800D Blood+　Project

Hi Noeru

I did not say to you anything. I also possess Corsair 800D (that I like). Your remark is very sensible! :)
Things are so made, we cannot always gather all the advantages. He arrives however, that pass right by the perfection without obtaining him...it is sometimes contrary! Especially when we spent many efforts to reach there.

Noeru, I want to make you thanks. I followed your worklog since the beginning, and I have very minutely and for a long time studied the photos which you made of Obsidian. And it is with your help, thanks to you, that I discovered how the case was consu...and I bought it. :up:
I continue to follow all your updates. In particular the improvement consisting in modifying the position of the power supply to install one radiator 120.4 interests me a lot. It is as well the modification as I thought of making.

Very attractive photo of Airu :p:

A dog and a high performance GPU together ... you're in my version of heaven haha!

A small correction : When I wrote "I did not say to you anything", I thought of saying "I did not say everything to you, tell you all my story"!
Before any thing, it is my English which needs perfection! :down: :rofl:

Thank you　all:)
Sorry for my bad English:p:
Attachment 105115


Attachment 105116


Attachment 105117


Attachment 105118


Attachment 105119

Attachment 105120

Attachment 105121

Attachment 105122

Set woterBlock

Attachment 105188

Attachment 105189

Attachment 105190

Attachment 105191

Attachment 105192

Attachment 105193


Attachment 105194


Attachment 105195


Attachment 105196


Attachment 105197

EK made me drool with these blingy backplates, really love them :D
sick hardware noeru, will get the same cut in a half and in other color soon :rolleyes:

Quote:

---

Originally Posted by aka_GK

EK made me drool with these blingy backplates, really love them :D
sick hardware noeru, will get the same cut in a half and in other color soon :rolleyes:

---

Hi aka_GK :)
Like you said:p:


Attachment 105241


Attachment 105242


Attachment 105243


Attachment 105244


Attachment 105245

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo! :up:

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

Love the colour of the fluid. Suits the build very well!

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

Quote:

---

Originally Posted by manu_D

Hi Noeru

Beautiful body, and impressive mechanics. Thank you for photos.
Bravo! :up:

---

hi manu_D
Thank you happy:)

Quote:

---

Originally Posted by ipuoL

the cards come out very nice and the fluid looks good, but the tubes .. will you change these ones? Because they let the nice red glue pink and a little bit misty

---

hello　ipuoL　

LED lights for the front, I see a strong pink:shrug:

Quote:

---

Originally Posted by imersa

Love the colour of the fluid. Suits the build very well!

---

very very thanks:) BooldyRED is TFC F-1 RED+Purple+Blue　mix

Quote:

---

Originally Posted by Blacky

Hey neoru which is the measurement between bottom & zone division plate (where you have the the XSPC 220 rad)? Could a SR-1 rad could fit standing down there (5.2")?

---

Hello　Blacky:)
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.:(

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

Quote:

---

Originally Posted by churchy

153mm wide SR1 is one for 140mm fans. SR1 for 120mm fans is 133mm wide (but probably too wide anyway).

---

hi churchy
yes this rad 12cm fan:)
Sheraudo structure for the side that is, I have a large margin

https://www.coolinglab.co.jp/index.p...roducts_id=576

I am the MIPS RAM Cooler 6 'Corsair Edition' I make friends with the head of the acrylic.
http://www.mips-computer.de/
CAD for that:up:

Attachment 105415

Attachment 105416

Quote:

---

Originally Posted by noeru

Hello　Blacky:)
XSPC　RX the width 125m / m, HWLabs SR-1 is 153m / m process without entering so is.
Besides I XSPC HWLabs GTX · GTS · SR-1 I did not tried all
The height of the base about 128m / m is.:(

---

Oh! so the SR-1 won't fit Orz

I guess I'm going with XSPC since MCR220 won't fit either (128m) would be kinda risky!

Thanks Noeru /bow :)

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

Quote:

---

Originally Posted by imersa

Been following lots of 800D builds as my friend is doing the same.
This has to be one of the best i've seen! Love the work mate!

---

Hello imersa :)
Thank you　I get that nice little reference, we will promote the:)

Hey Noeru do you have a photo of the zone division plate alone?

Quote:

---

Originally Posted by Blacky

Hey Noeru do you have a photo of the zone division plate alone?

---

Hi Blacky Sorry for the late:)

Version of the picture looked a partition, but it was no:(

Attachment 105541

Thanks noeru :)

great build :)

The colours look perfect to me!

beautiful Nice job!