Printable View
So are some pretty Xtreme volts not helping this RAM clock higher at the lower settings? Just curious Enjoy why you are sticking to 2.1v when Fatbody begs for 2.7ish? Are the results not scaling well at all with the extra juice? I am just trying to figure out why all the results posted so far have been with <2.3v .
well people say that 2,5V+ could damage the ram. so people are just careful.Quote:
Originally Posted by Ad Rock
Quote:
Originally Posted by Ad Rock
Fatbody's with generic JEDEC pcb such as these will die very quick with 2.3v or higher. This is taken right from Tony's mouth. The same goes for most D9. 8-Layer PCB helps a bit, but not much.
I wouldn't use more than 2.25v with these 24/7. I plan on running these at 900MHz 4-3-3-6 once I'm done.
enjoy yo can make peronsalitzated SPD ?
i search for make rhe D9 to 5-5-5-10 800 and 667 4-4-4-10
yo can do it?
enjoy here you here?
Ok...Tony has sent me a new revision of this SPD. It's the Micron spd that came on the sticks, with 800MHz table added, and timings greatly tweaked all across the board. Also has my custom part number. ;)
I've been running them at 4-3-3-8-3 now on this spd @ 900MHz w/ 2.2v. :)
Any of you who have these ebay fatbodies should give this spd a try. You'll need SPD Tool to flash it of course.
Very good, now can we have the custom spd please EnJoY :p:Quote:
Originally Posted by EnJoY
Cheers!
It's attached in my last post now...I coulda sworn I did it the first time. :confused:
It wasn't there the first time :)
Thanks for the upload!
What is a good SPD Tool flasher? Is this ok?
http://forums.techpowerup.com/showthread.php?t=20349
That's the only way to go. :thumbsup:Quote:
Originally Posted by Rudyn
this SPD its for D9DQW 1GB Stiks? :)
Yes it should, like all those D9 stuff from eBay.Quote:
Originally Posted by AcUaViVa
http://img157.imageshack.us/img157/6763/d9ebayky5.png
EnJoY & rudyn
this is my result , its posible to make default to 400 4-4-4-10 ?
or any guide to make changes of spd ?
and check out de 266 mode
thanks Enjoy, will try it out.
Hope there will be another release with improvements ?? :toast: :banana:
You don't want to make the SPD any tighter than it is, even if you sticks can do 3-2-2 @ 400...that would drastically decrease their compatiblity. When writing SPD you want the perfect compromise of performance and compatibility. With sub-timings, you lean more towards performance. With the main timings, you lean more towards compatibility. This SPD now, in my opinion, has the perfect balance. Check out the sub-timings in SPD tool and compare them to the original....big differences, much tighter in this new version. :)Quote:
Originally Posted by AcUaViVa
whell only like to do it's check out 533 MODE and only have 667 and 800
and left 677 4-4-4-10 and 800 5-4-4-10 ? it's possible?
Hey can someone with a p5b deluxe try and see if this ram will work with these settings?
e6600 9x380
2gb fatties 2.25v 4-4-4-12 @ 950MHz
Fatbody D9 2 gig kit.
ends in 5 hours on Ebay.
just found it.
http://cgi.ebay.com/2GB-DDR2-800-CL4...QQcmdZViewItem
Nice find, but IMHO, $250 is a little much for unbinned DQW. This stuff probably won't hit any exceptional speeds. Better to put a little more cash and get a new set of D9GMH-based memory in my estimation.
this 2gb kit just sold for $180
http://cgi.ebay.ca/ws/eBayISAPI.dll?...4033&rd=1&rd=1
That's true, but I paid really cheap for my 2GB fatbody so I have no complain there :DQuote:
Originally Posted by Gautam
Still using 4th kit of BH5 UTT godness, but never messed with DDR2 memory, so ill ask some questions.
Does these fatbodys on ebay with jedec PCB's can do 4-3-3-x with 2.25v average? For price under 200$ its cheaper than generic ram. Afaik fatbodies are not compatible with some boards, but does they work on i680 and RD600?
How much voltage can I use with benching?Quote:
Originally Posted by EnJoY
Another fatbody 1gbx2 kit on ebay.
http://cgi.ebay.com/Crucial-Ballisti...QQcmdZViewItem
900mhz cas4 at 2.2v is bout the best you can get.