Printable View
not done the screenie yet im on msn helping someone out, but btw my explorer process doesnt get killed, it never loads in 2K period ;)Quote:
Originally posted by bachus_anonym
i know, i know... :D i run my benches with winxp down to max 61MB after 3dmark01 loads-up... there's still few services i could kill, though.
killing explorer is a lot easier than u think... but it's kind of hard to take any screenshots then :) but doable...
Has anyone gotten 4500MB/s in Sandra yet?
Yeah. Many P4 users and some A64 owner :D ;)Quote:
Originally posted by Spec3
Has anyone gotten 4500MB/s in Sandra yet?
What's worth it??? You can't even get 270 really 3dmark-stable at room temp. So it's of no practical use :confused:
who said anything about practical :D
Hehe :DQuote:
Originally posted by r3b0rN
who said anything about practical :D
For me it has to be 3d stable at least... :thumbsup:
here we go again :D
another issue is
Command Per Clock : Disable
rank update
Hey tictac :) Where's my 262 fsb :D???
211mhz with a A7N8X-X is actually on there...i have gotten 215 with mine!!!!!!!
single channel with a no name brand of pc3200
3dmark link??? :DQuote:
Originally posted by Conflict
211mhz with a A7N8X-X is actually on there...i have gotten 215 with mine!!!!!!!
single channel with a no name brand of pc3200
thats just it though...i did it using clockgen one night when Kunaak was helping me break 15,000 with my Ti4200...only registered as standard 200 in the orb
u have SAE's barton oc for the a64 user's 3dmark compare... :D
I have a question, if I turn apic off wil I need to reinstall OS, just because of that, (not counting the possibility of subsequent corruption)? Is anything required, i.e., clear cmos or reset config. data?
http://service.futuremark.com/compare?2k1=7704451
250 fsb, stock R350 :)
First uninstall apic (acpi-uniproc-pc) in windows control panel/device manager... Turn it into Standard Pc or ACPI-PC... then quit windows and turn it off in bios. Restart windows and it should work if it did not corrupt anything ;) :DQuote:
Originally posted by coop
I have a question, if I turn apic off wil I need to reinstall OS, just because of that, (not counting the possibility of subsequent corruption)? Is anything required, i.e., clear cmos or reset config. data?
thanks, I have different ram and cpu I'm working with/broiling, and may want to do a backup first.
Yeah. It's definately a good start :DQuote:
Originally posted by coop
thanks, I have different ram and cpu I'm working with/broiling, and may want to do a backup first.
Back it all up. You could end up with an unusable windows due to hal.dll not being installed right...
3D 2K1 @ 260MHz
http://service.futuremark.com/compare?2k1=7539080
DFI Infinity
BH-5 @ 3.78V
Why did you hit your ram with such voltage-tortures ;) ?Quote:
Originally posted by Fewture
3D 2K1 @ 260MHz
http://service.futuremark.com/compare?2k1=7539080
DFI Infinity
BH-5 @ 3.78V
Nice though :thumbsup:
Here's one at 2499 = 263x9,5 APIC on, cpc and all other stuff enabled :cool:
http://service.futuremark.com/compare?2k1=7787974
http://service.futuremark.com/compare?2k1=7785836
253x10, everything on. Need more vDIMM or vDD before I get any higher, 255 is max Superpi FSB
Vdimm maybe, but vdd does nothing :(Quote:
Originally posted by Kameleon
http://service.futuremark.com/compare?2k1=7785836
253x10, everything on. Need more vDIMM or vDD before I get any higher, 255 is max Superpi FSB
Makes it even more unstable. Dunno why, I did the mod as described and know it's working.
Is that even with vdd set to 1.9v or lower? I might not bother in that case, I'm pretty sure it's the vDIMM rather than the vDD holding me back - these DFI NBs are wicked :DQuote:
Originally posted by SAE
Vdimm maybe, but vdd does nothing :(
Makes it even more unstable. Dunno why, I did the mod as described and know it's working.
Yeah. I set vdd at 1,9V in bios and adjusted the mod... finally to 2.2V. But it did not do it. I always had the impression those standard 1.9V are not enough but the mod did not help at all :(Quote:
Originally posted by Kameleon
Is that even with vdd set to 1.9v or lower? I might not bother in that case, I'm pretty sure it's the vDIMM rather than the vDD holding me back - these DFI NBs are wicked :D
And setting the max to around 2V at 1.9V did not help either.