Post your C3 Test Results! (new title)

Printable View

Show 100 post(s) from this thread on one page

12-14-2009, 11:50 AM
feniksgod

I canceled the cpu. My CPU now make 4Ghz and will make 4,1Ghz with air-cooling. I will search 4,3-4,4GHZ full stable on 965 C3 if anyone know what stepping CPU i will have to search. I would be very grateful. :(
12-14-2009, 11:58 AM
Zeus

When you found it give me a call, i would like one too.
12-14-2009, 12:03 PM
Titan7171

Quote:

Originally Posted by feniksgod

I canceled the cpu. My CPU now make 4Ghz and will make 4,1Ghz with air-cooling. I will search 4,3-4,4GHZ full stable on 965 C3 if anyone know what stepping CPU i will have to search. I would be very grateful. :(

I dont think there are any that will do that yet:shrug:
12-14-2009, 12:16 PM
feniksgod

Quote:

Originally Posted by Zeus

When you found it give me a call, i would like one too.

OK at least 4200Mhz, with what week i will get 4,2Ghz :(
In my country that I know only 10 cpu C3 has came :( and the choise isn't very big :(
12-14-2009, 12:30 PM
Zeus

It depends on what you're after mate, my cpu can do 4.2GHz pretty easy on 1.48V but it reboots after a few minutes of Prime blend.

I could use it for webbrowsing and email and stuff like that though. I decided to back down some and run it at 4.1GHz which is Prime blend stable at 1.46V.
12-14-2009, 12:50 PM
feniksgod

I "remodel" DVD and Blu-Ray and because that 30minute prime blend is prefer for stable system :)
12-14-2009, 02:40 PM
FlanK3r

sometimes newhere about my C3 AIR
idling at 4500MHz :D
http://img13.imageshack.us/img13/8071/4500mhz.png
12-14-2009, 03:52 PM
beta

nice one FlanK3r :up:

what was the cpu voltage?
12-14-2009, 04:04 PM
FireDragon

CPU-z say 1.55, or do u mean what bios says?

Dragon
12-14-2009, 04:19 PM
beta

nope, I mean cpu vddc in aod
12-14-2009, 10:47 PM
FlanK3r

Quote:

Originally Posted by beta

nice one FlanK3r :up:

what was the cpu voltage?

real CPU vcore was really 1.55V (watch at my link in preview post, its more there-superpi, max validation, cinebench, wprime...)
12-15-2009, 08:52 AM
FlanK3r

Cinebench x86 13 456points
http://img94.imageshack.us/img94/478...160mhz2842.png

3D mark 2006 with default clocks HD5770
http://img692.imageshack.us/img692/3...9mhz2717mh.png

And :up: superpi 1M under 16s, uff :) 15.859s
http://img692.imageshack.us/img692/3...mhz3000mhz.png
12-15-2009, 10:54 AM
sinar

I got 0944FPMW here, will slap it with single stage. I hope it will clock good

Edit: Here we go

@ -12C in bios
ACC auto
Unleashed mode enabled

http://img192.imageshack.us/img192/6...eenshot481.jpg
12-16-2009, 01:19 PM
sinar

With a little bit more cold, 5Ghz+ and NB @3.5G is possible with this 0944FPMW
12-16-2009, 01:56 PM
Oliverda

Quote:

Originally Posted by sinar

With a little bit more cold, 5Ghz+ and NB @3.5G is possible with this 0944FPMW

Can you test it with air cooling?
12-16-2009, 06:51 PM
charged3800z24

Well since I was not able to crossfire the 5770 and 5850, here is a single 5850 run at 4.3ghz

Phenom 965BE C3 4.3ghz/2400NB
8GB DDR3
5850 single 775/1100
Win 7 64bit
Cat 9.11

= Compare link =

http://3800z24.info/Phenom/965/5850-4.3ghz-965-3d06.jpg
12-16-2009, 06:57 PM
crazydiamond

mind running it on win7 64bit with settings as close as you can get to these (comparing it to my 4870x2):

http://i70.photobucket.com/albums/i8...5htthighnb.jpg
12-16-2009, 07:00 PM
FireDragon

Nice one Charged!! my stock 06 run with my 5770 was 16,293 (memory at 1300 cas 9-9-9) as that it is what it set stock, just changed them to 1600 6-6-6 and did a burn in for my TIM, letting it set for a few atm, but ill have a few worthwhile posts in this thread here in a little bit lol

Dragon
12-16-2009, 07:07 PM
B-Shot

http://img194.imageshack.us/img194/1...nshot004fl.png
A Dirty run with $2 silicone TIM and my 955 settings:shrug:
12-16-2009, 07:16 PM
charged3800z24

Quote:

Originally Posted by FireDragon

Nice one Charged!! my stock 06 run with my 5770 was 16,293 (memory at 1300 cas 9-9-9) as that it is what it set stock, just changed them to 1600 6-6-6 and did a burn in for my TIM, letting it set for a few atm, but ill have a few worthwhile posts in this thread here in a little bit lol

Dragon

Looking forward to the post. Right now I am running a vantage run. i will try out afterburn to see if I can OC it more, not sure since 775 is CCC limit.

Edit: here is my Vantage run. These are not optimized results, I will try those later. I am in a hurry tonight lol.

= Compare Link =

4.3ghz 965BE C3 2400NB
5850 775/1100
Win 7 64bit

http://3800z24.info/Phenom/965/Vanta...850-single.jpg
12-16-2009, 08:46 PM
Buckeye

My first test runs with new kit of RAM, so still shaking this down.

http://img685.imageshack.us/img685/5...0mhz665870.jpg
12-16-2009, 09:25 PM
charged3800z24

Quote:

Originally Posted by crazydiamond

mind running it on win7 64bit with settings as close as you can get to these (comparing it to my 4870x2):

Hey Crazydiamond, were you asking me? I can if you want, I would just need to increase my NB and set the mem a lil lower. I was in Win 7 64bit on that run. If you were not asking me then safely ignore this post LOL :p:

Quote:

Originally Posted by Buckeye

My first test runs with new kit of RAM, so still shaking this down.

That was a nice run. What RAM you using there?
12-16-2009, 09:55 PM
crazydiamond

Quote:

Originally Posted by charged3800z24

Hey Crazydiamond, were you asking me? I can if you want, I would just need to increase my NB and set the mem a lil lower. I was in Win 7 64bit on that run. If you were not asking me then safely ignore this post LOL :p:

ya i was asking you lol i was just curious because you had a pretty good score w/ lower nb and wanted to see how it did w/ same clocks. had some pretty cold air tonight, was trying for 4.4 but couldnt make it through the cpu tests :shakes:
12-16-2009, 10:13 PM
Buckeye

Quote:

Originally Posted by charged3800z24

That was a nice run. What RAM you using there?

Thanks :)

Dominator GT 2000mhz 8-8-8 kit
12-16-2009, 11:17 PM
sinar

Quote:

Originally Posted by Oliverda

Can you test it with air cooling?

I will.

ACC disabled
Vcore @ 1.675 in bios
-9C idle cpu temp. in bios

This old single stage crying to uphold the load

http://img33.imageshack.us/img33/572...enshot485s.jpg

Show 100 post(s) from this thread on one page