Anyone with one of those batches? :
3951A807
3001A510
3001A547
3002A879
PS: please stop spamming this thread with 920 results ;)
Printable View
Anyone with one of those batches? :
3951A807
3001A510
3001A547
3002A879
PS: please stop spamming this thread with 920 results ;)
؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟؟Quote:
Originally Posted by xmannn905
4.1 @ 1.270. Seems like a nice OC and a low amount of voltage for this OC. Even with this low voltage my CPU loads around 70C on water!
3951A690
u have the same batch like me and is good batch i using x22 super stable 4ghz @1.2v QPI 1.375vQuote:
Originally Posted by damstr
I can not get stability with mult 22x. 21x seems to be perfect, even with 22x more 1.325vQPI to 183, bclk not like LinX.
I'm on R2E @18xx BIOS, my 930 atch is 3001A624.
Me too, when I use 22x it either needs too much voltage or it's not stable.Quote:
Originally Posted by 8800's@over
works best on 21x for me so far.
Quote:
Originally Posted by jVIDIA
Batch 30001A547
4.2 Fully stable
[IMG]http://hostimage.co.uk/image-0F69_4BBDB0E5.jpg[/IMG]
Batch 3001A624
http://img301.imageshack.us/img301/4472/450mins.png
vCore: 1.2500v
vQPI: 1.2250v
Dram : 1.5v
vNB: 1.01v
http://img528.imageshack.us/img528/5441/dsc05216m.jpg
http://img188.imageshack.us/img188/1934/dsc05217dp.jpg
Anyone with a 3002A ?
Any idea on 3952A521 ??
I am getting a nice deal on them, he does not have any 920's only 930's !!
Mine's been fine with a 22 multiplier, luck of the draw I guess.Quote:
Originally Posted by 8800's@over
They are fine with the 22x multi until you start pushing the chip hard... Like past 4ghz with HT on.
Do you think the i7 930 is a better cpu to OC vs one Xeon w3520 ?
Totally depends on the batch.Quote:
Originally Posted by jVIDIA
I have mine stable at 4.2GHz HT off. I will try to go higher sometime.
Report max bclks please
I have 3001A480 COSTA RICA
Run that under chilled H20 (near zero) and LN2 (-60...-70)
squeezed only 220MHz bclk or so :(
max valid
http://valid.canardpc.com/cache/screenshot/1110829.png
http://hwbot.org/signature.img?iid=3...se&iehack=.jpg
http://hwbot.org/signature.img?iid=3...se&iehack=.jpg
Then flashed my P6T Deluxe board with P6X58D Premium bios, enabled QPI Slow mode (x12 multi for uncore) and got 230mhz bclk
http://valid.canardpc.com/cache/screenshot/1123009.png
But that's unbenchable in 3D, perf is stupid with x12 uncore
How to get bclk past 220? :(
I got 4.4 stable last night at 1.45volts! woot.
im also stable 4.4@1.456v
4.1GHz / 1.28750vCore / 1.2650vQPI
http://img153.imageshack.us/img153/7504/24927525.jpg
Batchs please ?! :up:
update:
bclk: 200 mult: 21x uncore: 3.2Ghz
vCore: 1.33125v
vPLL: 1.82192v
vQPI: 1.23750v
IOH: 1.153v
Stable. Batch 3001A624
Anyone's heard of 3001A779? Wonder if it's worth the trouble...
yes me 3002a688Quote:
Originally Posted by jVIDIA
http://i76.photobucket.com/albums/j1...assedi7930.png
[IMG]http://i76.photobucket.com/albums/j1...assedi7930.png[/IMG]
Quote:
Originally Posted by jVIDIA
THANK YOU FINALLY
as OP im really sick of ppl saying "my 920 is better than your 930." if this is you, go buy a 930, and put into it the same ammount of time you have put into your 920s. come back in a year and then sqwak at the guys with the i7 935s. or whatever is next. Fanboys piss me off. /flame off
Very nice chip. 4.2 with 1,28v is very good for what I've seen with a i7 930! Is it stable?Quote:
Originally Posted by railmeat
Lets hope the 2nd week is a good week :D
I've got in a local store one 3002A879 and some 3001A's.
Anyone else with a 3002A ?