http://tof.canardpc.com/view/288a437...85dd01929d.jpg
1.45v, unstable, too hot :(
http://www.chinadiy.com.cn/html/42/n-9142-3.html
Printable View
http://tof.canardpc.com/view/288a437...85dd01929d.jpg
1.45v, unstable, too hot :(
http://www.chinadiy.com.cn/html/42/n-9142-3.html
Is it worth the upgrade from x58?
100?C!!! 4770k stock Intel burn test
http://www.youtube.com/watch?v=iz8Yi5umuRk
Toasty!
EDIT: What kind of cooling were they using?
Stock Intel bro.
Sandy Bridge & Ivy Bridge were not. I suppose Haswell will depend on the system prices. How much will the 4770K, a Z87 motherboard, and say 4x4GB DDR3 run? And how much impact will it have on AA/AAA title gaming?Quote:
Originally Posted by killerxp100
Ahh, no wonder :)Quote:
Originally Posted by hersounds
It would be even more useful if they had measured the temp around the CPU socket (mosfet area and backside of the motherboard).
No different from non-delidded Ivy.Quote:
Originally Posted by Olivon
Delidded performance and overclocking figures would be more interesting.
Massive difference in power consumption and heat dump. I would say yes.Quote:
Originally Posted by killerxp100
You go from 130W CPU (like 250W overclocked) and 30W IOH (not sure about overclocked figures, around 50W?) to less than 50W CPU (and less than 100W overclocked if you don't use the IGP) with built-in IOH. So, from 300W down to 100W.
http://tof.canardpc.com/preview2/3a3...ff7bc6e5a3.jpg
197MHz BCLK 4.14GHz, Cinebench R11.5 9pts
http://www.coolaler.com/showthread.p...=1#post3158125
I am also facing a problem with the thermal performance of the chip. I got my hands on a LP heatsink specially designed for HSW but for some reason while benching the temps reach 90+. I am investigating as to why this is occurring i have not OCed the chip at all maybe its a ES thing but whatever it is i need to return the chip and cant risk damage.
Thanks Olivon :up:
A few retail Haswell results (not mine):
http://www.eoz.lv/attachment.php?att...1&d=1369986837
http://www.eoz.lv/attachment.php?att...2&d=1369987565
http://www.eoz.lv/attachment.php?att...3&d=1369987867
4.33Ghz, 26*1.66
http://www.eoz.lv/attachment.php?att...4&d=1370004570
Could be a a bad sample or maybe a bad bios but max stable around 4.5Ghz@1.425v and it runs very hot, same as Ivy.
Haswell is worst clocker then Ivy Bridge, hotter chip, its pure crap. BCLK straps are disabled by Intel with Locked chips, but unlocked for Unlocked chips!!!! Why?
All in the name of "good enough computing" for the masses and "power efficiency" especially for the mobile platform market. Pretty much dictated and proven by the economic rise and prominence of Apple.
Hmm might just wait for ivy e then unless 780s benifit on pcie 3 (which I doubt)
Not a bad sample, every review I've seen shows that Haswell OCs worse than Ivy.Quote:
Originally Posted by kiwi
exactly, my own haswell 4770K is worst ocer then year old 3770KQuote:
Originally Posted by HKPolice
I fail to see where "tock" is here? Just some minor ipc upgrade and lots of noise about avx2, and that's it. This is the lousiest release since pentium4.
Meh. I was hoping to upgrade to the 4770k but more power consumption and 5% more ipc coupled with no extra frequency headroom leaves me no choice but to pass. Even the iGPU seems slow, i was expecting it to be around 70% faster than ivy's but it seems more like 35%. I hope these benches are wrong but i doubt that.
I' still impressed with Haswell's design on paper, too bad we have very diminishing returns in legacy software. The iGPU is nice upgrade to HD4000's level but it still fails to come close to 7660D- it's 27% slower on average according to the review @ inpai.
Lol, INPAI is wrong in testing methody. They are used at haswell enhanced turbo profile from motherboard vendor, not Intel turbo :-)....i7-3770k with Intel turbo. So a bit cheat for better Haswell results.Quote:
Originally Posted by Olivon
lol let's just hold off until decent reviews come out before we go headless chicken mode.
-PB
Aww, I push headless chicken mode button, have no clue how disable.Quote:
Originally Posted by paulbagz
How you put head back on?
Using winblows 8.1.