thankx guys, so far its the same for me as the regular 505 bios. still testing though.
Printable View
thankx guys, so far its the same for me as the regular 505 bios. still testing though.
I ask again
Could someone kindly send me 505 t6 121 to try
I have lan dropping so bad with 505-c18 that I am on the wifes computer to post.
Thank you in advance
Shawn
sc00by71@bresnan.net
Same here can some one kindly sent the 5/5 t6 1/21 my as will. I dont use winflash and i have bio life saver. "let the force be with you"
Pham714@comcast.net
Pham and scoob, mail with all the bioses sent :)
thanx guys for u assitance with these bios files.:toast:
so far its stabilized my 240x10.5 setting with aggressive timings.
my ram i think is not gonna like 250mhz. i can get in windows at 2.5,3,3,11 without a prob but the performance at 240 at 2,2,2,11 is better for me so far.
i am still testing now and priming as i write this.
thanx again everyone SAE, iamanoobiecheeze...and all:toast:
Wish you a good and successful testing :) :thumbsup:Quote:
Originally posted by Naasar
thanx guys for u assitance with these bios files.:toast:
so far its stabilized my 240x10.5 setting with aggressive timings.
my ram i think is not gonna like 250mhz. i can get in windows at 2.5,3,3,11 without a prob but the performance at 240 at 2,2,2,11 is better for me so far.
i am still testing now and priming as i write this.
thanx again everyone SAE, iamanoobiecheeze...and all:toast:
Sorry to be a burden but I never received the bios files SAE.
Maybe try another again ?
Or how about this address.
livingforjc1996@hotmail.com
Or this one
sc00by71@yahoo.com (zeros not O's)
One of these has to work.
Thanks again
Shawn
Hmm. I sent it to your yahoo address first... only copied and pasted it. I resent it to both addresses now. :thumbsup:Quote:
Originally posted by sc00by71
Sorry to be a burden but I never received the bios files SAE.
Maybe try another again ?
Or how about this address.
livingforjc1996@hotmail.com
Or this one
sc00by71@yahoo.com (zeros not O's)
One of these has to work.
Thanks again
Shawn
Got it! Thanks again
I'm goin in will post back with results
Shawn
Do u have your wd drive jumperless now, as I suggested? I remember u could't even load an OS. I just tried my own WD jumperless as the only drive on primary ide channel and it booted whereas jumpered to master it doesn't boot to windows.Quote:
Originally posted by Naasar
thanx guys for u assitance with these bios files.:toast:
so far its stabilized my 240x10.5 setting with aggressive timings.
my ram i think is not gonna like 250mhz. i can get in windows at 2.5,3,3,11 without a prob but the performance at 240 at 2,2,2,11 is better for me so far.
i am still testing now and priming as i write this.
thanx again everyone SAE, iamanoobiecheeze...and all:toast:
5/5 t6 1/21 reporting
Bio update A' Ok . Defualt setting in bio loaded good as well. But after i set my overclocked setting and rebooted i notice a cold boot with LED stuck at light 3. Restart button no go. Power off - Power on A 'ok. Maybe this is a good sign ;)
yes it is currently jumperless. but the funny thing is, it was this way on my abit board.:confused:Quote:
Originally posted by megatron
Do u have your wd drive jumperless now, as I suggested? I remember u could't even load an OS. I just tried my own WD jumperless as the only drive on primary ide channel and it booted whereas jumpered to master it doesn't boot to windows.
Could some one send me the 505 t6 131 and 505 t6 121 bios for a DFI Lanparty rev B. I have tried all of the 429 romsip bios as well as the 1/21 and 1/31 and I can not get my OCZ pc3700EB memory running stable at 240 bus to save my life. If it is not the memory then it is my lan or usb droping at 240 FSB or higher. I would greatly appreciate it . I own a Bios Savior so no need to worry.
Thanks
cdurant895@yahoo.com
CTD
Mail sent, be careful. First, test the 21T6... if it suits you fine, go and test the other ones too. Don't think those will do much better than the 4-29... but who knows.Quote:
Originally posted by aigatsol
Could some one send me the 505 t6 131 and 505 t6 121 bios for a DFI Lanparty rev B. I have tried all of the 429 romsip bios as well as the 1/21 and 1/31 and I can not get my OCZ pc3700EB memory running stable at 240 bus to save my life. If it is not the memory then it is my lan or usb droping at 240 FSB or higher. I would greatly appreciate it . I own a Bios Savior so no need to worry.
Thanks
cdurant895@yahoo.com
CTD
Gluck
SAE,
I received the bios, Thanks.
I am about to test them I will let you know how they work with my memory.
Gluck, we are looking forward to see ya results. :DQuote:
Originally posted by aigatsol
SAE,
I received the bios, Thanks.
I am about to test them I will let you know how they work with my memory.
would somebody be so kind to send me bios 505C18 or C31 for infinity..please - kuzman@abv.bg
No need to... :)Quote:
Originally posted by niki60
would somebody be so kind to send me bios 505C18 or C31 for infinity..please - kuzman@abv.bg
Have a look here:
http://forums.pcper.com/showthread.php?t=321614&page=1
As would I. Can anyone send me a link, or e-mail it to VoraciousGorak@gmail.com?Quote:
Originally Posted by SAE
Just looking for a good BIOS to go with:
DFI Infinity
XP-M 2400+
2x512MB Mushkin Level II Black PC3500 BH-5
5-5/121 still the best?
Try the 6-19 rev3 bios modded by hellfire on dfi-street.com/forum
It's in the AMD/overclocking section.
It's the best bios IMO, but I have not been testing tictacs new one yet ;)
And there is also one modded by Merlin, apparently some people got excelent results with that one as well. This is also @ dfi-street.com btw.
anybody tried my 6-19 3D fire... plz let me know if there is any issue on that bios
so far i receive Zero feedback.... :(
Sorry pal, did not try it yet... but I will. Don't have much time at the moment :(Quote:
Originally Posted by tictac
my USB/LAN stops working at 235 FSB can someone send me 1/21 rom too?
Bid4freedom at fastmail.FM
thanks :)