, says 9x200.
Voltages and temps are ok I guess. Is 2520 the max of my chip? I think it's a mobo issue right, that's why it's resetting itself to 1800mhz when i push it past 280 fsb. Oh yeah, the 2520mhz is fully stable after over 12 hours of prime95. Any ideas would be greatly appreciated!
tried a bios change?