G.Skill Ripjaws DDR3-2000 CL9 2GB x2 - 2000MHz kits under 100$!!??

can you guys tell me the VTT/QPI voltage you need to hit 2000 9-9-9 (rated timings)

I think part of my struggles is having to keep Uncore frequency lower. Maybe I should invoke the 22x multiplier to see.... My VTT seems to need like 1.53-1.55 or so to hit that 4ghz Uncore even though RAM is at only 1900mhz. I brought Uncore down from 2x+1 to 2x (21x down to 20x) and the RAM was fine and I could get away with 1.45 VTT. But as I ramped BCLK to 195 (1950mhz RAM) it seemed I needed to ramp VTT back up to 1.5. If I hit 200 BCLK I'm guessing I'm gonna need close to 1.55.... maybe its safer to try using x22 CPU multi for a lower BCLK... shrug.

VTT needed for 2000 is going to depend on your particular CPU's IMC, though the general range seems to be between 1.35~1.55v with some CPUs needing 1.60v+.

Is 1830 6 8 6 24 1t good?

Quite good, Im sure you could run it at 6/7/6/24/1T quite easily..

stable i don't think, i did try but i don't run stable

Hey guys...I've bought a kit of 16000CL9D-4GBRH and just removed the HS to see what's under...I was hoping to see Elpida BBSE etc etc but all I got was some -almost- blank chips with some numbers (E949A8B0941D)..I took a picture but it's a mess..So I dont think it's helpful..So what are these?PSC?

http://img708.imageshack.us/img708/9...7140824.th.jpg

The person that can make anything out of that picture deserves a free ram kit...

I already told you the picture is a mess, that's why I've written the numbers on the chips..

Those chips are probably OEM chips by PSC or Elpida.

Elpida i think,they are bigger that typical PSC

OEM meaning? :p Good enough for the recycle bin? :D

elpida bbse oem

Oh.. :| Thanks guys..Anyway..The bsods are probably caused by wrong bios settings..I hope at least.. :( Thanks again :)

Quote:

---

Originally Posted by gregorisvas

Hey guys...I've bought a kit of 16000CL9D-4GBRH and just removed the HS to see what's under...I was hoping to see Elpida BBSE etc etc but all I got was some -almost- blank chips with some numbers (E949A8B0941D)..I took a picture but it's a mess..So I dont think it's helpful..So what are these?PSC?

http://img708.imageshack.us/img708/9...7140824.th.jpg

---

Take a good look at the shorter side of the chip. If you see exactly the same as a picture below then you got BBSE. :) There should be no tiny copper dots on the white line.You may need a magnifier to see it.

http://img155.imageshack.us/img155/7403/dsc8511f.jpg

Here's my 16000CL9D-4GBRHD.

http://img199.imageshack.us/img199/8451/dsc8509.jpg

Good luck!

GBRHD?? Your's are 2000 1.6v mine is 1.65V..Anyway :D Thanks a lot..What are your results? (to compare them with mine)

I took some better pictures...
http://img148.imageshack.us/img148/7...01191yo.th.jpg

http://img199.imageshack.us/img199/4...01199co.th.jpg

Quote:

---

Originally Posted by gregorisvas

GBRHD?? Your's are 2000 1.6v mine is 1.65V..Anyway :D Thanks a lot..What are your results? (to compare them with mine)

I took some better pictures...
http://img148.imageshack.us/img148/7...01191yo.th.jpg

http://img199.imageshack.us/img199/4...01199co.th.jpg

---

Looks like you got BBSE there. Congrats!

4GBRHD The "D" means the cooling fan is included in the kit. Mine can do 2133/9-9-9-27 1T @1.65v.
Didn't try anything higher since it couldn't do 2133/7-9-7-20 like my 17000CL8D-4GBXM. So I sold it :p:

I'm on AMD so 2133 isn't really an option :p

The BBSE with proper screening also found in the 16000CL9D-4GBRHD as well.

http://www.picza.net/uppic/pic/2011_...99a39aa39e.jpg

P.S. Picture credit to the original owner.

Check your pm :p :D

Gregorisvas i answer your pm here :D

we have 2 kind of BBSE
marked BBSE DJ_? and batch number best one for OC
OEM BBSE starts with ?9XXXXX batch number all with E9XXX are good
i have 2133 9-9-9-24 perfect storm kit 3 X 2 and they are very old
Trident 2000 9-9-9-27
Ripjaws 2000 9-9-9-27 1,6
and new RipjawsX 2133 8-9-8

i can say 99,99% of memories 2000 or higher with 9 tRCD are BBSE or hyper
PSC can't do tight tRCD at these frequences

BTW PSC always starts with X??..... XEY,XDT, and another 10 batchs

Thank you very very very much :D ....aaaand I'm about to break my kit :D 1.65 1600 7-8-7-24 and if I leave the PC idle for long it bsods :D No reason..

Quote:

---

Originally Posted by hiwa

BTW PSC always starts with X??..... XEY,XDT, and another 10 batchs

---

Are you sure about that? I've seen some PNs starting with Txx, for example TGX894A3G-A, TGY016A3G-A, THS556A3G-U or THS463A3G-W, mostly on Exceleram sticks but also on Ripjaws X sticks.

Quote:

---

Originally Posted by Don_Dan

Are you sure about that? I've seen some PNs starting with Txx, for example TGX894A3G-A, TGY016A3G-A, THS556A3G-U or THS463A3G-W, mostly on Exceleram sticks but also on Ripjaws X sticks.

---

Chips with code Txx and end with 3G-A(3G-U and 3G-P)are also PSC but newer batch.

http://img856.imageshack.us/img856/333/dsc8561w.jpg

P.S. hiwa is right about the tRCD.

Quote:

---

Originally Posted by hiwa

BTW PSC always starts with X??..... XEY,XDT, and another 10 batchs

---

i said and another 10 batchs :D

Quote:

---

Originally Posted by Don_Dan

Are you sure about that? I've seen some PNs starting with Txx, for example TGX894A3G-A, TGY016A3G-A, THS556A3G-U or THS463A3G-W, mostly on Exceleram sticks but also on Ripjaws X sticks.

---

I told you the Team 2200 had BBSE :p: - now you have to believe it :D - btw, my geil 2133 Evo one could do 2250 9-9-9 and I think Geil only used PSC, didn´t they?

P.S. @ Theix my 2000 GBTD can do 2133 7-9-7 :D maybe you should have given TRAS 23 and it would have worked, but they are sure no match for the 17000 C8^^